STB19NF20, STD19NF20
STF19NF20, STP19NF20
Datasheet
N-channel 200 V, 0.11 Ω, 15 A, MESH OVERLAY™ Power MOSFETs
in D2PAK, DPAK, TO‑220FP and TO-220 packages
TAB
Features
TAB
1
3
DPAK
D2 PAK
Type
2 3
1
STD19NF20
STF19NF20
1
2
3
RDS(on) max.
ID
1
2
3
TO-220
D(2, TAB)
200 V
STP19NF20
•
•
•
Package
D2PAK
STB19NF20
TAB
TO-220FP
VDS
0.16 Ω
15 A
DPAK
TO-220FP
TO-220
Extremely high dv/dt capability
Gate charge minimized
Very low intrinsic capacitance
Applications
•
G(1)
Switching applications
Description
S(3)
AM01475v1_noZen
These Power MOSFETs are designed using STMicroelectronics' consolidated striplayout-based MESH OVERLAY™ process. The result is a product that matches or
improves on the performance of comparable standard parts from other
manufacturers.
Product status links
STB19NF20
STD19NF20
STF19NF20
STP19NF20
DS4935 - Rev 7 - August 2018
For further information contact your local STMicroelectronics sales office.
www.st.com
STB19NF20,STD19NF20,STF19NF20,STP19NF20
Electrical ratings
1
Electrical ratings
Table 1. Absolute maximum ratings
Value
Symbol
Parameter
D²PAK, DPAK,
TO-220
TO-220FP
VDS
Drain-source voltage
200
VGS
Gate-source voltage
±20
ID
Unit
V
Drain current (continuous) at TC = 25 °C
15
15(1)
Drain current (continuous) at TC = 100 °C
9.45
9.45(1)
A
IDM(2)
Drain current (pulsed)
60
60(1)
A
PTOT
Total dissipation at Tcase = 25 °C
90
25
W
VISO
Insulation withstand voltage (RMS) from all three leads to
external heat sink (t = 1 s, TC = 25 °C)
2.5
kV
dv/dt(3)
Tstg
Tj
Peak diode recovery voltage slope
Storage temperature range
Operating junction temperature range
15
V/ns
-55 to 150
°C
1. This value is limited by package.
2. Pulse width is limited by safe operating area.
3. ISD ≤ 15 A, di/dt ≤ 300 A/μs, VDD = 80 % V(BR)DSS
Table 2. Thermal data
Symbol
Rthj-case
(1)
Value
Parameter
D²PAK
Thermal resistance junction-case
Rthj-pcb
Thermal resistance junction-pcb
Rthj-amb
Thermal resistance junction-ambient
DPAK
TO-220
TO-220FP
1.39
35
Unit
5
°C/W
50
62.5
1. When mounted on an 1-inch² FR-4, 2oz Cu board
Table 3. Avalanche characteristics
Symbol
DS4935 - Rev 7
Parameter
Value
Unit
IAR
Avalanche current, repetitive or not repetitive (pulse width limited by Tjmax)
15
A
EAS
Single-pulse avalanche energy (starting Tj = 25 °C, ID = IAR, VDD = 50 V)
110
mJ
page 2/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
Electrical characteristics
2
Electrical characteristics
(Tcase = 25 °C unless otherwise specified)
Table 4. Static
Symbol
V(BR)DSS
Parameter
Test conditions
Drain-source breakdown voltage
VGS = 0 V, ID = 1 mA
Min.
Typ.
Max.
200
Unit
V
VGS = 0 V, VDS = 200 V
1
IDSS
Zero gate voltage drain current
VGS = 0 V, VDS = 200 V,
TC = 125 °C(1)
10
IGSS
Gate-body leakage current
VDS = 0 V, VGS = ±20 V
±100
nA
VGS(th)
Gate threshold voltage
VDS = VGS, ID = 250 µA
3
4
V
RDS(on)
Static drain-source on-resistance
VGS = 10 V, ID = 7.5 A
0.11
0.16
Ω
Min.
Typ.
Max.
Unit
-
800
-
-
165
-
-
26
-
2
µA
1. Defined by design, not subject to production test.
Table 5. Dynamic
Symbol
Parameter
Test conditions
Ciss
Input capacitance
Coss
Output capacitance
Crss
Reverse transfer capacitance
Qg
Total gate charge
VDD = 160 V, ID = 15 A,
-
24
-
Qgs
Gate-source charge
VGS = 0 to 10 V
-
4.4
-
Gate-drain charge
(see Figure 16. Test circuit for gate
charge behavior)
-
11.6
-
Min.
Typ.
Max.
Qgd
VDS = 25 V, f = 1 MHz, VGS = 0 V
pF
nC
Table 6. Switching times
Symbol
td(on)
tr
td(off)
tf
Parameter
Test conditions
Unit
Turn-on delay time
VDD = 100 V, ID = 7.5 A,
-
11.5
-
Rise time
RG = 4.7 Ω, VGS = 10 V
-
22
-
Turn-off delay time
(see Figure 15. Test circuit for
resistive load switching times and
Figure 20. Switching time
waveform)
-
19
-
-
11
-
Min.
Typ.
Max.
Unit
Fall time
ns
Table 7. Source-drain diode
Symbol
ISD
DS4935 - Rev 7
Parameter
Test conditions
Source-drain current
-
15
A
ISDM(1)
Source-drain current (pulsed)
-
60
A
VSD(2)
Forward on voltage
-
1.6
V
ISD = 15 A, VGS = 0 V
page 3/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
Electrical characteristics
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
trr
Reverse recovery time
ISD = 15 A, di/dt = 100 A/µs,
-
125
ns
Qrr
Reverse recovery charge
VDD = 50 V
-
0.55
µC
Reverse recovery current
(see Figure 17. Test circuit for
inductive load switching and diode
recovery times)
-
8.8
A
trr
Reverse recovery time
ISD = 15 A, di/dt = 100 A/µs,
-
148
ns
Qrr
Reverse recovery charge
VDD = 50 V, Tj = 150 °C
-
0.73
µC
IRRM
Reverse recovery current
(see Figure 17. Test circuit for
inductive load switching and diode
recovery times)
-
9.9
A
IRRM
1. Pulse width is limited by safe operating area.
2. Pulse test: pulse duration = 300 µs, duty cycle 1.5%.
DS4935 - Rev 7
page 4/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
Electrical characteristics (curves)
2.1
Electrical characteristics (curves)
Figure 1. Safe operating area for D²PAK, DPAK and
TO-220
Figure 2. Thermal impedance for D²PAK, DPAK and
TO-220
Figure 3. Safe operating area for TO-220FP
Figure 4. Thermal impedance for TO-220FP
K
GC20940
10 -1
10 -2
10 -3
10 -4
Figure 5. Output characteristics
10 -3
10 -2
10 -1
10 0
t p (s)
Figure 6. Transfer characteristics
VGS = 8,9,10 V
7V
6V
5V
4V
DS4935 - Rev 7
page 5/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
Electrical characteristics (curves)
Figure 7. Static drain-source on-resistance
Figure 8. Normalized V(BR)DSS vs temperature
V(BR)DSS
(norm.)
Figure 9. Gate charge vs gate-source voltage
Figure 10. Capacitance variations
Figure 11. Normalized gate threshold voltage vs
temperature
Figure 12. Normalized on-resistance vs temperature
DS4935 - Rev 7
page 6/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
Electrical characteristics (curves)
Figure 13. Source-drain diode forward characteristics
DS4935 - Rev 7
Figure 14. Maximum avalanche energy vs temperature
page 7/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
Test circuits
3
Test circuits
Figure 15. Test circuit for resistive load switching times
Figure 16. Test circuit for gate charge behavior
VDD
12 V
2200
+ μF
3.3
μF
VDD
VD
VGS
1 kΩ
100 nF
RL
IG= CONST
VGS
RG
47 kΩ
+
pulse width
D.U.T.
2.7 kΩ
2200
μF
pulse width
D.U.T.
100 Ω
VG
47 kΩ
1 kΩ
AM01469v1
AM01468v1
Figure 17. Test circuit for inductive load switching and
diode recovery times
D
G
A
D.U.T.
S
25 Ω
A
L
A
B
B
3.3
µF
D
G
+
VD
100 µH
fast
diode
B
Figure 18. Unclamped inductive load test circuit
RG
1000
+ µF
2200
+ µF
VDD
3.3
µF
VDD
ID
D.U.T.
S
D.U.T.
Vi
_
pulse width
AM01471v1
AM01470v1
Figure 20. Switching time waveform
Figure 19. Unclamped inductive waveform
ton
V(BR)DSS
td(on)
VD
toff
td(off)
tr
tf
90%
90%
IDM
VDD
10%
0
ID
VDD
AM01472v1
VGS
0
VDS
10%
90%
10%
AM01473v1
DS4935 - Rev 7
page 8/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
Ordering information
4
Ordering information
Table 8. Order codes
Order code
Package
STB19NF20
D2PAK
STD19NF20
DPAK
STF19NF20
STP19NF20
DS4935 - Rev 7
Marking
19NF20
TO-220FP
TO-220
Packing
Tape and reel
Tube
page 9/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
Package information
5
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK®
packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions
and product status are available at: www.st.com. ECOPACK® is an ST trademark.
DS4935 - Rev 7
page 10/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
D²PAK (TO-263) type A package information
5.1
D²PAK (TO-263) type A package information
Figure 21. D²PAK (TO-263) type A package outline
0079457_25
DS4935 - Rev 7
page 11/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
D²PAK (TO-263) type A package information
Table 9. D²PAK (TO-263) type A package mechanical data
Dim.
mm
Min.
Max.
A
4.40
4.60
A1
0.03
0.23
b
0.70
0.93
b2
1.14
1.70
c
0.45
0.60
c2
1.23
1.36
D
8.95
9.35
D1
7.50
7.75
8.00
D2
1.10
1.30
1.50
E
10.00
E1
8.30
8.50
8.70
E2
6.85
7.05
7.25
e
10.40
2.54
e1
4.88
5.28
H
15.00
15.85
J1
2.49
2.69
L
2.29
2.79
L1
1.27
1.40
L2
1.30
1.75
R
V2
DS4935 - Rev 7
Typ.
0.40
0°
8°
page 12/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
D²PAK (TO-263) type B package information
5.2
D²PAK (TO-263) type B package information
Figure 22. D²PAK (TO-263) type B package outline
0079457_25_B
DS4935 - Rev 7
page 13/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
D²PAK (TO-263) type B package information
Table 10. D²PAK (TO-263) type B mechanical data
Dim.
mm
Min.
Max.
A
4.36
4.56
A1
0
0.25
b
0.70
0.90
b1
0.51
0.89
b2
1.17
1.37
b3
1.36
1.46
c
0.38
0.694
c1
0.38
0.534
c2
1.19
1.34
D
8.60
9.00
D1
6.90
7.50
E
10.15
10.55
E1
8.10
8.70
e
2.54 BSC
H
15.00
15.60
L
1.90
2.50
L1
1.65
L2
1.78
L3
L4
DS4935 - Rev 7
Typ.
0.25
4.78
5.28
page 14/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
D²PAK (TO-263) type B package information
Figure 23. D²PAK (TO-263) recommended footprint (dimensions are in mm)
Footprint
DS4935 - Rev 7
page 15/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
DPAK (TO-252) type A2 package information
5.3
DPAK (TO-252) type A2 package information
Figure 24. DPAK (TO-252) type A2 package outline
0068772_type-A2_rev25
DS4935 - Rev 7
page 16/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
DPAK (TO-252) type A2 package information
Table 11. DPAK (TO-252) type A2 mechanical data
Dim.
mm
Min.
Max.
A
2.20
2.40
A1
0.90
1.10
A2
0.03
0.23
b
0.64
0.90
b4
5.20
5.40
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
D1
4.95
E
6.40
E1
5.10
5.20
5.30
e
2.159
2.286
2.413
e1
4.445
4.572
4.699
H
9.35
10.10
L
1.00
1.50
L1
2.60
2.80
3.00
L2
0.65
0.80
0.95
L4
0.60
R
V2
DS4935 - Rev 7
Typ.
5.10
5.25
6.60
1.00
0.20
0°
8°
page 17/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
DPAK (TO-252) type C2 package information
5.4
DPAK (TO-252) type C2 package information
Figure 25. DPAK (TO-252) type C2 package outline
0068772_C2_25
DS4935 - Rev 7
page 18/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
DPAK (TO-252) type C2 package information
Table 12. DPAK (TO-252) type C2 mechanical data
Dim.
mm
Min.
Typ.
Max.
A
2.20
2.30
2.38
A1
0.90
1.01
1.10
A2
0.00
0.10
b
0.72
0.85
b4
5.13
c
0.47
0.60
c2
0.47
0.60
D
6.00
D1
5.10
E
6.50
E1
5.20
e
2.186
2.286
2.386
H
9.80
10.10
10.40
L
1.40
1.50
1.70
L1
L2
6.20
5.60
6.60
6.70
5.50
0.90
1.25
0.51 BSC
0.60
L6
DS4935 - Rev 7
6.10
5.46
2.90 REF
L3
L4
5.33
0.80
1.00
1.80 BSC
θ1
5°
7°
9°
θ2
5°
7°
9°
V2
0°
8°
page 19/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
DPAK (TO-252) type C2 package information
Figure 26. DPAK (TO-252) recommended footprint (dimensions are in mm)
FP_0068772_25
DS4935 - Rev 7
page 20/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
D²PAK and DPAK packing information
5.5
D²PAK and DPAK packing information
Figure 27. Tape outline
DS4935 - Rev 7
page 21/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
D²PAK and DPAK packing information
Figure 28. Reel outline
T
40mm min.
access hole
at slot location
B
D
C
N
A
G measured
at hub
Tape slot
in core for
tape start
2.5mm min.width
Full radius
AM06038v1
Table 13. D²PAK tape and reel mechanical data
Tape
Dim.
DS4935 - Rev 7
Reel
mm
mm
Dim.
Min.
Max.
Min.
A0
10.5
10.7
A
B0
15.7
15.9
B
1.5
D
1.5
1.6
C
12.8
D1
1.59
1.61
D
20.2
E
1.65
1.85
G
24.4
F
11.4
11.6
N
100
K0
4.8
5.0
T
Max.
330
13.2
26.4
30.4
P0
3.9
4.1
P1
11.9
12.1
Base quantity
1000
P2
1.9
2.1
Bulk quantity
1000
R
50
T
0.25
0.35
W
23.7
24.3
page 22/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
D²PAK and DPAK packing information
Table 14. DPAK tape and reel mechanical data
Tape
Dim.
mm
mm
Dim.
Min.
Max.
A0
6.8
7
A
B0
10.4
10.6
B
1.5
12.1
C
12.8
1.6
D
20.2
G
16.4
50
B1
DS4935 - Rev 7
Reel
Min.
Max.
330
13.2
D
1.5
D1
1.5
E
1.65
1.85
N
F
7.4
7.6
T
K0
2.55
2.75
P0
3.9
4.1
Base qty.
2500
P1
7.9
8.1
Bulk qty.
2500
P2
1.9
2.1
R
40
T
0.25
0.35
W
15.7
16.3
18.4
22.4
page 23/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
TO-220FP package information
5.6
TO-220FP package information
Figure 29. TO-220FP package outline
7012510_Rev_12_B
DS4935 - Rev 7
page 24/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
TO-220FP package information
Table 15. TO-220FP package mechanical data
Dim.
mm
Min.
Max.
A
4.4
4.6
B
2.5
2.7
D
2.5
2.75
E
0.45
0.7
F
0.75
1
F1
1.15
1.70
F2
1.15
1.70
G
4.95
5.2
G1
2.4
2.7
H
10
10.4
L2
DS4935 - Rev 7
Typ.
16
L3
28.6
30.6
L4
9.8
10.6
L5
2.9
3.6
L6
15.9
16.4
L7
9
9.3
Dia
3
3.2
page 25/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
TO-220 type A package information
5.7
TO-220 type A package information
Figure 30. TO-220 type A package outline
0015988_typeA_Rev_21
DS4935 - Rev 7
page 26/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
TO-220 type A package information
Table 16. TO-220 type A package mechanical data
Dim.
mm
Min.
Max.
A
4.40
4.60
b
0.61
0.88
b1
1.14
1.55
c
0.48
0.70
D
15.25
15.75
D1
DS4935 - Rev 7
Typ.
1.27
E
10.00
10.40
e
2.40
2.70
e1
4.95
5.15
F
1.23
1.32
H1
6.20
6.60
J1
2.40
2.72
L
13.00
14.00
L1
3.50
3.93
L20
16.40
L30
28.90
øP
3.75
3.85
Q
2.65
2.95
page 27/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
Revision history
Table 17. Document revision history
Date
Version
Changes
13-Oct-2006
1
First release.
17-Nov-2006
2
Part number has been modified.
02-Feb-2007
3
Preliminary version.
16-Feb-2007
4
TO-220FP package has been added.
15-Oct-2012
5
Updated Section 4: Package information and Section 4: Package information.
Minor text changes.
Throughout document:
– added DPAK package information
– text and formatting updates
16-Apr-2015
6
Updated Figure 1: Internal schematic diagram
Updated Table 2: Absolute maximum ratings
Updated Table 3: Thermal data
Updated and renamed Table 5: Static (was On/off states)
Removed maturity status indication from cover page. The document status is
production data.
09-Aug-2018
7
Updated Table 5. Dynamic.
Updated Section 5 Package information.
Minor text changes
DS4935 - Rev 7
page 28/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
Contents
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2
Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5
Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
5.1
D²PAK (TO-263) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.2
D²PAK (TO-263) type B package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.3
DPAK (TO-252) type A2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.4
DPAK (TO-252) type C2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.5
D²PAK and DPAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.6
TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5.7
TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
DS4935 - Rev 7
page 29/30
STB19NF20,STD19NF20,STF19NF20,STP19NF20
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2018 STMicroelectronics – All rights reserved
DS4935 - Rev 7
page 30/30