STD3NK80Z-1, STD3NK80ZT4,
STF3NK80Z, STP3NK80Z
N-channel 800 V, 3.8 Ω typ., 2.5 A SuperMESH™
Power MOSFETs in IPAK, DPAK, TO-220FP, TO-220 packages
Datasheet - production data
Features
Order code
VDS
RDS(on) max.
ID
STD3NK80Z-1
800 V
4.5 Ω
2.5 A
STD3NK80ZT4
800 V
4.5 Ω
2.5 A
STF3NK80Z
800 V
4.5 Ω
2.5 A
STP3NK80Z
800 V
4.5 Ω
2.5 A
Extremely high dv/dt capability
100% avalanche tested
Gate charge minimized
Zener-protected
Applications
Figure 1: Internal schematic diagram
Switching applications
Description
These high voltage devices are Zener-protected
N-channel Power MOSFETs developed using the
SuperMESH™ technology by
STMicroelectronics, an optimization of the
well-established PowerMESH™. In addition to a
significant reduction in on-resistance, these
devices are designed to ensure a high level of
dv/dt capability for the most demanding
applications. Such series complements ST's full
range of high voltage MOSFETs including the
revolutionary MDmesh™ products.
Table 1: Device summary
Order code
Marking
Package
Packaging
STD3NK80Z-1
D3NK80Z
IPAK
Tube
STD3NK80ZT4
D3NK80Z
DPAK
Tape and reel
STF3NK80Z
F3NK80Z
TO-220FP
Tube
STP3NK80Z
P3NK80Z
TO-220
Tube
April 2017
DocID9565 Rev 7
This is information on a product in full production.
1/29
www.st.com
Contents
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Contents
1
Electrical ratings ............................................................................. 3
2
Electrical characteristics ................................................................ 4
2.1
Electrical characteristics (curves) ...................................................... 6
3
Test circuits ..................................................................................... 9
4
Package information ..................................................................... 10
5
2/29
4.1
IPAK (TO-251) type A package information .................................... 10
4.2
DPAK package information ............................................................. 12
4.2.1
DPAK (TO-252) type A package information ................................... 12
4.2.2
DPAK (TO-252) type C2 package information ................................. 15
4.2.3
DPAK (TO-252) type E package information ................................... 18
4.2.4
DPAK (TO-252) packing information ................................................ 20
4.3
TO-220FP package information ...................................................... 22
4.4
TO-220 package information ........................................................... 24
4.4.1
TO-220 type A package information ................................................. 24
4.4.2
TO-220 type H package information ................................................ 26
Revision history ............................................................................ 28
DocID9565 Rev 7
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
1
Electrical ratings
Electrical ratings
Table 2: Absolute maximum ratings
Value
Symbol
TO-220,
DPAK,
IPAK
Parameter
Unit
TO-220FP
VDS
Drain-source voltage
800
VGS
Gate-source voltage
±30
Drain current (continuous) at TC = 100 °C
V
2.5
2.5(1)
A
1.57
1.57(1)
A
A
W
Drain current (continuous) at TC = 25 °C
ID
V
IDM(2)
Drain current (pulsed)
10
10(1)
PTOT
Total dissipation at TC = 25 °C
70
25
ESD
Gate-source, human body model,
R = 1.5 kΩ, C = 100 pF
2
kV
dv/dt(3)
Peak diode recovery voltage slope
4.5
V/ns
VISO
Insulation withstand voltage (RMS) from all three
leads to external heat sink (t = 1 s, TC = 25 °C)
Tstg
Storage temperature range
Tj
2.5
-55 to 150
Operation junction temperature range
kV
°C
Notes:
(1)This
value is limited by package.
(2)Pulse
(3)I
SD
width is limited by safe operating area.
≤ 2.5 A, di/dt ≤ 200 A/μs, VDS(peak) < V(BR)DSS, VDD = 640 V
Table 3: Thermal data
Value
Symbol
Parameter
Rthj-case
Thermal resistance junction-case
Rthj-amb
Thermal resistance junction-ambient
Rthj-pcb
(1)
TO-220
TO-220FP
1.78
5
DPAK
1.78
62.5
Thermal resistance junction-pcb
IPAK
Unit
°C/W
100
50
°C/W
°C/W
Notes:
(1)When
mounted on FR-4 board of 1 inch², 2 oz Cu.
Table 4: Avalanche characteristics
Symbol
Parameter
Value
Unit
IAR
Avalanche current, repetitive or non-repetitive
(pulse width limited by TJ max)
2.5
A
EAS
Single pulse avalanche energy (starting TJ =25 °C, ID = IAR, VDD= 50 V)
170
mJ
DocID9565 Rev 7
3/29
Electrical characteristics
2
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Electrical characteristics
(TC = 25 °C unless otherwise specified)
Table 5: On /off states
Symbol
V(BR)DSS
Parameter
Test conditions
Drain-source breakdown
voltage
VGS = 0 V, ID = 1 mA
Min.
Typ.
Max.
800
Unit
V
VGS = 0 V, VDS = 800 V
1
µA
VGS = 0 V, VDS = 800 V,
TC = 125 °C(1)
50
µA
±10
µA
3.75
4.5
V
3.8
4.5
Ω
Min.
Typ.
Max.
Unit
-
485
-
pF
-
57
-
pF
-
11
-
pF
IDSS
Zero gate voltage drain
current
IGSS
Gate-body leakage current
VDS = 0 V, VGS = ±20 V
VGS(th)
Gate threshold voltage
VDS = VGS, ID = 50 µA
RDS(on)
Static drain-source
on- resistance
VGS = 10 V, ID = 1.25 A
3
Notes:
(1)Defined
by design, not subject to production test.
Table 6: Dynamic
Symbol
Ciss
Parameter
Test conditions
Input capacitance
VGS = 0 V, VDS = 25 V,
f = 1 MHz
Coss
Output capacitance
Crss
Reverse transfer capacitance
Coss eq(1)
Equivalent output capacitance
VGS = 0 V, VDS = 0 to 640 V
-
22
-
pF
Qg
Total gate charge
-
19
-
nC
Qgs
Gate-source charge
-
3.2
-
nC
Qgd
Gate-drain charge
VDD = 640 V, ID = 2.5 A,
VGS = 0 to 10 V
(see Figure 17: "Test circuit
for gate charge behavior")
-
10.8
-
nC
Notes:
(1)C
oss eq
is defined as a constant equivalent capacitance giving the same charging time as C oss when VDS
increases from 0 to 80%
Table 7: Switching times
Symbol
td(on)
tr
td(off)
tf
4/29
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Test conditions
VDD = 400 V, ID = 1.25 A, RG = 4.7
Ω, VGS =10 V
(see Figure 16: "Test circuit for
resistive load switching times" and
Figure 21: "Switching time
waveform")
DocID9565 Rev 7
Min.
Typ.
Max.
Unit
-
17
-
ns
-
27
-
ns
-
36
-
ns
-
40
-
ns
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Electrical characteristics
Table 8: Source drain diode
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
ISD
Source-drain current
-
2.5
A
ISDM(1)
Source-drain current
(pulsed)
-
10
A
VSD(2)
Forward on voltage
ISD = 2.5 A, VGS = 0 V
-
1.6
V
trr
Reverse recovery time
-
384
ns
Qrr
Reverse recovery charge
-
1.6
μC
IRRM
Reverse recovery current
ISD = 2.5 A, di/dt = 100 A/µs
VDD = 50 V
(see Figure 18: "Test circuit
for inductive load switching
and diode recovery times")
-
8.4
A
ISD = 2.5 A, di/dt = 100 A/µs,
VDD = 50 V , TJ = 150 °C
(see Figure 18: "Test circuit
for inductive load switching
and diode recovery times")
-
474
ns
-
2.1
μC
-
8.8
A
Min.
Typ.
Max.
Unit
30
-
-
V
trr
Reverse recovery time
Qrr
Reverse recovery charge
IRRM
Reverse recovery current
Notes:
(1)Pulsed:
(2)Pulse
pulse duration = 300 μs, duty cycle 1.5%.
width is limited by safe operating area.
Table 9: Gate-source Zener diode
Symbol
V(BR)GSO
Parameter
Test conditions
Gate-source breakdown
voltage
IGS = ±1 mA (open drain)
The built-in back-to-back Zener diodes are specifically designed to enhance the ESD
performance of the device. The Zener voltage facilitates efficient and cost-effective device
integrity protection, thus eliminating the need for additional external componentry.
DocID9565 Rev 7
5/29
Electrical characteristics
2.1
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Electrical characteristics (curves)
Figure 2: Safe operating area for
TO-220, DPAK, IPAK
Figure 3: Thermal impedance for
TO-220, DPAK, IPAK
CG20930
K
δ = 0.5
δ = 0.2
δ = 0.1
10-1
Z
Zthth == kk R
Rthj-C
thj-C
δδ == ttp // Ƭ
Ƭ
p
δ = 0.05
δ = 0.02
δ = 0.01
tp
SINGLE PULSE
10-2
10-5
6/29
10-4
10-3
10-2
ƬƬ
10-1
tp(s)
Figure 4: Safe operating area for TO-220FP
Figure 5: Thermal impedance for TO-220FP
Figure 6: Output characteristics
Figure 7: Transfer characteristics
DocID9565 Rev 7
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Electrical characteristics
Figure 8: Static drain-source on-resistance
Figure 9: Gate charge vs. gate-source voltage
Figure 10: Capacitance variations
Figure 11: Normalized gate threshold voltage
vs. temperature
Figure 12: Normalized on-resistance vs.
temperature
Figure 13: Source-drain diode forward
characteristics
DocID9565 Rev 7
7/29
Electrical characteristics
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Figure 14: Normalized V(BR)DSS vs. temperature
8/29
Figure 15: Maximum avalanche energy vs.
temperature
DocID9565 Rev 7
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
3
Test circuits
Test circuits
Figure 16: Test circuit for resistive load
switching times
Figure 17: Test circuit for gate charge
behavior
Figure 18: Test circuit for inductive load
switching and diode recovery times
Figure 19: Unclamped inductive load test
circuit
Figure 20: Unclamped inductive waveform
Figure 21: Switching time waveform
DocID9565 Rev 7
9/29
Package information
4
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK ®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
4.1
IPAK (TO-251) type A package information
Figure 22: IPAK (TO-251) type A package outline
10/29
DocID9565 Rev 7
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Package information
Table 10: IPAK (TO-251) type A package mechanical data
mm
Dim.
Min.
Typ.
Max.
A
2.20
2.40
A1
0.90
1.10
b
0.64
0.90
b2
b4
0.95
5.20
B5
5.40
0.30
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
E
6.40
6.60
e
e1
2.28
4.40
H
4.60
16.10
L
9.00
9.40
L1
0.80
1.20
L2
0.80
V1
10°
DocID9565 Rev 7
1.00
11/29
Package information
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
4.2
DPAK package information
4.2.1
DPAK (TO-252) type A package information
Figure 23: DPAK (TO-252) type A package outline
12/29
DocID9565 Rev 7
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Package information
Table 11: DPAK (TO-252) type A mechanical data
mm
Dim.
Min.
Typ.
Max.
A
2.20
2.40
A1
0.90
1.10
A2
0.03
0.23
b
0.64
0.90
b4
5.20
5.40
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
D1
4.95
E
6.40
E1
4.60
4.70
4.80
e
2.16
2.28
2.40
e1
4.40
4.60
H
9.35
10.10
L
1.00
1.50
(L1)
2.60
2.80
3.00
L2
0.65
0.80
0.95
L4
0.60
R
V2
5.10
5.25
6.60
1.00
0.20
0°
DocID9565 Rev 7
8°
13/29
Package information
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Figure 24: DPAK (TO-252) type A recommended footprint (dimensions are in mm)
14/29
DocID9565 Rev 7
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
4.2.2
Package information
DPAK (TO-252) type C2 package information
Figure 25: DPAK (TO-252) type C2 package outline
0068772_C2_22
DocID9565 Rev 7
15/29
Package information
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Table 12: DPAK (TO-252) type C2 mechanical data
mm
Dim.
Min.
Typ.
Max.
A
2.20
2.30
2.38
A1
0.90
1.01
1.10
A2
0.00
0.10
b
0.72
0.85
b4
5.13
c
0.47
0.60
c2
0.47
0.60
D
6.00
D1
5.10
E
6.50
E1
5.20
e
2.186
2.286
2.386
H
9.80
10.10
10.40
L
1.40
1.50
1.70
L1
L2
6.20
5.60
6.60
6.70
5.50
0.90
1.25
0.51 BSC
0.60
L6
16/29
6.10
5.46
2.90 REF
L3
L4
5.33
0.80
1.00
1.80 BSC
θ1
5°
7°
9°
θ2
5°
7°
9°
V2
0°
DocID9565 Rev 7
8°
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Package information
Figure 26: DPAK (TO-252) type C2 recommended footprint (dimensions are in mm)
FP_0068772_22
DocID9565 Rev 7
17/29
Package information
4.2.3
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
DPAK (TO-252) type E package information
Figure 27: DPAK (TO-252) type E package outline
18/29
DocID9565 Rev 7
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Package information
Table 13: DPAK (TO-252) type E mechanical data
mm
Dim.
Min.
A
Typ.
2.18
Max.
2.39
A2
0.13
b
0.65
0.884
b4
4.95
5.46
c
0.46
0.61
c2
0.46
0.60
D
5.97
6.22
D1
5.21
E
6.35
E1
4.32
6.73
e
2.286
e1
4.572
H
9.94
10.34
L
1.50
1.78
L1
L2
2.74
0.89
L4
1.27
1.02
Figure 28: DPAK (TO-252) type E recommended footprint (dimensions are in mm)
DocID9565 Rev 7
19/29
Package information
4.2.4
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
DPAK (TO-252) packing information
Figure 29: DPAK (TO-252) tape outline
20/29
DocID9565 Rev 7
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Package information
Figure 30: DPAK (TO-252) reel outline
Table 14: DPAK (TO-252) tape and reel mechanical data
Tape
Reel
mm
mm
Dim.
Dim.
Min.
Max.
A0
6.8
7
A
B0
10.4
10.6
B
1.5
12.1
C
12.8
1.6
D
20.2
G
16.4
50
B1
Min.
Max.
330
13.2
D
1.5
D1
1.5
E
1.65
1.85
N
F
7.4
7.6
T
K0
2.55
2.75
P0
3.9
4.1
Base qty.
2500
P1
7.9
8.1
Bulk qty.
2500
P2
1.9
2.1
R
40
T
0.25
0.35
W
15.7
16.3
DocID9565 Rev 7
18.4
22.4
21/29
Package information
4.3
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
TO-220FP package information
Figure 31: TO-220FP package outline
7012510_Rev_12_B
22/29
DocID9565 Rev 7
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Package information
Table 15: TO-220FP package mechanical data
mm
Dim.
Min.
Typ.
Max.
A
4.4
4.6
B
2.5
2.7
D
2.5
2.75
E
0.45
0.7
F
0.75
1
F1
1.15
1.70
F2
1.15
1.70
G
4.95
5.2
G1
2.4
2.7
H
10
10.4
L2
16
L3
28.6
30.6
L4
9.8
10.6
L5
2.9
3.6
L6
15.9
16.4
L7
9
9.3
Dia
3
3.2
DocID9565 Rev 7
23/29
Package information
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
4.4
TO-220 package information
4.4.1
TO-220 type A package information
Figure 32: TO-220 type A package outline
24/29
DocID9565 Rev 7
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Package information
Table 16: TO-220 type A mechanical data
mm
Dim.
Min.
Typ.
Max.
A
4.40
4.60
b
0.61
0.88
b1
1.14
1.55
c
0.48
0.70
D
15.25
D1
15.75
1.27
E
10.00
10.40
e
2.40
2.70
e1
4.95
5.15
F
1.23
1.32
H1
6.20
6.60
J1
2.40
2.72
L
13.00
14.00
L1
3.50
3.93
L20
16.40
L30
28.90
øP
3.75
3.85
Q
2.65
2.95
DocID9565 Rev 7
25/29
Package information
4.4.2
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
TO-220 type H package information
Figure 33: TO-220 type H package outline
0015988_H_21
26/29
DocID9565 Rev 7
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Package information
Table 17: TO-220 type H package mechanical data
mm
Dim.
Min.
Typ.
Max.
A
4.40
4.45
4.50
A1
1.22
A2
2.49
2.59
2.69
A3
1.17
1.27
1.37
1.32
b
0.78
0.87
b2
1.25
1.34
b4
1.20
1.29
b6
1.50
b7
1.45
c
0.49
D
15.40
15.50
15.60
D1
9.05
9.15
9.25
E
10.08
10.18
10.28
e
2.44
2.54
2.64
e1
4.98
5.08
5.18
H1
6.25
6.35
6.45
L
13.20
13.40
13.60
L1
3.50
3.70
3.90
L2
16.30
16.40
16.50
L3
28.70
28.90
29.10
∅P
3.75
3.80
3.85
Q
2.70
2.80
2.90
DocID9565 Rev 7
0.56
27/29
Revision history
5
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
Revision history
Table 18: Document revision history
28/29
Date
Revision
Changes
09-Sep-2004
3
Complete document
10-Aug-2006
4
New template, no content change
26-Feb-2009
5
Updated mechanical data
07-Sep-2009
6
VESD(G-S) value has been corrected
06-Apr-2017
7
Updated Section 1: "Electrical ratings", Section 2: "Electrical
characteristics" and Section 4: "Package information".
Minor text changes
DocID9565 Rev 7
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z,
STP3NK80Z
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2017 STMicroelectronics – All rights reserved
DocID9565 Rev 7
29/29