STGB20N40LZ

STGB20N40LZ, STGD20N40LZ Automotive-grade 390 V internally clamped IGBT ESCIS 300 mJ Datasheet - production data Features • Designed for automotive applications and AEC-Q101 qualified TAB • ESD gate-emitter protection TAB • Gate-collector high voltage clamping 3 • Logic level gate drive 1 3 1 • Low saturation voltage DPAK D2PAK • High pulsed current capability • Gate and gate-emitter resistor Applications Figure 1. Internal schematic diagram C (2 or TAB) • Pencil coil electronic ignition driver Description This application-specific IGBT utilizes the most advanced PowerMESH™ technology. The built-in Zener diodes between gate-collector and gateemitter provide overvoltage protection capabilities. The device also exhibits low on-state voltage drop and low threshold drive for use in automotive ignition systems. RG G (1) RGE E (3) SC30180 Table 1. Device summary Order codes Marking Packages Packaging STGB20N40LZ GB20N40LZ D2PAK Tape and reel STGD20N40LZ GD20N40LZ DPAK Tape and reel June 2014 This is information on a product in full production. DocID024251 Rev 5 1/20 www.st.com Contents STGB20N40LZ, STGD20N40LZ Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 2/20 ............................................... 9 DocID024251 Rev 5 STGB20N40LZ, STGD20N40LZ 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter D2PAK DPAK Unit VCES Collector-emitter voltage (vGE = 0) VCES(clamped) V VECS Emitter collector voltage (VGE = 0) 20 V Collector current (continuous) at TC = 100 °C 25 A Pulsed collector current 40 A VGE(clamped) V IC ICP (1) VGE Gate-emitter voltage PTOT Total dissipation at TC = 25 °C ESCIS Single pulse energy TC = 25 °C, L = 3 mH, VCC = 50 V 300 mJ ESCIS Single pulse energy TC =150 °C, L = 3 mH, VCC = 50 V 180 mJ 8 kV 600 V 4 kV – 55 to 175 °C 125 Human body model, R= 1.5 kΩ, C = 100 pF ESD Machine model, R = 0, C = 100 pF Charged device model Tstg Tj 150 W Storage temperature Operating junction temperature 1. Pulse width limited by maximum junction temperature. Table 3. Thermal data Value Symbol Parameter DPAK D2PAK Unit Rthj-case Thermal resistance junction-case 1.2 1 °C/W Rthj-amb Thermal resistance junction-ambient 100 62.5 °C/W DocID024251 Rev 5 3/20 20 Electrical characteristics 2 STGB20N40LZ, STGD20N40LZ Electrical characteristics TJ = 25 °C unless otherwise specified. Table 4. Static electrical characteristics Symbol Parameter Test conditions Collector emitter VCES(clamped) clamped voltage (VGE = 0) Min. IC = 2 mA IC = 2 mA, TJ = - 40 °C to 175 °C 365 IC = 75 mA IC = 75 mA TJ = - 40 °C to 175 °C 20 VGE(clamped) Gate emitter clamped voltage IG = ±2 mA TJ = - 40 °C to 175 °C 12 ICES Collector cut-off current (VGE = 0) Gate-emitter leakage current (VCE = 0) VGE = ±10 V IGES RG Gate resistance VGE(th) Gate threshold voltage VCE(sat) Collector emitter saturation voltage gfe 425 28 V V VCE = 15 V, TJ = 175 °C 20 µA VCE = 200 V, TJ = 175 °C 100 µA 625 450 11 16 µA 900 µA 22 kΩ Ω 100 Forward transconductance V V VGE = ±10 V Gate emitter resistance V 16 TJ = - 40 °C to 175 °C RGE Max. Unit 390 Emitter collector break-down voltage (VGE = 0) VECS Typ. VGE =VCE, IC = 1 mA 1.5 1.95 2.5 V VGE =VCE, IC = 1 mA, TJ = 175 °C 0.85 1.3 1.7 V VGE = 4.5 V, IC = 10 A, TJ = 175 °C 1.5 1.8 V VGE = 4 V, IC = 6 A, 1.30 1.6 V VCE = 25 V, IC = 10 A 10.3 S Min. Typ. Max. Unit Table 5. Dynamic electrical characteristics Symbol Test conditions Cies Input capacitance Coes Output capacitance Cres Reverse transfer capacitance Qg 4/20 Parameter Gate charge VCE = 25 V, f = 1 MHz, VGE = 0 VCE = 280 V, IC = 10 A, VGE = 5 V DocID024251 Rev 5 - 910 - pF - 70 - pF - 10 - pF - 24 - nC STGB20N40LZ, STGD20N40LZ Electrical characteristics Table 6. Switching on/off Symbol Parameter Test conditions Min. Typ. Max. Unit td(on) tr Resistive load Turn-on delay time Rise time VCC = 14 V, Rg= 1kΩ, RL = 1 Ω, VGE = 5 V - 0.7 4 - µs µs td(on) tr Resistive load Turn-on delay time Rise time VCC = 14 V, Rg= 1kΩ, RL = 1 Ω, VGE = 5 V, TJ = 150 °C - 0.7 4.5 - µs µs td(off) tf dv/dt Inductive load Turn-off delay time Fall time Turn-off voltage slope VCC = 300 V, L = 1 mH IC = 10 A, VGE = 5 V, Rg= 1kΩ, - td(off) tf dv/dt Inductive load Turn-off delay time Fall time Turn-off voltage slope VCC = 300 V, L = 1 mH IC = 10 A, VGE = 5 V, Rg= 1kΩ, TJ = 150 °C - DocID024251 Rev 5 4.3 1.5 165 4.7 3.5 115 - - µs µs V/µs µs µs V/µs 5/20 20 Electrical characteristics 2.1 STGB20N40LZ, STGD20N40LZ Electrical characteristics (curves) Figure 2. Collector-emitter on voltage vs temperature (Vge= 4.5 V) GIPD170620131357FSR Vce(sat) (V) Figure 3. Collector-emitter on voltage vs temperature (IC= 6 A) GIPD180620131124FSR Vce(sat) (V) IC= 15A 2 1.45 1.75 1.35 Vge= 3.8V Vge= 4.5V IC= 10A 1.25 1.5 Vge= 5.0V 1.15 1.25 IC= 6A 1 -100 -50 50 0 100 150 TJ(°C) Figure 4. Collector-emitter on voltage vs temperature (IC= 10 A) GIPD180620131131FSR Vce(sat) (V) 1.05 -100 1.7 0 50 100 150 TJ(°C) Figure 5. Self clamped inductive switch GIPD180620131141FSR ISCIS (A) TJ= 25°C Vge= 3.8V 1.9 -50 TJ= 150°C Vge= 4.5V 10 1.5 Vge= 5.0V VCE = 13 V VGE = 5 V RG = 1 kΩ 1.3 1.1 -100 6/20 -50 0 50 100 150 TJ(°C) DocID024251 Rev 5 1 0.1 1 L(mH) STGB20N40LZ, STGD20N40LZ Electrical characteristics Figure 6. Output characteristics (TJ= 25 °C) GIPD180620131201FSR IC (A) 45 40 Figure 7. Output characteristics (TJ= -40 °C) 7.5V 7.0V 50 7.5V 40 7.0V 6.5V 30 6.0V 5.5V 6.5V 35 6.0V 30 5.5V 25 5.0V 20 5.0V 4.5V 15 20 4.0V 10 VGE= 3.5V 5 VGE= 3.5V 2 4 6 8 0 10 VCE(V) Figure 8. Output characteristics (TJ= 175 °C) GIPD180620131411FSR IC (A) 45 7.0V 35 25 6.5V 6.0V 5.5V 5.0V 20 4.5V 30 4 6 8 10 VCE(V) GIPD180620131417FSR IC (A) VCE= 15 V 50 TJ= -40°C 40 30 TJ= 25°C 20 4.0V 15 2 Figure 9. Transfer characteristics 7.5V 40 TJ= 175°C 10 10 VGE= 3.5V 5 0 4.5V 4.0V 10 0 GIPD180620131405FSR IC (A) 4 2 6 8 Figure 10. Collector cut-off current vs. temperature GIPD170620131412FSR ICES (µA) 2 3 4 5 6 7 VGE(V) Figure 11. Normalized collector emitter voltage vs temperature GIPD1706201314125SR VCES (norm) 1.05 VCE= 350V 10 0 1 10 VCE(V) IC= 2mA 1 1 0.99 VCE= 200V 0.1 -50 0 50 100 150 TJ(°C) 0.98 -100 DocID024251 Rev 5 -50 0 50 100 150 TJ(°C) 7/20 20 Electrical characteristics STGB20N40LZ, STGD20N40LZ Figure 12. Normalized gate threshold voltage vs temperature GIPD1706201314132SR Vth (norm) VGE = VCE IC = 1mA Figure 13. Normalized collector emitter onvoltage vs temperature GIPD180620131434FSR Vce(sat) (norm) VGE= 4.5V IC= 10A 1.1 1.05 1 1 0.8 0.95 0.9 0.6 -100 -50 0 50 100 150 TJ(°C) Figure 14. Thermal impedance for D²PAK 8/20 0.85 -100 -50 0 50 100 150 TJ(°C) Figure 15. Thermal impedance for DPAK DocID024251 Rev 5 STGB20N40LZ, STGD20N40LZ 3 Test circuits Test circuits Figure 16. Inductive load switching and ESCIS test circuit Figure 17. Resistive load switching L AM01504v1 AM01504v2 Figure 18. Gate charge test circuit Figure 19. Switching waveform 90% 10% VG 90% VCE 10% Tr(Voff) Tcross 90% IC Td(off) Td(on) Tr(Ion) Ton AM01505v1 DocID024251 Rev 5 10% Tf Toff AM01506v1 9/20 20 Package mechanical data 4 STGB20N40LZ, STGD20N40LZ Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Figure 20. D²PAK (TO-263) drawing 0079457_T 10/20 DocID024251 Rev 5 STGB20N40LZ, STGD20N40LZ Package mechanical data Table 7. D²PAK (TO-263) mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 E 10 E1 8.50 10.40 e 2.54 e1 4.88 5.28 H 15 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R V2 0.4 0° 8° DocID024251 Rev 5 11/20 20 Package mechanical data STGB20N40LZ, STGD20N40LZ Figure 21. D²PAK footprint(a) 16.90 12.20 5.08 1.60 3.50 9.75 a. All dimension are in millimeters 12/20 DocID024251 Rev 5 Footprint STGB20N40LZ, STGD20N40LZ Package mechanical data Figure 22. DPAK (TO-252) type A drawing 0068772_M_type_A DocID024251 Rev 5 13/20 20 Package mechanical data STGB20N40LZ, STGD20N40LZ Table 8. DPAK (TO-252) type A mechanical data mm Dim. Min. Typ. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 E 5.10 6.40 6.60 E1 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1.00 1.50 (L1) 2.80 L2 0.80 L4 0.60 1.00 R V2 14/20 Max. 0.20 0° 8° DocID024251 Rev 5 STGB20N40LZ, STGD20N40LZ Package mechanical data Figure 23. DPAK (TO-252) type A footprint (b) Footprint_REV_M_type_A b. All dimensions are in millimeters DocID024251 Rev 5 15/20 20 Packaging mechanical data 5 STGB20N40LZ, STGD20N40LZ Packaging mechanical data Figure 24. Tape drawing 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 K0 For machine ref. only including draft and radii concentric around B0 W B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 16/20 DocID024251 Rev 5 STGB20N40LZ, STGD20N40LZ Packaging mechanical data Figure 25. Reel drawing T REEL DIMENSIONS 40mm min. Access hole At sl ot location B D C N A Full radius G measured at hub Tape slot in core for tape start 25 mm min. width AM08851v2 Table 9. D²PAK (TO-263) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base qty 1000 P2 1.9 2.1 Bulk qty 1000 R 50 T 0.25 0.35 W 23.7 24.3 DocID024251 Rev 5 Min. Max. 330 13.2 26.4 30.4 17/20 20 Packaging mechanical data STGB20N40LZ, STGD20N40LZ Table 10. DPAK (TO-252) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 18/20 Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 DocID024251 Rev 5 18.4 22.4 STGB20N40LZ, STGD20N40LZ 6 Revision history Revision history Table 11. Document revision history Date Revision Changes 08-Feb-2013 1 Initial release. 24-Jun-2013 2 Added device in D2PAK. Modified Table 1: Device summary. Added Section 2.1: Electrical characteristics (curves). Updated Section 4: Package mechanical data and Section 5: Packaging mechanical data. Minor text changes. 25-Sep-2013 3 Updated td(on) value for resistive load in Table 6: Switching on/off. Updated mechanical data for DPAK. Minor text changes. 14-Jan-2014 4 Modified title in cover page. Added: ESCIS in Table 2, VECS and gfs values in Table 4. Modified minimum value of VGE(clamped) in Table 4 Updated Section 4: Package mechanical data Modified order codes in Table 1. Minor text changes. 4-Jun-2014 5 Updated features in cover page. DocID024251 Rev 5 19/20 20 STGB20N40LZ, STGD20N40LZ Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2014 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 20/20 DocID024251 Rev 5