STF43N60DM2

STF43N60DM2 N-channel 600 V, 0.085 Ω typ., 34 A MDmesh™ DM2 Power MOSFET in a TO-220FP package Datasheet - production data Features 1 2 Order code VDS @ Tjmax. RDS(on) max. ID PTOT STF43N60DM2 650 V 0.093 Ω 34 A 40 W • • 3 • • • • TO-220FP Fast-recovery body diode Extremely low gate charge and input capacitance Low on-resistance 100% avalanche tested Extremely high dv/dt ruggedness Zener-protected Figure 1: Internal schematic diagram Applications • Switching applications Description This high voltage N-channel Power MOSFET is part of the MDmesh™ DM2 fast recovery diode series. It offers very low recovery charge (Qrr) and time (trr) combined with low RDS(on), rendering it suitable for the most demanding high efficiency converters and ideal for bridge topologies and ZVS phase-shift converters. Table 1: Device summary Order code Marking Package Packing STF43N60DM2 43N60DM2 TO-220FP Tube July 2015 DocID026789 Rev 2 This is information on a product in full production. 1/13 www.st.com Contents STF43N60DM2 Contents 1 Electrical ratings ............................................................................. 3 2 Electrical characteristics ................................................................ 4 2.1 Electrical characteristics (curves) ...................................................... 6 3 Test circuits ..................................................................................... 8 4 Package information ....................................................................... 9 4.1 5 2/13 TO-220FP package information ...................................................... 10 Revision history ............................................................................ 12 DocID026789 Rev 2 STF43N60DM2 1 Electrical ratings Electrical ratings Table 2: Absolute maximum ratings Symbol VGS (1) ID (2) IDM PTOT Parameter Value Unit Gate-source voltage ±25 V Drain current (continuous) at Tcase = 25 °C 34 Drain current (continuous) at Tcase = 100 °C 21 Drain current (pulsed) 136 A W Total dissipation at Tcase = 25 °C 40 dv/dt (3) Peak diode recovery voltage slope 50 dv/dt (4) MOSFET dv/dt ruggedness 50 VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t = 1 s; TC = 25 °C) Tstg Storage temperature Tj Operating junction temperature A V/ns 2500 V -55 to 150 °C Value Unit Notes: (1) (2) limited by maximum junction temperature. Pulse width is limited by safe operating area. (3) ISD ≤ 34 A, di/dt=900 A/μs; VDS peak < V(BR)DSS, VDD = 400 V. (4) VDS ≤ 480 V. Table 3: Thermal data Symbol Parameter Rthj-case Thermal resistance junction-case 0.32 Rthj-amb Thermal resistance junction-ambient 62.5 °C/W Table 4: Avalanche characteristics Symbol IAR (1) EAS Parameter Avalanche current, repetitive or not repetitive Single pulse avalanche energy Value Unit 6 A 800 mJ Notes: (1) starting Tj = 25 °C, ID = IAR, VDD = 50 V. DocID026789 Rev 2 3/13 Electrical characteristics 2 STF43N60DM2 Electrical characteristics (Tcase = 25 °C unless otherwise specified) Table 5: Static Symbol Parameter Test conditions V(BR)DSS Drain-source breakdown voltage VGS = 0 V, ID = 1 mA Min. Typ. Max. 600 Unit V VGS = 0 V, VDS = 600 V 1 VGS = 0 V, VDS = 600 V, Tcase = 125 °C 100 ±5 µA 4 5 V 0.085 0.093 Ω Min. Typ. Max. Unit - 2500 - - 120 - - 3 - IDSS Zero gate voltage drain current IGSS Gate-body leakage current VDS = 0 V, VGS = ±25 V VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA RDS(on) Static drain-source onresistance VGS = 10 V, ID = 17 A 3 µA Table 6: Dynamic Symbol Parameter Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Test conditions VDS = 100 V, f = 1 MHz, VGS = 0 V pF Equivalent output capacitance VDS = 0 to 480 V, VGS = 0 V - 200 - pF RG Intrinsic gate resistance f = 1 MHz, ID = 0 A - 4 - Ω Qg Total gate charge - 56 - Qgs Gate-source charge - 13 - Qgd Gate-drain charge VDD = 480 V, ID = 34 A, VGS = 10 V (see Figure 15: "Gate charge test circuit") - 30 - Coss eq. (1) nC Notes: (1) Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS. Table 7: Switching times Symbol td(on) tr td(off) tf 4/13 Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions Min. Typ. Max. VDD = 300 V, ID = 25 A RG = 4.7 Ω, VGS = 10 V (see Figure 14: "Switching times test circuit for resistive load" and Figure 19: "Switching time waveform") - 29 - DocID026789 Rev 2 - 27 - - 85 - - 6 - Unit ns STF43N60DM2 Electrical characteristics Table 8: Source-drain diode Symbol (1) ISD Parameter Test conditions Min. Typ. Max. Unit Source-drain current - 34 A (2) Source-drain current (pulsed) - 136 A (3) Forward on voltage VGS = 0 V, ISD = 34 A - 1.6 V trr Reverse recovery time - 120 ns Qrr Reverse recovery charge - 0.6 µC IRRM Reverse recovery current ISD = 34 A, di/dt = 100 A/µs, VDD = 60 V (see Figure 16: "Test circuit for inductive load switching and diode recovery times") - 10.4 A - 240 ns - 2.4 µC - 20.5 A ISDM VSD trr Reverse recovery time Qrr Reverse recovery charge Reverse recovery current ISD = 34 A, di/dt = 100 A/µs, VDD = 60 V, Tj = 150 °C (see Figure 16: "Test circuit for inductive load switching and diode recovery times") Notes: (1) (2) (3) Limited by maximum junction temperature. Pulse width is limited by safe operating area. Pulse test: pulse duration = 300 µs, duty cycle 1.5%. DocID026789 Rev 2 5/13 Electrical characteristics 2.1 STF43N60DM2 Electrical characteristics (curves) Figure 2: Safe operating area Figure 3: Thermal impedance K GC20521 δ = 0.5 δ = 0.2 δ = 0.1 10-1 10-2 δ = 0.05 δ = 0.02 δ = 0.01 Zth = K*Rthj-c SINGLE PULSE δ = tp / Ƭ tp Ƭ -3 10 6/13 10-4 10-3 10-2 10-1 100 Tp(s) Figure 4: Output characteristics Figure 5: Transfer characteristics Figure 6: Gate charge vs gate-source voltage Figure 7: Static drain-source on-resistance DocID026789 Rev 2 STF43N60DM2 Electrical characteristics Figure 8: Capacitance variations Figure 9: Normalized gate threshold voltage vs temperature Figure 10: Normalized on-resistance vs temperature Figure 11: Normalized V(BR)DSS vs temperature Figure 12: Output capacitance stored energy Figure 13: Source- drain diode forward characteristics DocID026789 Rev 2 7/13 Test circuits 3 STF43N60DM2 Test circuits Figure 14: Switching times test circuit for resistive load Figure 15: Gate charge test circuit Figure 16: Test circuit for inductive load switching and diode recovery times Figure 17: Unclamped inductive load test circuit Figure 18: Unclamped inductive waveform Figure 19: Switching time waveform 8/13 DocID026789 Rev 2 STF43N60DM2 4 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ® ® ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ® ECOPACK is an ST trademark. DocID026789 Rev 2 9/13 Package information 4.1 STF43N60DM2 TO-220FP package information Figure 20: TO-220FP package outline 7012510_Rev_K_B 10/13 DocID026789 Rev 2 STF43N60DM2 Package information Table 9: TO-220FP package mechanical data mm Dim. Min. Typ. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 DocID026789 Rev 2 11/13 Revision history 5 STF43N60DM2 Revision history Table 10: Document revision history Date Revision 06-Aug-2014 1 First release. 2 Text and formatting changes throughout document Datasheet promoted from preliminary data to production data On cover page: - updated title description - updated features table In Section Electrical ratings: - updated Table Absolute maximum ratings - updated Table Thermal data - updated Table Avalanche characteristics In Section Electrical characteristics: - updated and renamed Table Static (was On/off states) - updated Table Dynamic - updated Table Switching times - updated Table Source-drain diode Added Section 2.1 Electrical characteristics (curves) 01-Jul-2015 12/13 Changes DocID026789 Rev 2 STF43N60DM2 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved DocID026789 Rev 2 13/13