STD3N62K3, STF3N62K3, STU3N62K3
Datasheet
N-channel 620 V, 2.2 Ω typ., 2.7 A MDmesh™ K3 Power MOSFETs in
DPAK, TO-220FP and IPAK packages
Features
Order code
VDS
RDS(on)max.
STD3N62K3
STF3N62K3
620 V
2.5 Ω
STU3N62K3
D(2, TAB)
•
•
•
•
•
G(1)
S(3)
AM01475V1
ID
Package
2.7 A
DPAK
2.7 A
TO-220FP
2.7 A
IPAK
100% avalanche tested
Extremely high dv/dt capability
Very low intrinsic capacitance
Improved diode reverse recovery characteristics
Zener-protected
Applications
•
Switching applications
Description
Product status link
These MDmesh™ K3 Power MOSFETs are the result of improvements applied to
STMicroelectronics’ MDmesh™ technology, combined with a new optimized vertical
structure. These devices boast an extremely low on-resistance, superior dynamic
performance and high avalanche capability, rendering them suitable for the most
demanding applications.
STD3N62K3
STF3N62K3
STU3N62K3
DS5888 - Rev 3 - July 2018
For further information contact your local STMicroelectronics sales office.
www.st.com
STD3N62K3, STF3N62K3, STU3N62K3
Electrical ratings
1
Electrical ratings
Table 1. Absolute maximum ratings
Symbol
Value
Parameter
DPAK
TO-220FP
IPAK
Unit
VDS
Drain-source voltage
620
V
VGS
Gate-source voltage
±30
V
ID
Drain current (continuous) at TC = 25 °C
ID
Drain current (continuous) at TC = 100 °C
IDM
(2)
Drain current (pulsed)
2.7 (1)
2.7
A
1.7
(1)
1.7
A
10.8
A
45
W
10.8
PTOT
Total dissipation at TC = 25 °C
ESD
Gate-source human body model
(C = 100 pF, R = 1.5 kΩ)
dv/dt (3)
2.7
45
Peak diode recovery voltage slope
Insulation withstand voltage (RMS) from all three
leads to external heat sink
VISO
1.7
10.8
(1)
20
2.5
kV
9
V/ns
2500
V
-55 to 150
°C
(t = 1 s; TC = 25 °C)
Tj
Operating junction temperature range
Tstg
Storage temperature range
1. Limited by maximum junction temperature.
2. Pulse width limited by safe operating area.
3. ISD ≤ 2.7 A, di/dt ≤ 200 A/μs, VDSpeak ≤ V(BR)DSS, VDD = 80% V(BR)DSS.
Table 2. Thermal data
Symbol
Parameter
Rthj-case
Thermal resistance junction-case
Rthj-amb
Thermal resistance junction-ambient
Rthj-pcb
(1)
Thermal resistance junction-pcb
Value
Unit
DPAK
TO-220FP
IPAK
2.78
6.25
2.78
°C/W
62.5
100
°C/W
50
°C/W
1. When mounted on 1inch² FR-4 board, 2 oz Cu.
Table 3. Avalanche characteristics
Symbol
Parameter
Value
Unit
IAR(1)
Avalanche current, repetitive or not-repetitive
2.7
A
EAS(2)
Single pulse avalanche energy
100
mJ
1. Pulse width limited by Tj max.
2. Starting Tj = 25 °C, ID = IAR, VDD = 50 V.
DS5888 - Rev 3
page 2/27
STD3N62K3, STF3N62K3, STU3N62K3
Electrical characteristics
2
Electrical characteristics
(TCASE = 25 °C unless otherwise specified)
Table 4. On/off states
Symbol
V(BR)DSS
Parameter
Drain-source
breakdown voltage
Test conditions
Min.
ID = 1 mA, VGS = 0 V
Typ.
620
Zero gate voltage drain
current
IGSS
Gate body leakage
current
VDS = 0 V, VGS = ±20 V
VGS(th)
Gate threshold voltage
VDS = VGS, ID = 50 µA
RDS(on)
Static drain-source on
resistance
VGS = 10 V, ID = 1.4 A
VGS = 0 V, VDS = 620 V, TC = 125 °C
1
µA
50
µA
±10
µA
3.75
4.5
V
2.2
2.5
Ω
Typ.
Max.
Unit
-
pF
(1)
3
Unit
V
VGS = 0 V, VDS = 620 V
IDSS
Max.
1. Defined by design, not subject to production test.
Table 5. Dynamic
Symbol
Parameter
Test conditions
Min.
Ciss
Input capacitance
Coss
Output capacitance
Crss
Reverse transfer
capacitance
Coss eq. (1)
Equivalent output
capacitance
VDS = 0 to 496 V, VGS = 0 V
-
32.3
-
pF
RG
Intrinsic gate resistance
f = 1 MHz open drain
-
10
-
Ω
Qg
Total gate charge
Qgs
Gate-source charge
-
nC
Qgd
Gate-drain charge
385
VDS = 25 V, f = 1 MHz, VGS = 0 V
-
55
6
VDD = 496 V, ID = 3.4 A, VGS = 0 to 10 V
(see Figure 16. Test circuit for gate charge
behavior)
13
-
2.5
7.5
1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0
to 80% VDSS.
Table 6. Switching times
Symbol
td(on)
tr
td(off)
tf
DS5888 - Rev 3
Parameter
Test conditions
Turn-on delay time
VDD = 310 V, ID = 1.7 A,
Rise time
RG = 4.7 Ω, VGS = 10 V
Turn-off delay time
(see Figure 15. Test circuit for resistive load
switching times and Figure 20. Switching
time waveform)
Fall time
Min.
Typ.
Max.
Unit
-
ns
9
-
6.8
22
15.6
page 3/27
STD3N62K3, STF3N62K3, STU3N62K3
Electrical characteristics
Table 7. Source drain diode
Symbol
Parameter
Test conditions
ISD
Source-drain current
ISDM (1)
Source-drain current
(pulsed)
VSD (2)
Forward on voltage
ISD = 2.7 A, VGS = 0 V
trr
Reverse recovery time
ISD = 2.7 A, di/dt = 100 A/µs
Qrr
Reverse recovery charge
IRRM
Reverse recovery current
VDD = 60 V (see Figure 17. Test circuit for
inductive load switching and diode recovery
times)
trr
Reverse recovery time
ISD = 2.7 A, di/dt = 100 A/µs
Qrr
Reverse recovery charge
IRRM
Reverse recovery current
VDD = 60 V, Tj = 150 °C (see Figure
17. Test circuit for inductive load switching
and diode recovery times)
Min.
Typ.
Max.
Unit
2.7
-
10.8
-
-
-
1.6
A
V
190
ns
825
nC
9
A
255
ns
1100
nC
10
A
1. Pulse width limited by safe operating area.
2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%.
Table 8. Gate-source Zener diode
Symbol
V(BR)GSO
Parameter
Gate-source breakdown
voltage
Test conditions
IGS = ±1 mA, ID = 0 A
Min.
Typ.
Max.
Unit
30
-
-
V
The built-in back-to-back Zener diodes are specifically designed to enhance the ESD performance of the device.
The Zener voltage facilitates efficient and cost-effective device integrity protection, thus eliminating the need for
additional external componentry.
DS5888 - Rev 3
page 4/27
STD3N62K3, STF3N62K3, STU3N62K3
Electrical characteristics curves
2.1
Electrical characteristics curves
Figure 1. Safe operating area for DPAK/IPAK
Figure 2. Thermal impedance for DPAK/IPAK
Figure 3. Safe operating area for TO-220FP
Figure 4. Thermal impedance for TO-220FP
K
GC20940_ZTH
δ=0.5
0.1
δ=0.2
0.05
0.02
10 -1
0.01
Single pulse
10 -2
10
Figure 5. Output characterisics
DS5888 - Rev 3
-3
10-4
10-3
10
-2
10
-1
10
0
tp(s)
Figure 6. Transfer characteristics
page 5/27
STD3N62K3, STF3N62K3, STU3N62K3
Electrical characteristics curves
Figure 7. Normalized V(BR)DSS vs temperature
Figure 8. Static drain-source on-resistance
Figure 9. Gate charge vs gate-source voltage
Figure 10. Capacitance variations
Figure 11. Normalized gate threshold voltage vs
temperature
Figure 12. Normalized on-resistance vs temperature
DS5888 - Rev 3
page 6/27
STD3N62K3, STF3N62K3, STU3N62K3
Electrical characteristics curves
Figure 13. Source-drain diode forward characteristics
DS5888 - Rev 3
Figure 14. Maximum avalanche energy vs temperature
page 7/27
STD3N62K3, STF3N62K3, STU3N62K3
Test circuits
3
Test circuits
Figure 15. Test circuit for resistive load switching times
Figure 16. Test circuit for gate charge behavior
VDD
12 V
2200
+ μF
3.3
μF
VDD
VD
VGS
1 kΩ
100 nF
RL
IG= CONST
VGS
RG
47 kΩ
+
pulse width
D.U.T.
2.7 kΩ
2200
μF
pulse width
D.U.T.
100 Ω
VG
47 kΩ
1 kΩ
AM01469v1
AM01468v1
Figure 17. Test circuit for inductive load switching and
diode recovery times
D
G
A
D.U.T.
S
25 Ω
A
L
A
B
B
3.3
µF
D
G
+
VD
100 µH
fast
diode
B
Figure 18. Unclamped inductive load test circuit
RG
1000
+ µF
2200
+ µF
VDD
3.3
µF
VDD
ID
D.U.T.
S
D.U.T.
Vi
_
pulse width
AM01471v1
AM01470v1
Figure 20. Switching time waveform
Figure 19. Unclamped inductive waveform
ton
V(BR)DSS
td(on)
VD
toff
td(off)
tr
tf
90%
90%
IDM
VDD
10%
0
ID
VDD
AM01472v1
VGS
0
VDS
10%
90%
10%
AM01473v1
DS5888 - Rev 3
page 8/27
STD3N62K3, STF3N62K3, STU3N62K3
Package information
4
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK®
packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions
and product status are available at: www.st.com. ECOPACK® is an ST trademark.
DS5888 - Rev 3
page 9/27
STD3N62K3, STF3N62K3, STU3N62K3
DPAK (TO-252) type A package information
4.1
DPAK (TO-252) type A package information
Figure 21. DPAK (TO-252) type A package outline
0068772_A_25
DS5888 - Rev 3
page 10/27
STD3N62K3, STF3N62K3, STU3N62K3
DPAK (TO-252) type A package information
Table 9. DPAK (TO-252) type A mechanical data
Dim.
mm
Min.
Max.
A
2.20
2.40
A1
0.90
1.10
A2
0.03
0.23
b
0.64
0.90
b4
5.20
5.40
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
D1
4.95
E
6.40
E1
4.60
4.70
4.80
e
2.159
2.286
2.413
e1
4.445
4.572
4.699
H
9.35
10.10
L
1.00
1.50
(L1)
2.60
2.80
3.00
L2
0.65
0.80
0.95
L4
0.60
R
V2
DS5888 - Rev 3
Typ.
5.10
5.25
6.60
1.00
0.20
0°
8°
page 11/27
STD3N62K3, STF3N62K3, STU3N62K3
DPAK (TO-252) type C package information
4.2
DPAK (TO-252) type C package information
Figure 22. DPAK (TO-252) type C package outline
0068772_C_25
DS5888 - Rev 3
page 12/27
STD3N62K3, STF3N62K3, STU3N62K3
DPAK (TO-252) type C package information
Table 10. DPAK (TO-252) type C mechanical data
Dim.
mm
Min.
Typ.
Max.
A
2.20
2.30
2.38
A1
0.90
1.01
1.10
A2
0.00
0.10
b
0.72
0.85
b4
5.13
c
0.47
0.60
c2
0.47
0.60
D
6.00
D1
5.25
E
6.50
E1
4.70
e
5.46
6.10
6.20
6.60
6.70
2.186
2.286
2.386
H
9.80
10.10
10.40
L
1.40
1.50
1.70
L1
L2
2.90 REF
0.90
L3
L4
1.25
0.51 BSC
0.60
L6
DS5888 - Rev 3
5.33
0.80
1.00
1.80 BSC
θ1
5°
7°
9°
θ2
5°
7°
9°
V2
0°
8°
page 13/27
STD3N62K3, STF3N62K3, STU3N62K3
DPAK (TO-252) type E package information
4.3
DPAK (TO-252) type E package information
Figure 23. DPAK (TO-252) type E package outline
0068772_type-E_rev.25
DS5888 - Rev 3
page 14/27
STD3N62K3, STF3N62K3, STU3N62K3
DPAK (TO-252) type E package information
Table 11. DPAK (TO-252) type E mechanical data
Dim.
A
mm
Min.
Typ.
Max.
2.18
2.39
A2
0.13
b
0.65
0.884
b4
4.95
5.46
c
0.46
0.61
c2
0.46
0.60
D
5.97
6.22
D1
5.21
E
6.35
E1
4.32
6.73
e
2.286
e1
4.572
H
9.94
10.34
L
1.50
1.78
L1
L2
2.74
0.89
L4
1.27
1.02
Figure 24. DPAK (TO-252) recommended footprint (dimensions are in mm)
FP_0068772_25
DS5888 - Rev 3
page 15/27
STD3N62K3, STF3N62K3, STU3N62K3
DPAK (TO-252) packing information
4.4
DPAK (TO-252) packing information
Figure 25. DPAK (TO-252) tape outline
10 pitches cumulative
tolerance on tape +/- 0.2 mm
T
P0
Top cover
tape
P2
D
E
F
B1
K0
For machine ref. only
including draft and
radii concentric around B0
W
B0
A0
P1
D1
User direction of feed
R
Bending radius
User direction of feed
AM08852v1
DS5888 - Rev 3
page 16/27
STD3N62K3, STF3N62K3, STU3N62K3
DPAK (TO-252) packing information
Figure 26. DPAK (TO-252) reel outline
T
40mm min.
access hole
at slot location
B
D
C
N
A
G measured
at hub
Tape slot
in core for
tape start
2.5mm min.width
Full radius
AM06038v1
Table 12. DPAK (TO-252) tape and reel mechanical data
Tape
Dim.
mm
mm
Dim.
Min.
Max.
A0
6.8
7
A
B0
10.4
10.6
B
1.5
12.1
C
12.8
1.6
D
20.2
G
16.4
50
B1
DS5888 - Rev 3
Reel
Min.
Max.
330
13.2
D
1.5
D1
1.5
E
1.65
1.85
N
F
7.4
7.6
T
K0
2.55
2.75
P0
3.9
4.1
Base qty.
2500
P1
7.9
8.1
Bulk qty.
2500
P2
1.9
2.1
R
40
T
0.25
0.35
W
15.7
16.3
18.4
22.4
page 17/27
STD3N62K3, STF3N62K3, STU3N62K3
TO-220FP package information
4.5
TO-220FP package information
Figure 27. TO-220FP package outline
7012510_Rev_12_B
DS5888 - Rev 3
page 18/27
STD3N62K3, STF3N62K3, STU3N62K3
TO-220FP package information
Table 13. TO-220FP package mechanical data
Dim.
mm
Min.
Max.
A
4.4
4.6
B
2.5
2.7
D
2.5
2.75
E
0.45
0.7
F
0.75
1
F1
1.15
1.70
F2
1.15
1.70
G
4.95
5.2
G1
2.4
2.7
H
10
10.4
L2
DS5888 - Rev 3
Typ.
16
L3
28.6
30.6
L4
9.8
10.6
L5
2.9
3.6
L6
15.9
16.4
L7
9
9.3
Dia
3
3.2
page 19/27
STD3N62K3, STF3N62K3, STU3N62K3
IPAK (TO-251) type A package information
4.6
IPAK (TO-251) type A package information
Figure 28. IPAK (TO-251) type A package outline
0068771_IK_typeA_rev14
DS5888 - Rev 3
page 20/27
STD3N62K3, STF3N62K3, STU3N62K3
IPAK (TO-251) type A package information
Table 14. IPAK (TO-251) type A package mechanical data
Dim.
mm
Min.
Typ.
A
2.20
2.40
A1
0.90
1.10
b
0.64
0.90
b2
b4
0.95
5.20
B5
5.40
0.30
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
E
6.40
6.60
e
e1
2.28
4.40
H
DS5888 - Rev 3
Max.
4.60
16.10
L
9.00
9.40
L1
0.80
1.20
L2
0.80
V1
10°
1.00
page 21/27
STD3N62K3, STF3N62K3, STU3N62K3
IPAK (TO-251) type C package information
4.7
IPAK (TO-251) type C package information
Figure 29. IPAK (TO-251) type C package outline
0068771_IK_typeC_rev14
DS5888 - Rev 3
page 22/27
STD3N62K3, STF3N62K3, STU3N62K3
IPAK (TO-251) type C package information
Table 15. IPAK (TO-251) type C package mechanical data
Dim.
mm
Min.
Typ.
Max.
A
2.20
2.30
2.35
A1
0.90
1.00
1.10
b
0.66
0.79
b2
DS5888 - Rev 3
0.90
b4
5.23
5.33
5.43
c
0.46
0.59
c2
0.46
0.59
D
6.00
6.10
6.20
D1
5.20
5.37
5.55
E
6.50
6.60
6.70
E1
4.60
4.78
4.95
e
2.20
2.25
2.30
e1
4.40
4.50
4.60
H
16.18
16.48
16.78
L
9.00
9.30
9.60
L1
0.80
1.00
1.20
L2
0.90
1.08
1.25
θ1
3°
5°
7°
θ2
1°
3°
5°
page 23/27
STD3N62K3, STF3N62K3, STU3N62K3
Ordering information
5
Ordering information
Table 16. Order codes
Order code
Marking
STD3N62K3
STF3N62K3
STU3N62K3
DS5888 - Rev 3
3N62K3
Package
Packing
DPAK
Tape and reel
TO-220FP
Tube
IPAK
Tube
page 24/27
STD3N62K3, STF3N62K3, STU3N62K3
Revision history
Table 17. Document revision history
Date
Version
Changes
10-Jul-2008
1
First release
17-Aug-2009
2
Modified: marking of the Table 1
The part numbers STB3N62K3 and STP3N62K3 have been moved to a
separate datasheet.
Removed maturity status indication from cover page. The document status is
production data.
02-Jul-2018
3
Updated title and features in cover page.
Updated Section 1 Electrical ratings, Section 2 Electrical characteristics and
Section 4 Package information.
Added Section 5 Ordering information.
Minor text changes.
DS5888 - Rev 3
page 25/27
STD3N62K3, STF3N62K3, STU3N62K3
Contents
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2
Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1
Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4
Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5
4.1
DPAK (TO-252) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2
DPAK (TO-252) type C package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.3
DPAK (TO-252) type E package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.4
DPAK (TO-252) packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.5
TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.6
IPAK (TO-251) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.7
IPAK (TO-251) type C package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
DS5888 - Rev 3
page 26/27
STD3N62K3, STF3N62K3, STU3N62K3
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2018 STMicroelectronics – All rights reserved
DS5888 - Rev 3
page 27/27