STH275N8F7-2AG,
STH275N8F7-6AG
Automotive-grade N-channel 80 V, 1.7 mΩ typ., 180 A,
STripFET™ F7 Power MOSFETs in H²PAK-2 and H²PAK-6
Datasheet - production data
Features
Order code
STH275N8F7-2AG
STH275N8F7-6AG
Figure 1: Internal schematic diagram
VDS
RDS(on) max.
ID
80 V
2.1 mΩ
180 A
AEC-Q101 qualified
Among the lowest RDS(on) on the market
Excellent FoM (figure of merit)
Low Crss/Ciss ratio for EMI immunity
High avalanche ruggedness
Applications
Switching applications
Description
These N-channel Power MOSFETs utilize
STripFET™ F7 technology with an enhanced
trench gate structure that results in very low onstate resistance, while also reducing internal
capacitance and gate charge for faster and more
efficient switching.
Table 1: Device summary
Order code
STH275N8F7-2AG
STH275N8F7-6AG
January 2017
Marking
275N8F7
DocID027223 Rev 4
This is information on a product in full production.
Package
H²PAK-2
H²PAK-6
Packing
Tape and reel
1/18
www.st.com
Contents
STH275N8F7-2AG, STH275N8F7-6AG
Contents
1
Electrical ratings ............................................................................. 3
2
Electrical characteristics ................................................................ 4
2.1
Electrical characteristics (curves) ...................................................... 6
3
Test circuits ..................................................................................... 8
4
Package information ....................................................................... 9
5
2/18
4.1
H²PAK-2 package information ......................................................... 10
4.2
H²PAK-6 package information ......................................................... 12
4.3
H²PAK packing information ............................................................. 15
Revision history ............................................................................ 17
DocID027223 Rev 4
STH275N8F7-2AG, STH275N8F7-6AG
1
Electrical ratings
Electrical ratings
Table 2: Absolute maximum ratings
Symbol
Parameter
Value
Unit
VDS
Drain-source voltage
80
V
VGS
Gate-source voltage
±20
V
Drain current (continuous) at TC = 25 °C
180
Drain current (continuous) at TC = 100 °C
180
IDM(2)
Drain current (pulsed)
720
A
PTOT
Total dissipation at TC = 25 °C
315
W
EAS(3)
Single pulse avalanche energy
0.775
J
-55 to 175
°C
ID(1)
Tstg
Storage temperature range
Tj
Operating junction temperature range
A
Notes:
(1)
Limited by package.
(2)
Pulse width is limited by safe operating area.
(3)
Starting Tj = 25 °C, Id = 65 A, Vdd = 50 V, Tj < Tj-max.
Table 3: Thermal data
Symbol
Parameter
Rthj-case
Thermal resistance junction-case
0.48
Thermal resistance junction-pcb
35
Rthj-pcb
(1)
Value
Unit
°C/W
Notes:
(1)
When mounted on FR-4 board of 1 inch2, 2oz Cu.
DocID027223 Rev 4
3/18
Electrical characteristics
2
STH275N8F7-2AG, STH275N8F7-6AG
Electrical characteristics
(TCASE = 25 °C unless otherwise specified)
Table 4: On/off states
Symbol
V(BR)DSS
Parameter
Test conditions
Drain-source breakdown
voltage
Min.
VGS = 0 V, ID = 1 mA
Typ.
Max.
80
Unit
V
VGS = 0 V, VDS = 80 V
1
VGS = 0 V, VDS = 80 V,
TC = 125 °C (1)
100
Gate-body leakage current
VDS = 0 V, VGS = +20 V
100
nA
VGS(th)
Gate threshold voltage
VDS = VGS, ID = 250 µA
4.5
V
RDS(on)
Static drain-source
on-resistance
VGS = 10 V, ID = 90 A
2.1
mΩ
Unit
IDSS
Zero gate voltage drain
current
IGSS
2.5
1.7
µA
Notes:
(1)
Defined by design, not subject to production test.
Table 5: Dynamic
Symbol
Parameter
Ciss
Input capacitance
Coss
Output capacitance
Crss
Reverse transfer
capacitance
Qg
Total gate charge
Qgs
Gate-source charge
Qgd
Gate-drain charge
Test conditions
VDS = 50 V, f = 1 MHz,
VGS = 0 V
VDD = 40 V, ID = 180 A,
VGS = 10 V
(see Figure 14: "Test circuit
for gate charge behavior")
Min.
Typ.
Max.
-
13600
-
-
2050
-
-
236
-
-
193
-
-
96
-
-
46
-
Min.
Typ.
Max.
-
56
-
-
180
-
-
98
-
-
42
-
pF
nC
Table 6: Switching times
Symbol
td(on)
tr
td(off)
tf
4/18
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Test conditions
VDD = 40 V, ID = 90 A
RG = 4.7 Ω, VGS = 10 V
(see Figure 18: "Switching
time waveform")
DocID027223 Rev 4
Unit
ns
STH275N8F7-2AG, STH275N8F7-6AG
Electrical characteristics
Table 7: Source-drain diode
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
ISD
Source-drain current
-
180
A
ISDM(1)
Source-drain current
(pulsed)
-
720
A
VSD(2)
Forward on voltage
-
1.2
V
trr
VGS = 0 V, ISD = 90 A
Reverse recovery time
Qrr
Reverse recovery charge
IRRM
Reverse recovery current
ISD = 180 A, di/dt = 100 A/µs,
VDD = 64 V, Tj = 150 °C
-
78
ns
-
182
nC
-
4.7
A
Notes:
(1)
Pulse width limited by safe operating area.
(2)
Pulsed: pulse duration = 300 µs, duty cycle 1.5 %.
DocID027223 Rev 4
5/18
Electrical characteristics
2.1
STH275N8F7-2AG, STH275N8F7-6AG
Electrical characteristics (curves)
Figure 2: Safe operating area
Figure 3: Thermal impedance
Figure 4: Gate charge vs gate-source voltage
Figure 5: Output characteristics
Figure 6: Transfer characteristics
Figure 7: Normalized V(BR)DSS vs temperature
6/18
DocID027223 Rev 4
STH275N8F7-2AG, STH275N8F7-6AG
Electrical characteristics
Figure 8: Static drain-source on-resistance
Figure 9: Capacitance variations
Figure 10: Source-drain diode forward characteristics
Figure 11: Normalized gate threshold voltage vs
temperature
Figure 12: Normalized on-resistance vs temperature
DocID027223 Rev 4
7/18
Test circuits
3
8/18
STH275N8F7-2AG, STH275N8F7-6AG
Test circuits
Figure 13: Test circuit for resistive load
switching times
Figure 14: Test circuit for gate charge
behavior
Figure 15: Test circuit for inductive load
switching and diode recovery times
Figure 16: Unclamped inductive load test
circuit
Figure 17: Unclamped inductive waveform
Figure 18: Switching time waveform
DocID027223 Rev 4
STH275N8F7-2AG, STH275N8F7-6AG
4
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK ®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
DocID027223 Rev 4
9/18
Package information
4.1
STH275N8F7-2AG, STH275N8F7-6AG
H²PAK-2 package information
Figure 19: H²PAK-2 package outline
10/18
DocID027223 Rev 4
STH275N8F7-2AG, STH275N8F7-6AG
Package information
Table 8: H²PAK-2 package mechanical data
mm
Dim.
Min.
Typ.
Max.
A
4.30
4.70
A1
0.03
0.20
C
1.17
1.37
e
4.98
5.18
E
0.50
0.90
F
0.78
0.85
H
10.00
10.40
H1
7.40
L
15.30
L1
1.27
1.40
L2
4.93
5.23
L3
6.85
7.25
L4
1.5
1.7
-
7.80
15.80
M
2.6
2.9
R
0.20
0.60
V
0°
8°
Figure 20: H²PAK-2 recommended footprint
DocID027223 Rev 4
11/18
Package information
4.2
STH275N8F7-2AG, STH275N8F7-6AG
H²PAK-6 package information
Figure 21: H²PAK-6 package outline
8159693_Rev_8
12/18
DocID027223 Rev 4
STH275N8F7-2AG, STH275N8F7-6AG
Package information
Table 9: H²PAK-6 package mechanical data
mm
Dim.
Min.
Typ.
Max.
A
4.30
4.70
A1
0.03
0.20
C
1.17
1.37
e
2.34
e1
4.88
5.28
e2
7.42
7.82
E
0.45
0.60
F
0.50
0.70
2.54
2.74
H
10.00
10.40
H1
7.40
7.80
L
14.75
15.25
L1
1.27
1.40
L2
4.35
4.95
L3
6.85
7.25
L4
1.50
1.75
M
1.90
2.50
R
0.20
0.60
V
0°
8°
DocID027223 Rev 4
13/18
Package information
STH275N8F7-2AG, STH275N8F7-6AG
Figure 22: H²PAK-6 recommended footprint
footprint_Rev_8
Dimensions are in mm.
14/18
DocID027223 Rev 4
STH275N8F7-2AG, STH275N8F7-6AG
4.3
Package information
H²PAK packing information
Figure 23: Tape outline
Figure 24: Reel outline
T
REE L DIMENS IONS
40 mm min.
Acc ess hole
At slot location
B
D
C
N
A
Tape slot
In core for
Full radius
G measured
At hub
Tape start
DocID027223 Rev 4
15/18
Package information
STH275N8F7-2AG, STH275N8F7-6AG
Table 10: Tape and reel mechanical data
Tape
Reel
mm
mm
Dim.
16/18
Dim.
Min.
Max.
A0
10.5
10.7
A
B0
15.7
15.9
B
1.5
D
1.5
1.6
C
12.8
D1
1.59
1.61
D
20.2
E
1.65
1.85
G
24.4
F
11.4
11.6
N
100
K0
4.8
5.0
T
P0
3.9
4.1
P1
11.9
12.1
Base quantity
1000
P2
1.9
2.1
Bulk quantity
1000
R
50
T
0.25
0.35
W
23.7
24.3
DocID027223 Rev 4
Min.
Max.
330
13.2
26.4
30.4
STH275N8F7-2AG, STH275N8F7-6AG
5
Revision history
Revision history
Table 11: Document revision history
Date
Revision
27-Nov-2014
1
First release.
05-Mar-2015
2
Document status promoted from preliminary to production data.
Updated title and feature in cover page.
10-Mar-2016
3
Updated Table 4. Minor text changes.
4
Updated title and features in cover page.
Updated Table 2: "Absolute maximum ratings" , Table 4: "On/off
states" and Table 6: "Switching times".
Minor text changes.
10-Jan-2017
Changes
DocID027223 Rev 4
17/18
STH275N8F7-2AG, STH275N8F7-6AG
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2017 STMicroelectronics – All rights reserved
18/18
DocID027223 Rev 4