STGP10NB60S

STGB10NB60S STGP10NB60S 16 A, 600 V, low drop IGBT Features ■ Low on-voltage drop (VCE(sat)) ■ High current capability TAB TAB Applications ■ Light dimmer ■ Static relays ■ Motor drive 3 3 1 TO-220 1 2 D2PAK Description This IGBT utilizes the advanced PowerMESH™ process featuring extremely low on-state voltage drop in low-frequency working conditions (up to 1 kHz). Table 1. Figure 1. Internal schematic diagram Device summary Order codes Marking Package Packaging STGB10NB60ST4 GB10NB60S D2PAK Tape and reel STGP10NB60S GP10NB60S TO-220 Tube September 2011 Doc ID 10985 Rev 4 1/19 www.st.com 19 Contents STGB10NB60S, STGP10NB60S Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2/19 ............................................... 9 Doc ID 10985 Rev 4 STGB10NB60S, STGP10NB60S 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Value Unit VCES Collector-emitter voltage (VGE = 0) 600 V IC (1) Continuous collector current at TC = 25 °C 29 A IC (1) Continuous collector current at TC = 100 °C 16 A ICL (2) Turn-off latching current 20 A (3) Pulsed collector current 80 A ± 20 V ICP 1. Parameter VGE Gate-emitter voltage PTOT Total dissipation at TC = 25 °C 80 W Tj Operating junction temperature – 55 to 150 °C Calculated according to the iterative formula T j ( max ) – T C I C ( T C ) = ------------------------------------------------------------------------------------------------------R thj – c × V CE ( sat ) ( max ) ( T j ( max ), I C ( T C ) ) 2. Vclamp = 80% of VCES, Tj =150 °C, RG=1kΩ, VGE=15 V 3. Pulse width limited by maximum junction temperature and turn-off within RBSOA Table 3. Symbol Thermal data Parameter Value Unit Rthj-case Thermal resistance junction-case 1.56 °C/W Rthj-amb Thermal resistance junction-ambient 62.5 °C/W Doc ID 10985 Rev 4 3/19 Electrical characteristics 2 STGB10NB60S, STGP10NB60S Electrical characteristics (Tj =25 °C unless otherwise specified) Table 4. Symbol Static Parameter Test conditions Min. Typ. Max. Unit V(BR)CES Collector-emitter breakdown IC= 250 µA voltage (VGE= 0) 600 V V(BR)ECS Emitter-collector breakdown IC= 1 mA voltage (VGE= 0) 20 V IGES Gate-emitter leakage current (VCE = 0) VGE= ±20 V ±100 nA ICES Collector cut-off current (VGE = 0) VCE= 600 V VCE= 600 V, Tj= 125 °C 10 100 µA µA VGE(th) Gate threshold voltage VCE= VGE, IC= 250 µA 5 V VCE(sat) Collector-emitter saturation voltage VGE= 15 V, IC= 5 A VGE= 15 V, IC= 10 A VGE= 15 V, IC= 10 A, Tj= 125 °C gfs (1) Forward transconductance 2.5 1.15 1.35 1.75 V 1.25 VCE = 15 V , IC = 10 A 5 S 1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5% Table 5. Symbol Cies Coes Cres Qg 4/19 Dynamic Parameter Test conditions Min. Typ. Max. Unit Input capacitance Output capacitance Reverse transfer capacitance VCE = 25 V, f = 1 MHz, VGE= 0 - 610 65 12 - pF pF pF Total gate charge VCE = 400 V, IC = 10 A, VGE = 15 V (see Figure 17) - 33 - nC Doc ID 10985 Rev 4 STGB10NB60S, STGP10NB60S Table 6. Electrical characteristics Switching on/off (inductive load) Symbol Parameter td(on) tr (di/dt)on Turn-on delay time Current rise time Turn-on current slope tr(Voff) td(off) tf tr(Voff) td(off) tf Table 7. Symbol Eon (1) (2) Eoff Ets Eoff (2) Test conditions Min. Typ. Max. Unit VCC = 480 V, IC = 10 A RG= 1 kΩ, VGE= 15 V (see Figure 16) - 0.7 0.46 8 - µs µs A/µs Off voltage rise time Turn-off delay time Current fall time VCC = 480 V, IC = 10 A RG= 1 kΩ, VGE= 15 V (see Figure 16) - 2.2 1.2 1.2 - µs Off voltage rise time Turn-off delay time Current fall time VCC = 480 V, IC = 10 A RG= 1 kΩ, VGE= 15 V, Tj= 125 °C (see Figure 16) - 3.8 1.2 1.9 - µs Switching energy (inductive load) Parameter Test conditions Turn-on switching losses Turn-off switching losses Total switching losses VCC = 480 V, IC = 10 A RG= 1 kΩ, VGE= 15 V (see Figure 16) Turn-off switching losses VCC = 480 V, IC = 10 A RG= 1 kΩ, VGE= 15 V, Tj= 125 °C (see Figure 16) Min. Typ. Max. Unit - 0.6 5 5.6 - mJ mJ mJ - 8 - mJ 1. Eon is the turn-on losses when a typical diode is used in the test circuit. If the IGBT is offered in a package with a co-pack diode, the co-pack diode is used as external diode. IGBTs and diode are at the same temperature (25°C and 125°C). 2. Turn-off losses include also the tail of the collector current. Doc ID 10985 Rev 4 5/19 Electrical characteristics STGB10NB60S, STGP10NB60S 2.1 Electrical characteristics (curves) Figure 2. Output characteristics Figure 3. Transfer characteristics Figure 4. Transconductance Figure 5. Collector-emitter on voltage vs. temperature Figure 6. Collector-emitter on voltage vs. collector current Figure 7. Normalized gate threshold vs. temperature 6/19 Doc ID 10985 Rev 4 STGB10NB60S, STGP10NB60S Figure 8. Electrical characteristics Normalized breakdown voltage vs. temperature Figure 9. Gate charge vs. gate-emitter voltage Figure 10. Capacitance variations Figure 11. Switching losses vs. temperature Figure 12. Switching losses vs. gate resistance Figure 13. Switching losses vs. collector current Doc ID 10985 Rev 4 7/19 Electrical characteristics STGB10NB60S, STGP10NB60S Figure 14. Thermal impedance for TO-220 and D2PAK 8/19 Figure 15. Turn-off SOA Doc ID 10985 Rev 4 STGB10NB60S, STGP10NB60S 3 Test circuits Test circuits Figure 16. Test circuit for inductive load switching Figure 17. Gate charge test circuit Figure 18. Switching waveforms Doc ID 10985 Rev 4 9/19 Package mechanical data 4 STGB10NB60S, STGP10NB60S Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 10/19 Doc ID 10985 Rev 4 STGB10NB60S, STGP10NB60S Table 8. Package mechanical data D²PAK (TO-263) mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 E 10 E1 8.50 10.40 e 2.54 e1 4.88 5.28 H 15 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R V2 0.4 0° 8° Doc ID 10985 Rev 4 11/19 Package mechanical data STGB10NB60S, STGP10NB60S Figure 19. D²PAK (TO-263) drawing 0079457_S 12/19 Doc ID 10985 Rev 4 STGB10NB60S, STGP10NB60S Table 9. Package mechanical data TO-220 type A mechanical data mm. Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 ∅P 3.75 3.85 Q 2.65 2.95 Doc ID 10985 Rev 4 13/19 Package mechanical data STGB10NB60S, STGP10NB60S Figure 20. TO-220 type A drawing 0015988_typeA_Rev_S 14/19 Doc ID 10985 Rev 4 STGB10NB60S, STGP10NB60S 5 Packaging mechanical data Packaging mechanical data Table 10. D²PAK (TO-263) tape and reel mechanical data Tape Reel mm. mm. Dim. Dim. Min. Max. Min. Max. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base qty 1000 P2 1.9 2.1 Bulk qty 1000 R 50 T 0.25 0.35 W 23.7 24.3 330 13.2 26.4 30.4 Figure 21. D²PAK footprint (a) 16.90 12.20 5.08 1.60 3.50 9.75 Doc ID 10985 Rev 4 Footprint 15/19 Packaging mechanical data STGB10NB60S, STGP10NB60S Figure 22. Tape 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F K0 W B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v2 a. All dimension are in millimeters. 16/19 Doc ID 10985 Rev 4 STGB10NB60S, STGP10NB60S Packaging mechanical data Figure 23. Reel T REEL DIMENSIONS 40mm min. Access hole At sl ot location B D C N A Full radius Tape slot in core for tape start 25 mm min. width G measured at hub AM08851v2 Doc ID 10985 Rev 4 17/19 Revision history 6 STGB10NB60S, STGP10NB60S Revision history Table 11. Document revision history Date Revision 10-Nov-2004 1 New release. 28-Feb-2005 2 Some values changed in Table 4: Static. 16-Dec-2010 3 Updated Table 2: Absolute maximum ratings. Updated mechanical data Section 4: Package mechanical data. 4 Modified: unit value Table 7 on page 5, Figure 2 and Figure 3 on page 6. Updated mechanical data D²PAK Table 8 on page 11 and Figure 19 on page 12. Removed order code STGP10NB60SFP and TO-220FP package mechanical data. 27-Sep-2011 18/19 Changes Doc ID 10985 Rev 4 STGB10NB60S, STGP10NB60S Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 10985 Rev 4 19/19