STL128DNFP

STL128DN High voltage fast-switching NPN power transistor Features ■ ■ ■ ■ ■ TAB High voltage capability Low spread of dynamic parameters Very high switching speed Large RBSOA Integrated antiparallel collector-emitter diode 1 3 2 1 3 2 TO-220 TAB TO-220FP Applications ■ ■ Electronic ballast for fluorescent lighting Flyback and forward single transistor low power converters 1 3 TO-252 (DPAK) Description Figure 1. The device is manufactured using high voltage multi epitaxial planar technology for high switching speeds and medium voltage capability. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA. The device is designed for use in lighting applications and low cost switch-mode power supplies. Internal schematic diagram Table 1. Device summary Order codes STL128DN Marking L128DN L128DNFP LD128DN Packages TO-220 TO-220FP DPAK Packaging Tube Tube Tape and reel STL128DNFP STLD128DNT4 October 2009 Doc ID 13984 Rev 3 1/14 www.st.com 14 Content STL128DN Content 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 4 5 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 Doc ID 13984 Rev 3 STL128DN Electrical ratings 1 Electrical ratings Table 2. Symbol VCES VCEO VEBO IC ICM IB IBM Absolute maximum ratings Parameter Collector-emitter voltage (VBE = 0) Collector-emitter voltage (IB = 0) Base-emitter voltage (IC = 0, IB = 2 A, tP < 10 µs) Collector current Collector peak current (tP < 5 ms) Base current Base peak current (tP < 5 ms) Total dissipation at Tc = 25 °C for TO-220 Value 700 400 V(BR)EBO 4 8 2 4 60 28 20 -65 to 150 150 Unit V V V A A A A W W W °C °C PTOT Total dissipation at Tc = 25 °C for TO-220FP Total dissipation at Tc = 25 °C for DPAK Tstg TJ Storage temperature Max. operating junction temperature Table 3. Symbol RthJC Thermal data Parameter Thermal resistance junction-case max TO-220 2.08 TO-220FP 4.46 DPAK 6.25 Unit °C/W Doc ID 13984 Rev 3 3/14 Electrical characteristics STL128DN 2 Electrical characteristics Tcase = 25 °C unless otherwise specified Table 4. Symbol ICES ICEO Electrical characteristics Parameter Collector cut-off current (VBE = 0) Collector cut-off current (IB = 0) Emitter-base breakdown voltage (IC = 0) Test conditions VCE = 700 V VCE = 700 V VCE = 400 V Min. Typ. Max. 100 500 250 Unit µA µA µA Tc = 125 °C V(BR)EBO IE = 10 mA 9 18 V Collector-emitter VCEO(sus)(1) sustaining voltage (IB = 0) VCE(sat)(1) VBE(sat)(1) hFE(1) VF ts tf Collector-emitter saturation voltage Base-emitter saturation voltage DC current gain Diode forward voltage Resistive load Storage time Fall time IC = 10 mA IC = 1 A IC = 2 A IC = 1 A IC = 2 A IC = 10 mA IC = 2 A IF = 1 A IB1 = - IB2 = 0.2 A IC = 1 A VCC = 125 V tp = 20 µs IB = 0.2 A IB = 0.4 A IB = 0.2 A IB = 0.4 A VCE = 5 V VCE = 5 V 400 0.5 1 1.2 1.3 10 8 24 2.5 4.5 0.4 V V V V V V µs µs 1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 %. 4/14 Doc ID 13984 Rev 3 STL128DN Electrical characteristics 2.1 Figure 2. Electrical characteristics (curves) Safe operating area for TO-220 Figure 3. Safe operating area for TO-220FP Figure 4. Safe operating area for DPAK Figure 5. Derating curve Figure 6. DC current gain (VCE = 1 V) Figure 7. DC current gain (VCE = 5 V) Doc ID 13984 Rev 3 5/14 Electrical characteristics Figure 8. Collector-emitter saturation voltage Figure 9. STL128DN Base-emitter saturation voltage Figure 10. Freewheel diode forward voltage Figure 11. Resistive load switching time Figure 12. Reverse biased safe operating area 6/14 Doc ID 13984 Rev 3 STL128DN Test circuit 3 Test circuit Figure 13. Resistive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor Doc ID 13984 Rev 3 7/14 Package mechanical data STL128DN 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 8/14 Doc ID 13984 Rev 3 STL128DN Package mechanical data TO-220 type A mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 Typ Max 4.60 0.88 1.70 0.70 15.75 0015988_Rev_S Doc ID 13984 Rev 3 9/14 Package mechanical data STL128DN TO-220 type E mechanical data mm Dim Min A b b1 c D E e e1 F H1 J1 L L1 L20 øP Q 4.47 0.70 1.17 0.31 14.60 9.96 4.98 1.17 6.10 2.52 12.70 3.20 15.21 3.73 2.59 2.54 5.08 Typ Max 4.67 0.91 1.37 0.53 15.70 10.36 5.18 1.37 6.80 2.82 13.80 3.96 16.77 3.94 2.89 10/14 Doc ID 13984 Rev 3 STL128DN Package mechanical data TO-220FP mechanical data mm Dim. Min. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia 28.6 9.8 2.9 15.9 9 3 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 30.6 10.6 3.6 16.4 9.3 3.2 Typ. Max. 4.6 2.7 2.75 0.7 1 1.70 1.5 5.2 2.7 10.4 L7 E A B Dia L6 L5 F1 F2 F D H G1 G L2 L 3 L4 7012510_Rev_J Doc ID 13984 Rev 3 11/14 Package mechanical data STL128DN TO-252 (DPAK) mechanical data DIM. A A1 A2 b b4 c c2 D D1 E E1 e e1 H L L1 L2 L4 R V2 0o 0.60 0.20 8o 4.40 9.35 1 2.80 0.80 1 6.40 4. 70 2.28 4.60 10.10 mm. min. 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 5.10 6.60 ty p ma x . 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 0068772_G 12/14 Doc ID 13984 Rev 3 STL128DN Revision history 5 Revision history Table 5. Date 04-Oct-2007 14-Feb-2008 01-Oct-2009 Document revision history Revision 1 2 3 First release Updated TO-220, type E, mechanical data Updated: collector and base current values Table 2 on page 3, VCE(sat) maximum values Table 4 on page 4. Changes Doc ID 13984 Rev 3 13/14 STL128DN Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14 Doc ID 13984 Rev 3