STF7NM80

STD7NM80, STD7NM80-1 STF7NM80, STP7NM80 Datasheet N-channel 800 V, 0.95 Ω typ., 6.5 A MDmesh™ II Power MOSFETs in DPAK, IPAK, TO-220FP and TO-220 packages Features TAB DPAK 2 3 1 Order codes VDS RDS(on)max. ID 800 V 1.05 Ω 6.5 A STD7NM80 TAB 3 1 IPAK 2 1 TAB 2 STD7NM80-1 3 STF7NM80 TO-220FP STP7NM80 TO-220 1 2 3 • • • 100% avalanche tested Low input capacitance and gate charge Low gate input resistance D(2) Applications • G(1) Switching applications Description S(3) AM01475v1_noZen_noTab These devices are N-channel Power MOSFETs developed using the second generation of MDmesh™ technology. These revolutionary Power MOSFETs associate a vertical structure to the company’s strip layout to yield one of the world’s lowest on-resistance and gate charge. They are therefore suitable for the most demanding high-efficiency converters. Product status STD7NM80 STD7NM80-1 STF7NM80 STP7NM80 DS4854 - Rev 4 - August 2018 For further information contact your local STMicroelectronics sales office. www.st.com STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 Electrical ratings 1 Electrical ratings Table 1. Absolute maximum ratings Value Symbol Parameter DPAK, IPAK, TO-220 VDS Drain-source voltage 800 VGS Gate-source voltage ±30 TO-220FP Unit V V ID Drain current (continuous) at TC = 25 °C 6.5 ID Drain current (continuous) at TC = 100 °C 4 4 (1) A IDM (2) Drain current (pulsed) 26 26 (1) A PTOT Total dissipation at TC = 25 °C 90 25 W VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t = 1 s; TC = 25 °C) 2.5 kV Tj Tstg Operating junction temperature range 6.5 (1) -55 to 150 Storage temperature range A °C 1. Limited by maximum junction temperature. 2. Pulse width limited by safe operating area. Table 2. Thermal data Symbol Value Parameter Rthj-case Thermal resistance junction-case Rthj-amb Thermal resistance junction-ambient Rthj-pcb(1) Thermal resistance junction-pcb DPAK IPAK 1.4 100 TO-220FP TO-220 5 1.4 62.5 Unit °C/W °C/W 50 °C/W 1. When mounted on 1inch² FR-4 board, 2 oz Cu. Table 3. Avalanche characteristics Symbol IAS EAS DS4854 - Rev 4 Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tjmax) Single pulse avalanche energy (starting Tj = 25 °C, ID = IAS, VDD = 50 V) Value Unit 1 A 240 mJ page 2/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 Electrical characteristics 2 Electrical characteristics (TCASE = 25 °C unless otherwise specified) Table 4. On/off states Symbol V(BR)DSS Parameter Drain-source breakdown voltage Test condition ID = 1 mA, VGS = 0 V Min. Typ. Max. 800 Unit V VGS = 0 V, VDS = 800 V 10 µA VGS = 0 V, VDS = 800 V, TC = 125 °C(1) 100 µA ±100 nA 4 5 V 0.95 1.05 Ω Typ. Max. Unit - pF - Ω - nC Max. Unit - ns Max. Unit IDSS Zero gate voltage drain current IGSS Gate body leakage current VDS = 0 V, VGS = ±30 V VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA RDS(on) Static drain-source onresistance VGS = 10 V, ID = 3.25 A 3 1. Defined by design, not subject to production test. Table 5. Dynamic Symbol Ciss Parameter Test condition Min. Input capacitance 620 VDS = 50 V, f = 1 MHz, VGS = 0 V Coss Output capacitance Crss Reverse transfer capacitance Rg Gate input resistance f = 1 MHz open drain Qg Total gate charge Qgs Gate-source charge Qgd Gate-drain charge VDD = 640 V, ID = 6.5 A, VGS = 0 to 10 V (see Figure 17. Test circuit for gate charge behavior) - 460 15 - 7 18 - 4 11 Table 6. Switching times Symbol td(on) tr td(off) tf Parameter Test condition Turn-on delay time VDD = 400 V, ID = 3.25 A, Rise time RG = 4.7 Ω, VGS = 10 V Turn-off delay time (see Figure 16. Test circuit for resistive load switching times and Figure 21. Switching time waveform) Fall time Min. Typ. 20 8 - 35 10 Table 7. Source-drain diode Symbol ISD ISDM DS4854 - Rev 4 Parameter Source-drain current (1) Source-drain current (pulsed) Test condition Min. - Typ. 6.5 26 A page 3/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 Electrical characteristics Symbol VSD (2) Parameter Test condition Forward on voltage ISD = 6.5 A, VGS = 0 V Reverse recovery time ISD = 6.5 A, di/dt = 100 V Qrr Reverse recovery charge IRRM Reverse recovery current VDD = 50 V (see Figure 18. Test circuit for inductive load switching and diode recovery times) trr trr Reverse recovery time ISD = 6.5 A, di/dt = 100 A/µs Qrr Reverse recovery charge IRRM Reverse recovery current VDD = 50 V (see Figure 18. Test circuit for inductive load switching and diode recovery times) Min. Typ. - - - Max. Unit 1.3 V 460 ns 4 μC 17 A 680 ns 6 μC 17 A 1. Pulse width limited by safe operating area. 2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%. DS4854 - Rev 4 page 4/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 Electrical characteristics (curves) 2.1 Electrical characteristics (curves) Figure 1. Safe operating area for DPAK and IPAK Figure 2. Thermal impedance for DPAK and IPAK GC20460 K 100 10-1 10-2 10-5 Figure 3. Safe operating area for TO-220FP 10-4 10-3 10-2 10-1 tp (s) Figure 4. Thermal impedance for TO-220FP K GC20940 10 -1 10 -2 10 -3 10 -4 Figure 5. Safe operating area for TO-220 DS4854 - Rev 4 10 -3 10 -2 10 -1 10 0 t p (s) Figure 6. Thermal impedance for TO-220 page 5/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 Electrical characteristics (curves) Figure 7. Output characterisics Figure 8. Transfer characteristics Figure 9. Static drain-source on-resistance Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations Figure 12. Normalized gate threshold voltage vs temperature 2 DS4854 - Rev 4 page 6/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 Electrical characteristics (curves) Figure 13. Normalized on-resistance vs temperature Figure 14. Source-drain diode forward characteristics Figure 15. Normalized V(BR)DSS vs temperature 8 DS4854 - Rev 4 page 7/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 Test circuits 3 Test circuits Figure 16. Test circuit for resistive load switching times Figure 17. Test circuit for gate charge behavior VDD 12 V 2200 + μF 3.3 μF VDD VD VGS 1 kΩ 100 nF RL IG= CONST VGS RG 47 kΩ + pulse width D.U.T. 2.7 kΩ 2200 μF pulse width D.U.T. 100 Ω VG 47 kΩ 1 kΩ AM01469v1 AM01468v1 Figure 18. Test circuit for inductive load switching and diode recovery times D G A D.U.T. S 25 Ω A L A B B 3.3 µF D G + VD 100 µH fast diode B Figure 19. Unclamped inductive load test circuit RG 1000 + µF 2200 + µF VDD 3.3 µF VDD ID D.U.T. S D.U.T. Vi _ pulse width AM01471v1 AM01470v1 Figure 21. Switching time waveform Figure 20. Unclamped inductive waveform ton V(BR)DSS td(on) VD toff td(off) tr tf 90% 90% IDM VDD 10% 0 ID VDD AM01472v1 VGS 0 VDS 10% 90% 10% AM01473v1 DS4854 - Rev 4 page 8/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DS4854 - Rev 4 page 9/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 DPAK (TO-252) type A2 package information 4.1 DPAK (TO-252) type A2 package information Figure 22. DPAK (TO-252) type A2 package outline 0068772_type-A2_rev25 DS4854 - Rev 4 page 10/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 DPAK (TO-252) type A2 package information Table 8. DPAK (TO-252) type A2 mechanical data Dim. mm Min. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 4.95 E 6.40 E1 5.10 5.20 5.30 e 2.159 2.286 2.413 e1 4.445 4.572 4.699 H 9.35 10.10 L 1.00 1.50 L1 2.60 2.80 3.00 L2 0.65 0.80 0.95 L4 0.60 R V2 DS4854 - Rev 4 Typ. 5.10 5.25 6.60 1.00 0.20 0° 8° page 11/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 DPAK (TO-252) type A2 package information Figure 23. DPAK (TO-252) recommended footprint (dimensions are in mm) FP_0068772_25 DS4854 - Rev 4 page 12/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 DPAK (TO-252) packing information 4.2 DPAK (TO-252) packing information Figure 24. DPAK (TO-252) tape outline 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 K0 For machine ref. only including draft and radii concentric around B0 W B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 DS4854 - Rev 4 page 13/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 DPAK (TO-252) packing information Figure 25. DPAK (TO-252) reel outline T 40mm min. access hole at slot location B D C N A G measured at hub Tape slot in core for tape start 2.5mm min.width Full radius AM06038v1 Table 9. DPAK (TO-252) tape and reel mechanical data Tape Dim. mm mm Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 DS4854 - Rev 4 Reel Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 18.4 22.4 page 14/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 IPAK (TO-251) type A package information 4.3 IPAK (TO-251) type A package information Figure 26. IPAK (TO-251) type A package outline 0068771_IK_typeA_rev14 DS4854 - Rev 4 page 15/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 IPAK (TO-251) type A package information Table 10. IPAK (TO-251) type A package mechanical data Dim. mm Min. Typ. A 2.20 2.40 A1 0.90 1.10 b 0.64 0.90 b2 b4 0.95 5.20 B5 5.40 0.30 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 E 6.40 6.60 e e1 2.28 4.40 H DS4854 - Rev 4 Max. 4.60 16.10 L 9.00 9.40 L1 0.80 1.20 L2 0.80 V1 10° 1.00 page 16/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 TO-220FP package information 4.4 TO-220FP package information Figure 27. TO-220FP package outline 7012510_Rev_12_B DS4854 - Rev 4 page 17/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 TO-220FP package information Table 11. TO-220FP package mechanical data Dim. mm Min. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 DS4854 - Rev 4 Typ. 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 page 18/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 TO-220 type A package information 4.5 TO-220 type A package information Figure 28. TO-220 type A package outline 0015988_typeA_Rev_21 DS4854 - Rev 4 page 19/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 TO-220 type A package information Table 12. TO-220 type A package mechanical data Dim. mm Min. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 15.75 D1 DS4854 - Rev 4 Typ. 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 øP 3.75 3.85 Q 2.65 2.95 page 20/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 Ordering information 5 Ordering information Table 13. Order codes DS4854 - Rev 4 Order code Marking Package Packing STD7NM80 D7NM80 DPAK Tape and reel STD7NM80-1 D7NM80 IPAK STF7NM80 F7NM80 TO-220FP STP7NM80 P7NM80 TO-220 Tube page 21/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 Revision history Table 14. Document revision history DS4854 - Rev 4 Date Version Changes 22-Sep-2006 1 First release. 09-Oct-2007 2 Added new section: Electrical characteristics (curves). 02-Oct-2009 3 Corrected marking and description on first page. 20-Aug-2018 4 Updated Section 4 Package information. Minor text changes. page 22/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 Contents Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 5 4.1 DPAK (TO-252) type A2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.2 DPAK (TO-252) packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4.3 IPAK (TO-251) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.4 TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.5 TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 DS4854 - Rev 4 page 23/24 STD7NM80, STD7NM80-1, STF7NM80, STP7NM80 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved DS4854 - Rev 4 page 24/24