STGP4M65DF2

STGP4M65DF2 Trench gate field-stop IGBT, M series 650 V, 4 A low loss Datasheet - production data Features       TAB 1 2 3 6 µs of short-circuit withstand time VCE(sat) = 1.6 V (typ.) @ IC = 4 A Tight parameter distribution Safer paralleling Low thermal resistance Soft and very fast recovery antiparallel diode Applications TO-220    Figure 1: Internal schematic diagram Motor control UPS PFC Description This device is an IGBT developed using an advanced proprietary trench gate field-stop structure. The device is part of the M series IGBTs, which represent an optimal balance between inverter system performance and efficiency where low-loss and short-circuit functionality are essential. Furthermore, the positive VCE(sat) temperature coefficient and tight parameter distribution result in safer paralleling operation. Table 1: Device summary Order code Marking Package Packing STGP4M65DF2 G4M65DF2 TO-220 Tube November 2016 DocID028671 Rev 3 This is information on a product in full production. 1/16 www.st.com Contents STGP4M65DF2 Contents 1 Electrical ratings ............................................................................. 3 2 Electrical characteristics ................................................................ 4 2.1 Electrical characteristics (curves) ...................................................... 6 3 Test circuits ................................................................................... 11 4 Package information ..................................................................... 12 4.1 5 2/16 TO-220 type A package information ................................................ 13 Revision history ............................................................................ 15 DocID028671 Rev 3 STGP4M65DF2 1 Electrical ratings Electrical ratings Table 2: Absolute maximum ratings Symbol VCES IC Parameter Collector-emitter voltage (VGE = 0 V) Value Unit 650 V Continuous collector current at TC = 25 °C 8 A Continuous collector current at TC = 100 °C 4 A ICP(1) Pulsed collector current 16 A VGE Gate-emitter voltage ±20 V Continuous forward current at TC = 25 °C 8 A IF Continuous forward current at TC = 100 °C 4 A IFP(1) Pulsed forward current 16 A PTOT Total dissipation at TC = 25 °C 68 W TSTG Storage temperature range - 55 to 150 °C Operating junction temperature range - 55 to 175 °C Value Unit TJ Notes: (1)Pulse width limited by maximum junction temperature. Table 3: Thermal data Symbol Parameter RthJC Thermal resistance junction-case IGBT 2.2 °C/W RthJC Thermal resistance junction-case diode 5 °C/W RthJA Thermal resistance junction-ambient 62.5 °C/W DocID028671 Rev 3 3/16 Electrical characteristics 2 STGP4M65DF2 Electrical characteristics TC = 25 °C unless otherwise specified Table 4: Static characteristics Symbol Parameter V(BR)CES Collector-emitter breakdown voltage VCE(sat) VF Test conditions Collector-emitter saturation voltage Forward on-voltage VGE = 0 V, IC = 250 µA Min. Typ. 650 1.6 VGE = 15 V, IC = 4 A, TJ = 125 °C 1.9 VGE = 15 V, IC = 4 A, TJ = 175 °C 2.1 IF = 4 A 1.9 IF = 4 A, TJ = 125 °C 1.7 IF = 4 A, TJ = 175 °C 1.6 Gate threshold voltage VCE = VGE, IC = 250 µA ICES Collector cut-off current IGES Gate-emitter leakage current 5 Unit V VGE = 15 V, IC = 4 A VGE(th) Max. 6 2.1 V V 7 V VGE = 0 V, VCE = 650 V 25 µA VCE = 0 V, VGE = ± 20 V ±250 µA Unit Table 5: Dynamic characteristics Symbol 4/16 Parameter Test conditions Cies Input capacitance Coes Output capacitance Cres Reverse transfer capacitance Qg Total gate charge Qge Gate-emitter charge Qgc Gate-collector charge VCE= 25 V, f = 1 MHz, VGE = 0 V VCC = 520 V, IC = 4 A, VGE = 15 V (see Figure 30: " Gate charge test circuit") DocID028671 Rev 3 Min. Typ. Max. - 369 - - 24.8 - - 8 - - 15.2 - - 3 - - 7 - pF nC STGP4M65DF2 Electrical characteristics Table 6: IGBT switching characteristics (inductive load) Symbol td(on) tr (di/dt)on td(off) tf Parameter Test conditions Typ. Max. Unit Turn-on delay time 12 - ns Current rise time 6.9 - ns 480 - A/µs Turn-on current slope Turn-off-delay time Current fall time Min. VCE = 400 V, IC = 4 A, VGE = 15 V, RG = 47 Ω (see Figure 29: " Test circuit for inductive load switching") 86 - ns 120 - ns 0.040 - mJ Eon(1) Turn-on switching energy (2) Turn-off switching energy 0.136 - mJ Total switching energy 0.176 - mJ Turn-on delay time 11.6 - ns 8 - ns 410 - A/µs Eoff Ets td(on) tr Current rise time (di/dt)on td(off) tf Turn-on current slope Turn-off-delay time Current fall time VCE = 400 V, IC = 4 A, VGE = 15 V, RG = 47 Ω, TJ = 175 °C (see Figure 29: " Test circuit for inductive load switching") 85 - ns 211 - ns 0.067 - mJ Eon(1) Turn-on switching energy (2) Turn-off switching energy 0.210 - mJ Total switching energy 0.277 - mJ Eoff Ets tsc Short-circuit withstand time VCC ≤ 400 V, VGE = 15 V, TJstart = 150 °C 6 - µs VCC ≤ 400 V, VGE = 13 V, TJstart = 150 °C 10 - µs Notes: (1)Including the reverse recovery of the diode. (2)Including the tail of the collector current. Table 7: Diode switching characteristics (inductive load) Symbol Parameter Test conditions trr Reverse recovery time Qrr Reverse recovery charge Irrm Reverse recovery current dIrr/dt Peak rate of fall of reverse recovery current during tb Err Reverse recovery energy trr Reverse recovery time Qrr Reverse recovery charge Irrm Reverse recovery current dIrr/dt Peak rate of fall of reverse recovery current during tb Err Reverse recovery energy IF = 4 A, VR = 400 V, VGE = 15 V, di/dt = 800 A/µs (see Figure 29: " Test circuit for inductive load switching") IF = 4 A, VR = 400 V, VGE = 15 V, TJ = 175 °C, di/dt = 800 A/µs (see Figure 29: " Test circuit for inductive load switching") DocID028671 Rev 3 Min. Typ. Max. Unit - 133 - ns - 140 - nC - 5 - A - 520 - A/µs - 15 - µJ - 236 - ns - 370 - nC - 6.6 - A - 378 - A/µs - 32 - µJ 5/16 Electrical characteristics 2.1 6/16 STGP4M65DF2 Electrical characteristics (curves) Figure 2: Power dissipation vs. case temperature Figure 3: Collector current vs. case temperature Figure 4: Output characteristics (TJ = 25 °C) Figure 5: Output characteristics (TJ = 175 °C) Figure 6: VCE(sat) vs. junction temperature Figure 7: VCE(sat) vs. collector current DocID028671 Rev 3 STGP4M65DF2 Electrical characteristics Figure 8: Collector current vs. switching frequency Figure 9: Forward bias safe operating area Figure 10: Transfer characteristics Figure 11: Diode VF vs. forward current Figure 12: Normalized VGE(th) vs. junction temperature Figure 13: Normalized V(BR)CES vs. junction temperature DocID028671 Rev 3 7/16 Electrical characteristics 8/16 STGP4M65DF2 Figure 14: Capacitance variations Figure 15: Gate charge vs. gate-emitter voltage Figure 16: Switching energy vs. collector current Figure 17: Switching energy vs. gate resistance Figure 18: Switching energy vs. temperature Figure 19: Switching energy vs. collector emitter voltage DocID028671 Rev 3 STGP4M65DF2 Electrical characteristics Figure 20: Short-circuit time and current vs. VGE Figure 21: Switching times vs. collector current Figure 22: Switching times vs. gate resistance Figure 23: Reverse recovery current vs. diode current slope Figure 24: Reverse recovery time vs. diode current slope Figure 25: Reverse recovery charge vs. diode current slope Qrr IGBT170320161123RRQ (nC) VCC= 400 V, VGE= 15 V, IF= 4 A, Tj= 175 °C 370 365 360 355 350 0 DocID028671 Rev 3 150 300 450 600 750 di/dt (A/µs) 9/16 Electrical characteristics STGP4M65DF2 Figure 26: Reverse recovery energy vs. diode current slope Figure 27: Thermal impedance for IGBT ZthTO2T_B K δ=0.5 0.2 0.1 10 0.05 -1 0.02 Zth=k Rthj-c δ=tp/t 0.01 Single pulse tp t -2 10 -5 10 10 -4 10 -3 10 -2 10 -1 tp (s) Figure 28: Thermal impedance for diode CG20930 K δ = 0.5 δ = 0.2 δ = 0.1 -1 10 Z Zthth == kk R Rthj-C thj-C δδ == ttp // Ƭ Ƭ p δ = 0.05 δ = 0.02 δ = 0.01 tp SINGLE PULSE ƬƬ -2 10 10/16 10-5 10-4 10-3 10-2 DocID028671 Rev 3 10-1 tp(s) STGP4M65DF2 3 Test circuits Test circuits Figure 29: Test circuit for inductive load switching C A Figure 30: Gate charge test circuit A L=100 µH G E B B 3.3 µF C G + RG VCC 1000 µF D.U.T E - AM01504v 1 Figure 31: Switching waveform Figure 32: Diode reverse recovery waveform di/dt Qrr trr IF ts tf t IRRM 10% IRRM VRRM dv/dt AM01507v1 DocID028671 Rev 3 11/16 Package information 4 STGP4M65DF2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 12/16 DocID028671 Rev 3 STGP4M65DF2 4.1 Package information TO-220 type A package information Figure 33: TO-220 type A package outline DocID028671 Rev 3 13/16 Package information STGP4M65DF2 Table 8: TO-220 type A mechanical data mm Dim. Min. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 15.75 D1 14/16 Typ. 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 øP 3.75 3.85 Q 2.65 2.95 DocID028671 Rev 3 STGP4M65DF2 5 Revision history Revision history Table 9: Document revision history Date 25-Nov-2015 30-Mar-2016 21-Nov-2016 Revision Changes 1 First release. 2 Modified: features in cover page Datasheet promoted from preliminary data to production data Modified: Table 2: "Absolute maximum ratings", Table 4: "Static characteristics", Table 5: "Dynamic characteristics", Table 6: "IGBT switching characteristics (inductive load)" and Table 7: "Diode switching characteristics (inductive load)" Added: Section 2.1: "Electrical characteristics (curves)" Minor text changes 3 Updated Table 2: "Absolute maximum ratings" Updated Table 6: "IGBT switching characteristics (inductive load)" Updated Figure 25: "Reverse recovery charge vs. diode current slope" Minor text changes DocID028671 Rev 3 15/16 STGP4M65DF2 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved 16/16 DocID028671 Rev 3