STGB6NC60HDT4

STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD Datasheet N-channel 600 V, 7 A, very fast IGBT Features TAB 3 1 D2 PAK 1 2 3 TO-220FP TAB 1 2 3 • Low VCE(sat) • Low CRES/CIES ratio (no cross-conduction susceptibility) • • Very soft ultra fast recovery antiparallel diode High-frequency operation Applications TO-220 • • • C(2, TAB) G(1) High-frequency inverters SMPS and PFC in both hard switch and resonant topologies Motor drivers Description E(3) NG1E3C2T Using the latest high-voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESH™ IGBTs characterized by an outstanding performance. The “H” suffix identifies a family optimized for high-frequency applications which achieve very high switching performances (reduced tfall) while mantaining a low voltage drop. Product status link STGB6NC60HDT4 STGF6NC60HD STGP6NC60HD DS4324 - Rev 6 - October 2018 For further information contact your local STMicroelectronics sales office. www.st.com STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD Electrical ratings 1 Electrical ratings Table 1. Absolute maximum ratings Symbol VCES IC ICM (1) VGE IF Value Parameter D2PAK, Collector-emitter voltage (VGE = 0 V) 600 Continuous collector current at TC = 25 °C 15 6 Continuous collector current at TC = 100 °C 7 3 Unit V A Collector current (pulsed) 21 A Gate-emitter voltage ±20 V Diode RMS forward current at TC = 25 °C 10 A PTOT Total power dissipation at TC = 25 °C VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t = 1 s; TC = 25 °C) TSTG Storage temperature range TJ TO-220FP TO-220 62.5 25 W 2.5 kV °C -55 to 150 Operating junction temperature range °C 1. Pulse width is limited by maximum junction temperature. Table 2. Thermal data Symbol DS4324 - Rev 6 Parameter RthJC Thermal resistance junction-case RthJA Thermal resistance junction-ambient Value D2PAK, TO-220 TO-220FP 2 5 62.5 Unit °C/W °C/W page 2/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD Electrical characteristics 2 Electrical characteristics TC = 25 °C unless otherwise specified Table 3. Static characteristics Symbol Parameter Test conditions Min. V(BR)CES Collector-emitter breakdown voltage VGE = 0 V, IC = 1 mA 600 VCE(sat) Collector-emitter saturation voltage VGE(th) Gate threshold voltage ICES Collector cut-off current IGES Gate-emitter leakage current Typ. Unit V VGE = 15 V, IC = 3 A 1.9 VGE = 15 V, IC = 3 A, TC = 125 °C 1.7 VCE = VGE, IC = 250 µA Max. 2.5 3.75 V 5.75 V VGE = 0 V, VCE = 600 V 10 µA VGE = 0 V, VCE = 600 V, TC = 125 °C (1) 1 mA ±100 nA VGE = ±20 V, VCE = 0 V 1. Defined by design, not subject to production test Table 4. Dynamic characteristics Symbol Parameter Cies Input capacitance Coes Output capacitance Cres Reverse transfer capacitance Qg DS4324 - Rev 6 Test conditions VCE = 25 V, f = 1 MHz, VGE = 0 V Total gate charge Qge Gate-emitter charge Qgc Gate-collector charge ICL Turn-off SOA minimum current VCE = 390 V, IC = 3 A, VGE = 0 to 15 V (see Figure 18. Gate charge test circuit) Vclamp = 390 V, TJ = 150 °C, RG = 10 Ω, VGE = 15 V Min. Typ. Max. - 205 - - 32 - - 5.5 - - 13.6 - - 3 - - 6 - - 19 - Unit pF nC A page 3/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD Electrical characteristics Table 5. Switching characteristics (inductive load) Symbol Parameter td(on) tr Test conditions Turn-on delay time (di/dt)on Turn-on current slope tr Turn-on delay time (di/dt)on Turn-on current slope Off voltage rise time td(off) Turn-off delay time tf Off voltage rise time td(off) Turn-off delay time tf - 12 - - 5 - - 612 - - 13 - - 4.3 - - 560 - - 40 - - 76 - - 100 - - 60 - - 98 - - 124 - Min. Typ. Max. - 20 - - 68 - - 88 - - 37 - - 93 - - 130 - Min. Typ. Max. If = 1.5 A - 1.6 2.1 If = 1.5 A, Tj = 125 °C - 1.3 - 21 ns - 14 nC - 1.36 A - 34 ns - 32 nC - 1.88 A VCC = 390 V, IC = 3 A, RG = 10 Ω, VGE = 15 V (see Figure 17. Test circuit for inductive load switching) Current fall time tr(Voff) Max. VCC = 390 V, IC = 3 A, RG = 10 Ω, VGE = 15 V, TJ = 125 °C (see Figure 17. Test circuit for inductive load switching) Current rise time tr(Voff) Typ. VCC = 390 V, IC = 3 A, RG = 10 Ω, VGE = 15 V (see Figure 17. Test circuit for inductive load switching) Current rise time td(on) Min. VCC = 390 V, IC = 3 A, RG = 10 Ω, VGE = 15 V, TJ = 125 °C (see Figure 17. Test circuit for inductive load switching) Current fall time Unit ns A/µs ns A/µs ns ns Table 6. Switching energy (inductive load) Symbol Parameter Eon (1) Turn-on switching energy (2) Turn-off switching energy Eoff Ets Total switching energy Eon (1) Turn-on switching energy (2) Turn-off switching energy Eoff Ets Total switching energy Test conditions VCC = 390 V, IC = 3 A, RG = 10 Ω, VGE = 15 V (see )Figure 17. Test circuit for inductive load switching VCC = 390 V, IC = 3 A, RG = 10 Ω, VGE = 15 V, TJ = 125 °C (see )Figure 17. Test circuit for inductive load switching Unit µJ µJ 1. Including the reverse recovery of the diode 2. Including the tail of the collector current Table 7. Collector-emitter diode Symbol Parameter DS4324 - Rev 6 Vf Forward on-voltage trr Reverse recovery time Qrr Reverse recovery charge Irrm Reverse recovery current trr Reverse recovery time Qrr Reverse recovery charge Irrm Reverse recovery current Test conditions If = 3 A ,VR = 40 V, di/dt = 100 A/μs (see Figure 20. Diode reverse recovery waveform) If = 3 A ,VR = 40 V, Tj = 125 °C, di/dt = 100 A/μs (see Figure 20. Diode reverse recovery waveform) Unit V page 4/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD Electrical characteristics (curves) 2.1 Electrical characteristics (curves) Figure 1. Output characteristics Figure 2. Transfer characteristics Figure 3. Transconductance Figure 4. Collector-emitter on-voltage vs temperature VCE(sat) (V) 4.5 3.6 2.7 1.8 0.9 0 -100 Figure 5. Gate charge vs gate-source voltage 0 -50 50 100 150 Figure 6. Capacitance variations Cies Coes Cres DS4324 - Rev 6 page 5/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD Electrical characteristics (curves) Figure 7. Normalized gate threshold voltage vs temperature Figure 8. Collector-emitter on voltage vs collector current Figure 9. Normalized breakdown voltage vs temperature Figure 10. Switching energy vs temperature Figure 11. Switching energy vs gate resistance Figure 12. Switching energy vs collector current DS4324 - Rev 6 page 6/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD Electrical characteristics (curves) Figure 13. Thermal impedance for TO-220 / D2PAK Figure 15. Thermal impedance for TO-220FP Figure 14. Turn-off SOA Figure 16. Emitter-collector diode characteristics * DS4324 - Rev 6 page 7/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD Test circuits 3 Test circuits Figure 17. Test circuit for inductive load switching C A Figure 18. Gate charge test circuit A k L=100 µH G E B B 3.3 µF C G + k RG 1000 µF VCC k D.U.T k E k k AM01505v1 AM01504v1 Figure 20. Diode reverse recovery waveform Figure 19. Switching waveform 90% 10% VG 90% VCE 10% Tr(Voff) Tcross 25 90% IC Td(on) Ton 10% Td(off) Tr(Ion) Tf Toff AM01506v1 DS4324 - Rev 6 page 8/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DS4324 - Rev 6 page 9/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD DPAK (TO-252) type A package information 4.1 D²PAK (TO-263) type A package information Figure 21. DPAK (TO-252) type A package outline 0068772_A_25 DS4324 - Rev 6 page 10/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD DPAK (TO-252) type A package information Table 8. DPAK (TO-252) type A mechanical data Dim. mm Min. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 4.95 E 6.40 E1 4.60 4.70 4.80 e 2.159 2.286 2.413 e1 4.445 4.572 4.699 H 9.35 10.10 L 1.00 1.50 (L1) 2.60 2.80 3.00 L2 0.65 0.80 0.95 L4 0.60 R V2 DS4324 - Rev 6 Typ. 5.10 5.25 6.60 1.00 0.20 0° 8° page 11/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD D²PAK (TO-263) type B package information 4.2 D²PAK (TO-263) type B package information Figure 22. D²PAK (TO-263) type B package outline 0079457_25_B DS4324 - Rev 6 page 12/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD D²PAK (TO-263) type B package information Table 9. D²PAK (TO-263) type B mechanical data Dim. mm Min. Max. A 4.36 4.56 A1 0 0.25 b 0.70 0.90 b1 0.51 0.89 b2 1.17 1.37 b3 1.36 1.46 c 0.38 0.694 c1 0.38 0.534 c2 1.19 1.34 D 8.60 9.00 D1 6.90 7.50 E 10.15 10.55 E1 8.10 8.70 e 2.54 BSC H 15.00 15.60 L 1.90 2.50 L1 1.65 L2 1.78 L3 L4 DS4324 - Rev 6 Typ. 0.25 4.78 5.28 page 13/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD D²PAK (TO-263) type B package information Figure 23. D²PAK (TO-263) recommended footprint (dimensions are in mm) Footprint DS4324 - Rev 6 page 14/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD D²PAK (TO-263) type B package information 4.2.1 Packing information Figure 24. D²PAK tape outline DS4324 - Rev 6 page 15/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD D²PAK (TO-263) type B package information Figure 25. D²PAK reel outline T 40mm min. access hole at slot location B D C N A G measured at hub Tape slot in core for tape start 2.5mm min.width Full radius AM06038v1 Table 10. D²PAK tape and reel mechanical data Tape Dim. DS4324 - Rev 6 Reel mm mm Dim. Min. Max. Min. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T Max. 330 13.2 26.4 30.4 P0 3.9 4.1 P1 11.9 12.1 Base quantity 1000 P2 1.9 2.1 Bulk quantity 1000 R 50 T 0.25 0.35 W 23.7 24.3 page 16/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD TO-220FP package information 4.3 TO-220FP package information Figure 26. TO-220FP package outline 7012510_Rev_12_B DS4324 - Rev 6 page 17/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD TO-220FP package information Table 11. TO-220FP package mechanical data Dim. mm Min. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 DS4324 - Rev 6 Typ. 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 page 18/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD TO-220 type A package information 4.4 TO-220 type A package information Figure 27. TO-220 type A package outline 0015988_typeA_Rev_22 DS4324 - Rev 6 page 19/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD TO-220 type A package information Table 12. TO-220 type A package mechanical data Dim. mm Min. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 15.75 D1 DS4324 - Rev 6 Typ. 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 øP 3.75 3.85 Q 2.65 2.95 page 20/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD Ordering information 5 Ordering information Table 13. Ordering information DS4324 - Rev 6 Order code Marking Package Packing STGB6NC60HDT4 GB6NC60HD D²PAK Tape and reel STGF6NC60HD GF6NC60HD TO-220FP Tube STGP6NC60HD GP6NC60HD TO-220 Tube page 21/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD Revision history Table 14. Document revision history Date Revision Changes 28-Nov-2005 1 First release 07-Mar-2006 2 Complete version 31-Jul-2006 3 Modified Figure 10. 26-Apr-2007 4 Inserted package I2PAK Part number STGB6NC60HD-1 has been moved to a separate datasheet. Updated information on cover page. 20-Nov-2017 5 Updated Table 2: "Absolute maximum ratings" and Table 4: "Static characteristics". Updated Section 2.1: "Electrical characteristics (curves)". Updated Section 4: "Package information". Minor text changes 23-Oct-2018 6 Updated title in coverpage and Table 4. Dynamic characteristics. Minor text changes. DS4324 - Rev 6 page 22/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD Contents Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 4.1 D²PAK (TO-263) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.2 D²PAK (TO-263) type B package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.2.1 5 Packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.3 TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.4 TO-220 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 DS4324 - Rev 6 page 23/24 STGB6NC60HDT4, STGF6NC60HD, STGP6NC60HD IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved DS4324 - Rev 6 page 24/24