STI150N10F7

STI150N10F7, STP150N10F7 N-channel 100 V, 0.0036 Ω typ., 110 A, STripFET™ F7 Power MOSFETs in I2PAK and TO-220 packages Datasheet − production data Features Order codes STI150N10F7 STP150N10F7 TAB TAB VDS RDS(on)max 100 V 0.0042 Ω ID PTOT 110 A 250 W • Among the lowest RDS(on) on the market • Excellent figure of merit (FoM) • Low Crss/Ciss ratio for EMI immunity 3 3 12 1 2 I PAK 2 • High avalanche ruggedness TO-220 Applications • Switching applications Figure 1. Internal schematic diagram Description These N-channel Power MOSFETs utilize STripFET™ F7 technology with an enhanced trench gate structure that results in very low onstate resistance, while also reducing internal capacitance and gate charge for faster and more efficient switching. '7$% * 6 $0Y Table 1. Device summary Order codes Marking Package STI150N10F7 150N10F7 STP150N10F7 August 2014 This is information on a product in full production. I2PAK Packaging Tube TO-220 DocID024552 Rev 4 1/15 www.st.com Contents STI150N10F7, STP150N10F7 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2/15 .............................................. 8 DocID024552 Rev 4 STI150N10F7, STP150N10F7 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VDS Drain-source voltage 100 V VGS Gate- source voltage ±20 V ID Drain current (continuous) at TC = 25 °C 110 A ID Drain current (continuous) at TC = 100 °C 110 A Drain current (pulsed) 440 A Total dissipation at TC = 25 °C 250 W EAS Single pulse avalanche energy 495 mJ TJ Operating junction temperature Tstg Storage temperature IDM (1) PTOT (2) °C -55 to 175 °C 1. Pulse width is limited by safe operating area 2. Starting Tj=25 °C, ID=30 A, VDD=50 V Table 3. Thermal data Symbol Parameter Value Unit Rthj-case Thermal resistance junction-case max 0.6 °C/W Rthj-amb Thermal resistance junction-ambient max 62.5 °C/W DocID024552 Rev 4 3/15 15 Electrical characteristics 2 STI150N10F7, STP150N10F7 Electrical characteristics (TC = 25 °C unless otherwise specified) Table 4. On /off states Symbol V(BR)DSS Parameter Drain-source breakdown voltage IDSS Zero gate voltage drain current IGSS Gate-body leakage current Test conditions VGS = 0, ID = 250 µA Min. Typ. Max. 100 Unit V VGS = 0, VDS = 100 V 1 µA VGS = 0, VDS = 100 V, TC=125 °C 100 µA VDS = 0, VGS = +20 V 100 nA 4.5 V VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA RDS(on) Static drain-source onVGS = 10 V, ID = 55 A resistance 2.5 0.0036 0.0042 Ω Table 5. Dynamic Symbol Parameter Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Qg Total gate charge Qgs Gate-source charge Qgd Gate-drain charge Test conditions VDS = 50 V, f = 1 MHz, VGS = 0 Min. Typ. Max. Unit - 8115 - pF - 1510 - pF - pF VDD = 50 V, ID = 110 A, VGS = 10 V (see Figure 14) 67 - 117 - nC - 47 - nC - 26 - nC Min. Typ. Max. Unit - 33 - ns - 57 - ns - 72 - ns - 33 - ns Table 6. Switching times Symbol td(on) tr td(off) tf 4/15 Parameter Test conditions Turn-on delay time Rise time Turn-off delay time VDD = 50 V, ID = 55 A, RG = 4.7 Ω, VGS = 10 V (see Figure 13) Fall time DocID024552 Rev 4 STI150N10F7, STP150N10F7 Electrical characteristics Table 7. Source drain diode Symbol Parameter Test conditions Min. Typ. Max. Unit Source-drain current - 110 A ISDM (1) Source-drain current (pulsed) - 440 A VSD (2) Forward on voltage - 1.2 V ISD ISD = 110 A, VGS = 0 trr Reverse recovery time Qrr Reverse recovery charge IRRM Reverse recovery current ISD = 110 A, di/dt = 100 A/µs VDD = 80 V, TJ=150 °C (see Figure 15) - 70 ns - 165 nC - 4.7 A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%. DocID024552 Rev 4 5/15 15 Electrical characteristics 2.1 STI150N10F7, STP150N10F7 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Thermal impedance AM18051v1 ID (A) AM18052v1 K δ=0.5 0.2 100 th in n tio by m ra pe ited O m Li 10 is ea a r (on) S RD ax 0.1 0.05 is 100µs 10 -1 0.02 c 0.01 1ms 1 Tj=175°C Tc=25°C Single pulse 0.1 0.1 1 VDS(V) 10 Figure 4. Output characteristics VGS=10V 400 10 -2 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 tp(s) Figure 5. Transfer characteristics AM18042v1 ID (A) Single pulse 10ms 8V AM18043v1 ID (A) VDS=4V 300 350 7V 300 250 200 250 200 150 6V 150 100 100 50 50 5V 0 0 4 2 6 8 Figure 6. Gate charge vs gate-source voltage AM18044v1 VGS (V) VDD=50V ID=110A 12 0 0 VDS(V) 2 4 8 6 VGS(V) Figure 7. Static drain-source on-resistance AM18054v1 RDS(on) (mΩ) VGS=10V 3.62 10 3.61 8 3.60 6 3.59 3.58 4 3.57 2 3.56 3.55 0 0 6/15 40 80 120 Qg(nC) DocID024552 Rev 4 0 20 40 60 80 100 ID(A) STI150N10F7, STP150N10F7 Electrical characteristics Figure 8. Capacitance variations Figure 9. Normalized gate threshold voltage vs temperature AM18046v1 C (pF) AM18047v1 VGS(th) (norm) ID=250µA 1.1 Ciss 8000 1 7000 6000 0.9 5000 0.8 4000 0.7 3000 0.6 2000 0.5 1000 Coss Crss 100 VDS(V) 0 0 20 60 40 80 Figure 10. Normalized on-resistance vs temperature AM18048v1 RDS(on) 0.4 -75 -25 25 75 125 TJ(°C) Figure 11. Normalized V(BR)DSS vs temperature AM18049v1 V(BR)DDS (norm) (norm) ID=55A VGS=10V 2 1.04 1.8 1.03 1.6 1.02 1.4 1.01 1.2 1 1 0.99 0.8 0.98 0.6 0.97 0.4 -75 -25 25 75 125 TJ(°C) 0.96 -75 ID=1mA -25 25 75 125 TJ(°C) Figure 12. Source-drain diode forward characteristics AM18055v1 VSD (V) TJ=-55°C 1 0.9 TJ=25°C 0.8 0.7 TJ=175°C 0.6 0.5 0.4 0.3 0 20 40 60 80 100 ISD(A) DocID024552 Rev 4 7/15 15 Test circuits 3 STI150N10F7, STP150N10F7 Test circuits Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit VDD 12V 47kΩ 1kΩ 100nF 3.3 μF 2200 RL μF IG=CONST VDD VGS 100Ω Vi=20V=VGMAX VD RG 2200 μF D.U.T. D.U.T. VG 2.7kΩ PW 47kΩ 1kΩ PW AM01468v1 Figure 15. Test circuit for inductive load switching and diode recovery times A A AM01469v1 Figure 16. Unclamped inductive load test circuit L A D G D.U.T. FAST DIODE B B VD L=100μH S 3.3 μF B 25 Ω 1000 μF D VDD 2200 μF 3.3 μF VDD ID G RG S Vi D.U.T. Pw AM01470v1 AM01471v1 Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 8/15 0 DocID024552 Rev 4 10% AM01473v1 STI150N10F7, STP150N10F7 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DocID024552 Rev 4 9/15 15 Package mechanical data STI150N10F7, STP150N10F7 Figure 19. I²PAK (TO-262) drawing 0004982_Rev_H 10/15 DocID024552 Rev 4 STI150N10F7, STP150N10F7 Package mechanical data Table 8. I²PAK (TO-262) mechanical data mm. DIM. min. typ max. A 4.40 4.60 A1 2.40 2.72 b 0.61 0.88 b1 1.14 1.70 c 0.49 0.70 c2 1.23 1.32 D 8.95 9.35 e 2.40 2.70 e1 4.95 5.15 E 10 10.40 L 13 14 L1 3.50 3.93 L2 1.27 1.40 DocID024552 Rev 4 11/15 15 Package mechanical data STI150N10F7, STP150N10F7 Figure 20. TO-220 type A drawing BW\SH$B5HYB7 12/15 DocID024552 Rev 4 STI150N10F7, STP150N10F7 Package mechanical data Table 9. TO-220 type A mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 ∅P 3.75 3.85 Q 2.65 2.95 DocID024552 Rev 4 13/15 15 Revision history 5 STI150N10F7, STP150N10F7 Revision history Table 10. Document revision history Date Revision 16-Apr-2013 1 First release. 2 – The part number STH150N10F7-2 has been moved to a separate datasheet – Added: I2PAK package – Modified: Figure 1 – Modified: ID and IDM values in Table 2 – Modified: Rthj-case value in Table 3 – Modified: RDS(on) values in Table 4 – Modified: VSD, ID and the entire typical values in Table 5, 6 and 7 – Updated: Figure 13, 14, 15 and 16 – Updated: Section 4: Package mechanical data – Added: Section 2.1: Electrical characteristics (curves) – Minor text changes 3 – Datasheet status promoted from preliminary data to production data – Modified: Figure 10 – Minor text changes 22-Jan-2014 24-Feb-2014 20-Aug-2014 14/15 Changes – Updated title, features and description in cover page. – Added EAS parameter in Table 2: Absolute maximum ratings. – Minor text changes DocID024552 Rev 4 STI150N10F7, STP150N10F7 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2014 STMicroelectronics – All rights reserved DocID024552 Rev 4 15/15 15