STGW35HF60WDI

STGW35HF60WDI 35 A, 600 V ultrafast IGBT with low drop diode Features ■ Improved Eoff at elevated temperature ■ Low CRES / CIES ratio (no cross-conduction susceptibility) ■ Low VF soft recovery antiparallel diode Applications 2 3 1 ■ Welding ■ Induction heating ■ Resonant converters TO-247 Description This ultrafast IGBT is developed using a new planar technology to yield a device with tighter switching energy variation (Eoff) versus temperature. The suffix "W" denotes a subset of products designed for high switching frequency operation (over 100 kHz). Table 1. Figure 1. Internal schematic diagram Device summary Order code Marking Package STGW35HF60WDI GW35HF60WDI TO-247 STGWA35HF60WDI 35HF60WDI TO-247 long leads Packaging Tube August 2011 Doc ID 16090 Rev 3 1/15 www.st.com 15 Contents STGW35HF60WDI Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Electrical characteristics (curves) .............................. 5 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/15 ............................................... 8 Doc ID 16090 Rev 3 STGW35HF60WDI 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter Unit TO-247 VCES IC (1) IC (1) Collector-emitter voltage (VGE = 0) 600 V Continuous collector current at TC = 25 °C 60 70 A Continuous collector current at TC = 100 °C 35 40 A ICL (2) Turn-off latching current 80 A ICP (3) Pulsed collector current 150 A Gate-emitter voltage ± 20 V Diode RMS forward current at TC = 25 °C 30 A IFSM Surge non repetitive forward current tp= 10 ms sinusoidal 130 A PTOT Total dissipation at TC = 25 °C Tstg Storage temperature VGE IF Tj 1. TO-247 long leads 200 260 – 55 to 150 W °C Operating junction temperature Calculated according to the iterative formula: T j ( max ) – T C I C ( T C ) = --------------------------------------------------------------------------------------------------------R thj – c × V CE ( sat ) ( max ) ( T j ( max ), I C ( T C ) ) 2. Pulse width limited by maximum junction temperature and turn-off within RBSOA 3. VCLAMP = 80% (VCES), VGE = 15 V, RG = 10 Ω, TJ = 150 °C Table 3. Thermal data Value Symbol Parameter Thermal resistance junction-case IGBT Rthj-case Rthj-amb Unit TO-247 TO-247 long leads 0.63 0.48 °C/W Thermal resistance junction-case diode 1.5 °C/W Thermal resistance junction-ambient 50 °C/W Doc ID 16090 Rev 3 3/15 Electrical characteristics 2 STGW35HF60WDI Electrical characteristics (TJ = 25 °C unless otherwise specified) Table 4. Symbol Static Parameter Test conditions Collector-emitter V(BR)CES breakdown voltage (VGE = 0) IC = 1 mA Collector-emitter saturation VGE = 15 V, IC= 20 A voltage VGE = 15V, IC = 20 A,TJ= 125 °C VGE(th) Gate threshold voltage VCE = VGE, IC = 1 mA ICES Collector cut-off current (VGE = 0) VCE = 600 V VCE = 600 V, TJ = 125 °C IGES Gate-emitter leakage current (VCE = 0) VGE = ±20 V Forward transconductance VCE = 15 V, IC = 20 A Table 5. Symbol Typ. Max. Unit 600 VCE(sat) gfs V 1.9 1.65 3.75 2.5 V V 5.75 V 250 1 µA mA ± 100 nA 15 S Dynamic Parameter Test conditions Min. Typ. Max. Unit Cies Coes Cres Input capacitance Output capacitance Reverse transfer capacitance VCE = 25 V, f = 1 MHz, VGE = 0 - 2400 235 50 - pF pF pF Qg Qge Qgc Total gate charge Gate-emitter charge Gate-collector charge VCE = 390 V, IC = 20 A, VGE = 15 V, (see Figure 17) - 140 13 52 - nC nC nC Table 6. Symbol 4/15 Min. Switching on/off (inductive load) Parameter Test conditions Min. Typ. Max. Unit td(on) tr (di/dt)on Turn-on delay time Current rise time Turn-on current slope VCC = 390 V, IC = 20 A RG = 10 Ω, VGE = 15 V, (see Figure 16) - 30 15 1650 - ns ns A/µs td(on) tr (di/dt)on Turn-on delay time Current rise time Turn-on current slope VCC = 390 V, IC = 20 A RG = 10 Ω, VGE = 15 V, TJ = 125 °C (see Figure 16) - 30 15 1600 - ns ns A/µs Doc ID 16090 Rev 3 STGW35HF60WDI Table 6. Electrical characteristics Switching on/off (inductive load) tr(Voff) td(off) tf Off voltage rise time Turn-off delay time Current fall time VCC = 390 V, IC = 20 A, RGE = 10 Ω, VGE = 15 V (see Figure 16) tr(Voff) td(off) tf Off voltage rise time Turn-off delay time Current fall time VCC = 390 V, IC = 20 A, RGE = 10 Ω, VGE =15 V, TJ = 125 °C (see Figure 16) Table 7. Symbol - 30 175 40 - ns ns ns - 50 225 70 - ns ns ns Min. Typ. Max. Unit - 185 Switching energy (inductive load) Parameter Test conditions Eoff Turn-off switching losses VCC = 390 V, IC = 20 A RG = 10 Ω, VGE = 15 V, (see Figure 18) Eoff Turn-off switching losses VCC = 390 V, IC = 20 A RG = 10 Ω, VGE = 15 V, TJ = 125 °C, (see Figure 18) - 350 530 µJ Parameter Test conditions Min. Typ. Max. Unit VF Forward on-voltage IF = 20 A IF = 20 A, TJ = 125 °C - 1.3 1.1 1.7 V V trr Qrr Irrm Reverse recovery time Reverse recovery charge Reverse recovery current IF = 20 A,VR = 50 V, di/dt = 100 A/µs (see Figure 19) - 85 240 5.2 - ns nC A trr Qrr Irrm Reverse recovery time Reverse recovery charge Reverse recovery current TJ =125 °C, di/dt = 100 A/µs - 230 930 8.7 - ns nC A Table 8. Symbol µJ Collector-emitter diode IF = 20 A,VR = 50 V, (see Figure 19) Doc ID 16090 Rev 3 5/15 Electrical characteristics STGW35HF60WDI 2.1 Electrical characteristics (curves) Figure 2. Output characteristics Figure 3. AM10147V1 IC200 (A) V GE = 15 V 11 V Transfer characteristics AM10148V1 (A) 10 V VCE = 10 V 150 150 9V 100 100 8V 50 50 7V V GE = 6 V 0 0 0 Figure 4. 2 4 6 V CE 10 (V) 8 Normalized VCE(sat) vs. IC 1.4 3 Figure 5. AM10149V1 1.6 V CE(sat) (norm) 0 6 V GE (V) 12 9 Normalized VCE(sat) vs. temperature AM10150V1 1.6 V CE(sat) (norm) V GE = 15 V IC = 80 A 1.4 T J = -50 ºC T J = 25 ºC 1.2 IC = 60 A 1.2 T J = 150 ºC 1 10 A IC = 40 A 30 A 1 0.8 IC = 5 A 0.6 20 A 0.8 V GE = 15 V 0.4 0.6 0 Figure 6. 20 40 60 80 IC (A) Normalized breakdown voltage vs. temperature AM10151V1 1.1 V CES (norm) -50 Figure 7. 0 50 100 T J 150 (°C) Normalized gate threshold voltage vs. temperature AM10152V1 1.2 V GE(th) (norm) 1.1 1.05 1 1 0.9 0.8 IC = 1 mA 0.95 V GE = V CE 0.7 0.9 -50 6/15 0 50 100 T J150 (°C) IC = 250 µA 0.6 Doc ID 16090 Rev 3 -50 0 50 100 T J150 (°C) STGW35HF60WDI Figure 8. Electrical characteristics Gate charge vs. gate-emitter voltage AM10153V1 16 V GE (V) V CC = 400 V 12 Figure 9. Capacitance variations AM10154V1 C5000 (pF) f = 1 MHz V GE = 0 4000 IC = 20 A 3000 C ies 8 2000 4 1000 C oes C res 0 0 0 30 60 90 120 Q G150 (nC) Figure 10. Switching losses vs temperature AM10157V1 450 E (µJ) 0 10 20 30 40 V CE 50 (V) Figure 11. Switching losses vs gate resistance AM10158V1 E2000 (µJ) 400 E OFF 1500 350 E OFF 300 1000 250 V CE = 400 V, V IC = 20 A, R 200 GE = 15 V G V CE = 400 V, V 500 IC = 20 A, T =10 Ω 150 J GE = 15 V = 125 °C 0 25 50 75 T J125 (°C) 100 Figure 12. Switching losses vs collector current 0 120 180 R240 g (Ω) Figure 13. Diode forward on voltage AM10159V1 E1000 (µJ) 60 AM10156V1 800 600 E OF F 400 V CE = 400 V, V 200 GE = 15 V R G = 10 Ω, T J = 125 °C 0 10 15 20 25 30 35 IC40 (A) Doc ID 16090 Rev 3 7/15 Electrical characteristics STGW35HF60WDI Figure 14. Turn-off SOA Figure 15. Thermal impedance AM10155V1 1000 IC (A) 100 10 V GE = 15 V, R G = 10 Ω T C = 150 °C 1 0.1 1 8/15 10 100 V1000 CE (V) Doc ID 16090 Rev 3 STGW35HF60WDI 3 Test circuits Test circuits Figure 16. Test circuit for inductive load switching Figure 17. Gate charge test circuit AM01504v1 Figure 18. Switching waveform AM01505v1 Figure 19. Diode recovery time waveform VG IF trr 90% VCE Qrr di/dt 90% 10% ta tb 10% Tr(Voff) t Tcross 90% IRRM IRRM IC 10% Td(off) Td(on) Tr(Ion) Ton Tf Toff VF di/dt AM01506v1 Doc ID 16090 Rev 3 AM01507v1 9/15 Package mechanical data 4 STGW35HF60WDI Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. Table 9. TO-247 mechanical data mm Dim. Min. Typ. A 4.85 5.15 A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e 5.45 L 14.20 14.80 L1 3.70 4.30 L2 18.50 ∅P 3.55 3.65 ∅R 4.50 5.50 S 10/15 Max. 5.50 Doc ID 16090 Rev 3 STGW35HF60WDI Package mechanical data Figure 20. TO-247 drawing 0075325_F Doc ID 16090 Rev 3 11/15 Package mechanical data Table 10. STGW35HF60WDI TO-247 long leads mechanical data mm Dim. Min. Typ. A 4.90 5.15 D 1.85 2.10 E 0.55 0.67 F 1.07 1.32 F1 1.90 2.38 F2 2.87 3.38 G 10.90 BSC H 15.77 16.02 L 20.82 21.07 L1 4.16 4.47 L2 5.49 5.74 L3 20.05 20.30 L4 3.68 3.93 L5 6.04 6.29 M 2.27 2.52 V 10° V1 3° V3 20° Dia. 12/15 Max. 3.55 3.66 Doc ID 16090 Rev 3 STGW35HF60WDI Package mechanical data Figure 21. TO-247 long leads drawing Doc ID 16090 Rev 3 13/15 Revision history 5 STGW35HF60WDI Revision history Table 11. 14/15 Document revision history Date Revision Changes 03-Aug-2009 1 Initial release. 02-Sep-2009 2 Minor text changes throughout the document Removed watermark. 25-Aug-2011 3 Inserted new Section 2.1: Electrical characteristics (curves). Updated Section 4: Package mechanical data. Minor text changes. Doc ID 16090 Rev 3 STGW35HF60WDI Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 16090 Rev 3 15/15