STH140N6F7-2

STF140N6F7, STH140N6F7-2, STP140N6F7 N-channel 60 V, 0.0025 Ω typ., 80 A, STripFET™ VII DeepGATE™ Power MOSFETs in TO-220FP, H2PAK-2 and TO-220 packages Datasheet - target specification Features Order codes 1 2 STH140N6F7-2 1 60 V 0.003 Ω STP140N6F7 TAB 2 RDS(on)max STF140N6F7 3 TO-220FP TAB VDS ID PTOT 72 A 30 W 80 A 110 W • 100% avalanche tested • Ultra low on-resistance 3 1 2 H PAK-2 2 3 Applications TO-220 • Switching applications Figure 1. Internal schematic diagram Description D (TAB) G (1) D(2, TAB) These devices utilize the 7th generation of design rules of ST’s proprietary STripFET™ technology, with a new gate structure. The resulting Power MOSFET exhibits the lowest RDS(on) in all packages. G(1) S (2, 3) 2 H PAK-2 S(3) TO-220FP, TO-220 AM01475v3 Table 1. Device summary Order codes Marking STF140N6F7 STH140N6F7-2 140N6F7 Package Packaging TO-220FP Tube H PAK-2 Tape and reel TO-220 Tube STP140N6F7 August 2013 2 DocID025089 Rev 1 This is preliminary information on a new product foreseen to be developed. Details are subject to change without notice. 1/18 www.st.com Contents STF140N6F7, STH140N6F7-2, STP140N6F7 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2/18 .............................................. 6 DocID025089 Rev 1 STF140N6F7, STH140N6F7-2, STP140N6F7 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter TO-220FP Unit H2PAK, TO-220 VDS Drain-source voltage 60 V VGS Gate- source voltage ±20 V ID(1) Drain current (continuous) 72 80 A Drain current (continuous) at TC = 100 °C 52 80 A Drain current (pulsed) TC = 25 °C 288 320 A PTOT Total dissipation at TC = 25 °C 30 110 W TJ Operating junction temperature -55 to 175 -55 to 175 Tstg Storage temperature ID (1) IDM (2) °C °C 1. Current limited by package. 2. Pulse width is limited by safe operating area Table 3. Thermal data Value Symbol Parameter TO-220FP Rthj-pcb(1) Thermal resistance junction-pcb max Rthj-case Thermal resistance junction-case max Rthj-amb Thermal resistance junction-ambient max H2PAK Unit TO-220 35 5 62.5 °C/W 1.36 °C/W 62.5 °C/W 1. When mounted on 1 inch² FR-4 board, 2 oz Cu DocID025089 Rev 1 3/18 18 Electrical characteristics 2 STF140N6F7, STH140N6F7-2, STP140N6F7 Electrical characteristics (TC = 25 °C unless otherwise specified) Table 4. On /off states Symbol V(BR)DSS Parameter Drain-source breakdown voltage IDSS Zero gate voltage drain current IGSS Gate-body leakage current Test conditions VGS = 0, ID = 250 µA Min. Typ. Max. 60 Unit V VGS = 0, VDS = 60 V 1 µA VGS = 0, VDS = 60 V, TC=125 °C 100 µA VDS = 0, VGS = +20 V 100 nA 4 V 0.0025 0.003 Ω Min. Typ. Max. Unit - 2700 - pF - 650 - pF - pF VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA RDS(on) Static drain-source onVGS = 10 V, ID = 40 A resistance 2 Table 5. Dynamic Symbol Parameter Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Qg Total gate charge Qgs Gate-source charge Qgd Gate-drain charge Test conditions VDS =25 V, f = 1 MHz, VGS = 0 VDD = 30 V, ID = 80 A, VGS = 10 V (see Figure 3) 25 - 40 - nC - TBD - nC - TBD - nC Min. Typ. Max. Unit - TBD - ns - TBD - ns - TBD - ns - TBD - ns Table 6. Switching times Symbol td(on) tr td(off) tf 4/18 Parameter Test conditions Turn-on delay time Rise time Turn-off delay time VDD = 30 V, ID = 40 A, RG = 4.7 Ω, VGS = 10 V (see Figure 2) Fall time DocID025089 Rev 1 STF140N6F7, STH140N6F7-2, STP140N6F7 Electrical characteristics Table 7. Source drain diode Symbol Parameter Test conditions Min. Typ. Max. Unit Source-drain current - - 80 A ISDM (1) Source-drain current (pulsed) - - 320 A VSD (2) Forward on voltage - - TBD V - - ns - - nC - - A ISD ISD = 80 A, VGS = 0 trr Reverse recovery time Qrr Reverse recovery charge IRRM Reverse recovery current ISD = 80 A, di/dt = 100 A/µs VDD = 48 V, TJ=150 °C (see Figure 4) 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%. DocID025089 Rev 1 5/18 18 Test circuits 3 STF140N6F7, STH140N6F7-2, STP140N6F7 Test circuits Figure 2. Switching times test circuit for resistive load Figure 3. Gate charge test circuit VDD 12V 47kΩ 1kΩ 100nF 3.3 μF 2200 RL μF IG=CONST VDD VGS 100Ω Vi=20V=VGMAX VD RG 2200 μF D.U.T. D.U.T. VG 2.7kΩ PW 47kΩ 1kΩ PW AM01468v1 Figure 4. Test circuit for inductive load switching and diode recovery times A A AM01469v1 Figure 5. Unclamped inductive load test circuit L A D G D.U.T. FAST DIODE B B VD L=100μH S 3.3 μF B 25 Ω 1000 μF D VDD 2200 μF 3.3 μF VDD ID G RG S Vi D.U.T. Pw AM01470v1 AM01471v1 Figure 6. Unclamped inductive waveform Figure 7. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 6/18 0 DocID025089 Rev 1 10% AM01473v1 STF140N6F7, STH140N6F7-2, STP140N6F7 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DocID025089 Rev 1 7/18 18 Package mechanical data STF140N6F7, STH140N6F7-2, STP140N6F7 Table 8. TO-220FP mechanical data mm Dim. Min. Typ. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 8/18 Max. 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 DocID025089 Rev 1 STF140N6F7, STH140N6F7-2, STP140N6F7 Package mechanical data Figure 8. TO-220FP drawing 7012510_Rev_K_B DocID025089 Rev 1 9/18 18 Package mechanical data STF140N6F7, STH140N6F7-2, STP140N6F7 Table 9. H²PAK-2 mechanical data mm Dim. Min. Typ. Max. A 4.30 4.80 A1 0.03 0.20 C 1.17 1.37 e 4.98 5.18 E 0.50 0.90 F 0.78 0.85 H 10.00 10.40 H1 7.40 7.80 - 10/18 L 15.30 15.80 L1 1.27 1.40 L2 4.93 5.23 L3 6.85 7.25 L4 1.5 1.7 M 2.6 2.9 R 0.20 0.60 V 0° 8° DocID025089 Rev 1 STF140N6F7, STH140N6F7-2, STP140N6F7 Package mechanical data Figure 9. H²PAK-2 drawing 8159712_C DocID025089 Rev 1 11/18 18 Package mechanical data STF140N6F7, STH140N6F7-2, STP140N6F7 Figure 10. H²PAK-2 recommended footprint (dimensions are in mm) 8159712_C 12/18 DocID025089 Rev 1 STF140N6F7, STH140N6F7-2, STP140N6F7 Package mechanical data Table 10. TO-220 type A mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 ∅P 3.75 3.85 Q 2.65 2.95 DocID025089 Rev 1 13/18 18 Package mechanical data STF140N6F7, STH140N6F7-2, STP140N6F7 Figure 11. TO-220 type A drawing BW\SH$B5HYB7 14/18 DocID025089 Rev 1 STF140N6F7, STH140N6F7-2, STP140N6F7 5 Packaging mechanical data Packaging mechanical data Table 11. H²PAK-2 tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base qty 1000 P2 1.9 2.1 Bulk qty 1000 R 50 T 0.25 0.35 W 23.7 24.3 DocID025089 Rev 1 Min. Max. 330 13.2 26.4 30.4 15/18 18 Packaging mechanical data STF140N6F7, STH140N6F7-2, STP140N6F7 Figure 12. Tape 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F W K0 B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v2 Figure 13. Reel T REEL DIMENSIONS 40mm min. Access hole At sl ot location B D C N A Full radius Tape slot in core for tape start 25 mm min. width G measured at hub AM08851v2 16/18 DocID025089 Rev 1 STF140N6F7, STH140N6F7-2, STP140N6F7 6 Revision history Revision history Table 12. Document revision history Date Revision 02-Aug-2013 1 Changes Initial release. DocID025089 Rev 1 17/18 18 STF140N6F7, STH140N6F7-2, STP140N6F7 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT AUTHORIZED FOR USE IN WEAPONS. NOR ARE ST PRODUCTS DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2013 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18 DocID025089 Rev 1