STF110N10F7

STF110N10F7, STP110N10F7 N-channel 100 V, 5.1 mΩ typ., 110 A, STripFET™ VII DeepGATE™ Power MOSFETs in TO-220FP and TO-220 packages Datasheet - production data Features Order codes VDS RDS(on) max 100 V 0.007 Ω STF110N10F7 TAB STP110N10F7 1 2 3 1 TO-220FP 2 ID PTOT 45 A 30 W 110 A 150 W • Ultra low on-resistance 3 • 100% avalanche tested TO-220 Applications • Switching applications Figure 1. Internal schematic diagram Description These devices utilize the 7th generation of design rules of ST’s proprietary STripFET™ technology, with a new gate structure. The resulting Power MOSFET exhibits the lowest RDS(on) in all packages. '7$% * 6 $0Y Table 1. Device summary Order codes Marking STF110N10F7 Package Packaging TO-220FP 110N10F7 STP110N10F7 July 2013 This is information on a product in full production. Tube TO-220 DocID024058 Rev 2 1/16 www.st.com 16 Contents STF110N10F7, STP110N10F7 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/16 .............................................. 9 DocID024058 Rev 2 STF110N10F7, STP110N10F7 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Unit Parameter TO-220FP TO-220 VDS Drain-source voltage 100 V VGS Gate-source voltage ± 20 V ID(1) Drain current (continuous) at TC = 25 °C 45 110 A Drain current (continuous) at TC = 100 °C 32 76 A Drain current (pulsed) 180 415 A Total dissipation at Tc = 25 °C 30 150 W ID (1) IDM(2) PTOT (1) EAS(3) Single pulse avalanche energy TJ Operating junction temperature Tstg Storage temperature 490 mJ °C -55 to 175 °C 1. This value is rated according to Rthj-c. 2. Limited by safe operating area. 3. Starting TJ=25 °C, ID=18, VDD=50 V. Table 3. Thermal resistance Value Symbol Parameter Rthj-case Thermal resistance junction-case Rthj-amb Thermal resistance junction-amb DocID024058 Rev 2 Unit TO-220FP TO-220 5.00 1.00 62.50 °C/W °C/W 3/16 Electrical characteristics 2 STF110N10F7, STP110N10F7 Electrical characteristics (TCASE=25 °C unless otherwise specified) Table 4. On/off states Symbol V(BR)DSS Parameter Test conditions Drain-source breakdown voltage (VGS= 0) Max. Unit - V VDS = 100 V 1 µA VDS = 100 V; TC=125 °C 10 µA 100 nA 4.5 V 5.1 7 mΩ Min. Typ. Max. Unit - 5117 - pF - 992 - pF - 39 - pF - 72 - nC - 31 - nC - 16 - nC Min. Typ. Max. Unit - 25 - ns - 36 - ns - 52 - ns - 21 - ns ID = 250 µA IDSS Zero gate voltage drain current (VGS = 0) IGSS Gate body leakage current (VDS = 0) VGS = 20 V Gate threshold voltage VDS= VGS, ID = 250 µA VGS(th) RDS(on) Static drain-source onresistance Min. Typ. 100 2.5 For TO-220FP: VGS= 10 V, ID= 22.5 A For TO-220: VGS= 10 V, ID= 55 A Table 5. Dynamic Symbol Parameter Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Qg Total gate charge Qgs Gate-source charge Qgd Gate-drain charge Test conditions VDS =50 V, f=1 MHz, VGS=0 VDD=50 V, ID = 110 A VGS =10 V Figure 17 Table 6. Switching times Symbol td(on) tr td(off) tf 4/16 Parameter Test conditions Turn-on delay time Rise time Turn-off delay time VDD=50 V, ID= 55 A, RG=4.7 Ω, VGS= 10 V Figure 16 Fall time DocID024058 Rev 2 STF110N10F7, STP110N10F7 Electrical characteristics Table 7. Source drain diode Symbol ISD ISDM(1) VSD(2) Parameter Test conditions Min Typ. Max. Unit Source-drain current: For TO-220FP - 45 A For TO-220 - 110 A Source-drain current (pulsed): For TO-220FP - 180 A For TO-220 - 415 A - 1.2 V For TO-220FP: ISD = 22.5 A, VGS=0 Forward on voltage For TO-220: ISD = 55 A, VGS=0 trr Reverse recovery time Qrr Reverse recovery charge IRRM Reverse recovery current ISD = 110 A, di/dt = 100 A/µs, VDD=80 V, Tj=150 °C - 77 ns - 150 nC - 4.3 A 1. Pulse width limited by safe operating area. 2. Pulsed: pulse duration=300 µs, duty cycle 1.5% DocID024058 Rev 2 5/16 Electrical characteristics 2.1 STF110N10F7, STP110N10F7 Electrical characteristics (curves) Figure 2. Safe operating area for TO-220FP AM15957v1 ID (A) Figure 3. Thermal impedance for TO-220FP Zth_TOFPDEF K δ=0.5 Tj=175°C Tc=25°C Single pulse 0.05 0.02 0.01 100 10 -2 s ai are n) his RDS(o t n n i max tio ra d by e Op ite Lim 10 100µs 1ms 1 10 -3 Single pulse 10ms 0.1 10 1 0.1 VDS(V) Figure 4. Safe operating area for TO-220 AM15958v1 ID (A) Tj=175°C Tc=25°C Single pulse 10 -4 10 -6 10 -5 10 -3 10 -4 10 -2 10 -1 tp(s) Figure 5. Thermal impedance for TO-220 Zth_280TOL K δ=0.5 100 s ai are n) his RDS(o t n n i max tio ra d by e Op ite Lim 10 100µs 0.05 0.02 0.01 10 -2 1ms 1 Single pulse 10ms 0.1 10 1 0.1 VDS(V) Figure 6. Output characteristics 10 -3 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 tp(s) Figure 7. Transfer characteristics AM15948v1 ID (A) AM15949v1 ID (A) VGS=8, 9, 10V 350 VDS=2V 300 300 250 7V 250 200 200 6V 150 150 100 100 5V 50 4V 0 0 6/16 1 2 3 4 5 6 7 8 VDS(V) 50 0 0 DocID024058 Rev 2 2 4 6 8 VGS(V) STF110N10F7, STP110N10F7 Electrical characteristics Figure 8. Gate charge vs gate-source voltage AM15950v1 VGS (V) VDD=50V ID=110A 12 Figure 9. Static drain-source on-resistance for TO-220FP AM15959v1 RDS(on) (mΩ) 5.25 10 5.20 8 5.15 6 5.10 4 5.05 2 5.00 VGS=10V 4.95 0 0 40 20 60 80 Qg(nC) Figure 10. Static drain-source on-resistance for TO-220 AM15960v1 RDS(on) (mΩ) 15 25 35 ID(A) Figure 11. Capacitance variations AM15952v1 C (pF) 6000 VGS=10V 5.3 5 Ciss 5000 5.2 4000 3000 5.1 2000 5.0 1000 0 0 4.9 0 20 40 60 80 100 ID(A) Figure 12. Normalized gate threshold voltage vs temperature AM015953v1 VGS(th) (norm) Figure 13. Normalized on-resistance vs temperature 2 1.1 1.8 1 1.6 0.9 1.4 0.8 1.2 0.7 1 0.6 0.8 0.5 0.6 25 50 75 100 125 150 AM15954v1 RDS(on) (norm) ID=250µA 1.2 0.4 -75 -50 -25 0 10 20 30 40 50 60 70 80 Coss Crss VDS(V) TJ(°C) 0.4 -75 -50 -25 0 DocID024058 Rev 2 ID=55A 25 50 75 100 125 150 TJ(°C) 7/16 Electrical characteristics STF110N10F7, STP110N10F7 Figure 14. Normalized BVDSS vs temperature AM15955v1 V(BR)DSS (norm) Figure 15. Source-drain diode forward vs temperature AM15956v1 VSD (V) ID=250µA TJ=-55°C 1.1 1.04 1 1.02 0.9 1.00 TJ=25°C 0.8 0.98 0.7 TJ=175°C 0.96 0.94 -75 -50 -25 0 8/16 0.6 25 50 75 100 125 150 TJ(°C) 0.5 0 DocID024058 Rev 2 20 40 60 80 100 ISD(A) STF110N10F7, STP110N10F7 3 Test circuits Test circuits Figure 16. Switching times test circuit for resistive load Figure 17. Gate charge test circuit VDD 12V 47kΩ 1kΩ 100nF 3.3 μF 2200 RL μF IG=CONST VDD VGS 100Ω Vi=20V=VGMAX VD RG 2200 μF D.U.T. D.U.T. VG 2.7kΩ PW 47kΩ 1kΩ PW AM01468v1 Figure 18. Test circuit for inductive load switching and diode recovery times A A AM01469v1 Figure 19. Unclamped inductive load test circuit L A D G D.U.T. FAST DIODE B B VD L=100μH S 3.3 μF B 25 Ω 1000 μF D VDD 2200 μF 3.3 μF VDD ID G RG S Vi D.U.T. Pw AM01470v1 AM01471v1 Figure 20. Unclamped inductive waveform Figure 21. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 0 DocID024058 Rev 2 10% AM01473v1 9/16 Package mechanical data 4 STF110N10F7, STP110N10F7 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 10/16 DocID024058 Rev 2 STF110N10F7, STP110N10F7 Package mechanical data Table 8. TO-220FP mechanical data mm Dim. Min. Typ. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 DocID024058 Rev 2 11/16 Package mechanical data STF110N10F7, STP110N10F7 Figure 22. TO-220FP drawing 7012510_Rev_K_B 12/16 DocID024058 Rev 2 STF110N10F7, STP110N10F7 Package mechanical data Table 9. TO-220 type A mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 ∅P 3.75 3.85 Q 2.65 2.95 DocID024058 Rev 2 13/16 Package mechanical data STF110N10F7, STP110N10F7 Figure 23. TO-220 type A drawing BW\SH$B5HYB7 14/16 DocID024058 Rev 2 STF110N10F7, STP110N10F7 5 Revision history Revision history Table 10. Document revision history Date Revision 03-Dec-2012 1 Initial release. 2 – Part numbers (STF45N10F7 and STH110N10F7-2) have been moved to two separate datasheets – Modified: title, IDM value for TO-220 – Added: EAS – Modified: the entire typical values in Table 5 and 6 – Modified: typical and max values in Table 7 – Modified: Figure 16, 17, 18, 19, Table 9 and Figure 23 – Minor text changes 16-Jul-2013 Changes DocID024058 Rev 2 15/16 STF110N10F7, STP110N10F7 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT AUTHORIZED FOR USE IN WEAPONS. NOR ARE ST PRODUCTS DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2013 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16 DocID024058 Rev 2