STM1066C30F38F

STM1066 Smart voltage supervisor Features ■ ■ ■ ■ ■ ■ ■ ■ ■ Operating voltage 2.7 V to 5.5 V Supply current of 1.5 µA (typ) Factory-trimmed voltage threshold from 3.2 V to 3.5 V in 50 mV increments ±3% voltage threshold accuracy across temperature Enable and inhibit inputs (EN, INH) Power supply transient immunity Current limited output of 15 mA (max) Available in flip chip 6-bump package Operating temperature –30°C to +85°C Flip chip (6-bump) Applications ■ ■ ■ ■ ■ ■ ■ Portable devices Cell phones/smart phones PDA Palmtops Organizers Portable audio/video players Portable terminals April 2008 Rev 4 1/20 www.st.com 1 Contents STM1066 Contents 1 2 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.1 2.2 2.3 Output, OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Enable input, EN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Inhibit input, INH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3 4 5 6 7 8 9 Typical operating characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 DC and AC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Part numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Package marking information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 2/20 STM1066 List of tables List of tables Table 1. Table 2. Table 3. Table 4. Table 5. Table 6. Table 7. Table 8. Table 9. Pin descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Truth table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Operating and AC measurement conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 DC and AC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Flip chip 6-bump, package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Ordering information scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Factory-trimmed thresholds with marking description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3/20 List of figures STM1066 List of figures Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Logic diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6-bump flip chip connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Application hookup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Supply current vs. supply voltage, VEN = 4 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Supply current vs. temperature, VEN = 4 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Supply current vs. supply voltage, VEN = 0 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Supply current vs. temperature, VEN = 0 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Rising voltage detector threshold vs. temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Threshold hysteresis vs. temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Flip chip 6-bump, package mechanical outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Flip chip tape and reel specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4/20 STM1066 Description 1 Description The STM1066 device monitors VCC, and connects OUT to VIN or GND, based on the VCC level (above VTH+ or below VTH- ) and the state of EN and INH inputs. The device offers several voltage thresholds, VTH+ (see Table 8) and it is available in miniature flip chip 6-bump package. Figure 1. Logic diagram VCC VIN EN STM1066 INH OUT GND ai 13963 5/20 Description STM1066 Table 1. Pin descriptions Pin 1A 1B 1C 2A 2B 2C Symbol VIN EN GND OUT INH VCC Function Supply for output pin (OUT) Enable from USB VBUS Ground Output Active high. Inhibits device Chip supply Figure 2. 6-bump flip chip connections A B C A B C 1 VIN EN GND 2 OUT INH VCC 2 OUT INH VCC 1 VIN EN GND bottom view, bumps up top view, bumps down ai 13915 6/20 STM1066 Figure 3. Block diagram VIN VCC Current source GND Description Band gap + OUT Level shifter EN Delay 2µs LOGIC VCC INH ai13916 Figure 4. Application hookup VBUS USB connector R1 USB charging and transceiver circuits VBAT DC-DC step-up converter OUT EN VCC C3 GND VBOOST R2 VBAT C1 EN Inhibit control INH GND STM1066 VCC VIN OUT ASIC VCHARGER C2 ai13917 7/20 Operation STM1066 2 Operation The STM1066 connects or disconnects the output OUT, from the VIN pin based on the logical combination of the enable input (EN), the inhibit input (INH), and the supply voltage level, VCC (see Table 2 or Figure 11 for more details). 2.1 Output, OUT If the enable input is in a logic high state and inhibit input is in a logic low state, the output will be connected to VIN input as VCC rises above the VTH+ voltage threshold. Otherwise, the output is connected to ground GND. The output is current limited (see Table 5). 2.2 Enable input, EN A Logic low on the enable input disconnects the output from VIN and disables the device, which enters a standby mode with very low current consumption (see Table 5). 2.3 Inhibit input, INH A logic high on the inhibit input disconnects the output from VIN. Table 2. Truth table VCC VTH- (falling edge) EN(1) x L x H INH x x H L OUT connected to GND connected to GND connected to GND connected to VIN 1. Once the device is disabled by EN input, the VCC must be above VTH+ to reconnect output to VIN. 8/20 STM1066 Typical operating characteristics 3 Typical operating characteristics Figure 5. Supply current vs. supply voltage, VEN = 4 V 3.0 2.5 Supply Current, ICC (µA) 2.0 1.5 1.0 0.5 0.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 TA = -30 ˚C TA = 25 ˚C TA = 0˚C TA = 85˚C Supply Voltage, VCC (V) ai13942 Figure 6. Supply current vs. temperature, VEN = 4 V 2.5 Supply Current, ICC (µA) 2.0 1.5 1.0 VCC = 2.70 V 0.5 VCC = 3.50 V VCC = 4.25 V VCC = 5.00 V VCC = 5.50 V -30 -20 -10 0 10 20 30 40 50 60 70 80 0.0 Temperature, TA (˚C) ai13943 9/20 Typical operating characteristics Figure 7. Supply current vs. supply voltage, VEN = 0 V STM1066 0.8 0.7 Supply Current, ICC (µA) 0.6 0.5 0.4 0.3 0.2 0.1 0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 TA = -30 ˚C TA = 85 ˚C TA = 25 ˚C TA = 0 ˚C Supply Voltage, VCC (V) ai13944 Figure 8. Supply current vs. temperature, VEN = 0 V 0.65 Supply Current, ICC (µA) 0.60 0.55 VCC = 2.70 V VCC = 3.50 V 0.50 VCC = 4.25 V VCC = 5.00 V VCC = 5.50 V 0.45 -30 -20 -10 0 10 20 30 40 50 60 70 80 Temperature, TA (˚C) ai13945 10/20 STM1066 Figure 9. Typical operating characteristics Rising voltage detector threshold vs. temperature Rising voltage detector threshold, VTH+ (V) 3.50 maximum value 3.45 3.40 3.35 3.30 typical value minimum value 3.25 3.20 -30 -20 -10 0 10 20 30 40 50 60 70 80 Temperature, TA (˚C) ai13946 Figure 10. Threshold hysteresis vs. temperature 550 Threshold Hysteresis, VHYST (mV) maximum value 500 450 400 350 minimum value 300 250 -30 -20 -10 0 10 20 30 40 50 60 70 80 Temperature, TA (˚C) ai13947 11/20 Maximum ratings STM1066 4 Maximum ratings Stressing the device above the rating listed in the “Absolute maximum ratings” table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the Operating sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and other relevant quality documents. Table 3. Symbol VCC VIN VEN VOUT VINH TA Absolute maximum ratings Parameter Input supply voltage Output source voltage VBUS input Output pin Inhibit pin Operating ambient temperature Storage temperature Electrostatic protection –2000 Electrostatic protection –500 +2000 +500 V V Human body model Charged device model Min –0.2 –0.2 –0.2 –0.3 –0.3 –30 –45 –100 Typ Max +7.0 +7.0 VCC + 0.3 VIN + 0.3 VCC + 0.3 +85 +150 +100 Unit V V V V V °C °C V Machine model Independent of VCC Series 1M external resistor for protection Remarks 12/20 STM1066 DC and AC characteristics 5 DC and AC characteristics This section summarizes the operating measurement conditions and the DC and AC characteristics of the device. The parameters in the DC and AC characteristics tables that follow are derived from tests performed under the measurement conditions summarized in Table 4: Operating and AC measurement conditions. Designers should check that the operating conditions in their circuit match the operating conditions when relying on the quoted parameters. Table 4. Operating and AC measurement conditions Parameter VCC supply voltage Ambient operating temperature (TA) Input rise and fall times Condition 2.7 to 5.5 –30 to 85 ≤5 Unit V °C ns Figure 11. Waveforms V CC (V BAT ) V TH+ V TH~2.3V ~2.1V EN VIH EN (VBUS ) EN VIL INHIBIT V IN (5V input option) OUT Output follows Vin ai 13919 Note: VIN assumed to be from 1.6 V to 5.5 V. No VIN means no signal on OUT pin. If there is no VCC then there will be no VIN. 13/20 DC and AC characteristics Table 5. Sym VCC ICC STM1066 DC and AC characteristics Parameter Supply voltage Supply current into VCC pin VEN = 0 V VEN = 4 V VEN = 0 V VEN = 4 V –3% 0.3 VTH+ - VHYST VCC falling from (VTH- + 100 mV) to (VTH- – 100 mV) at 10 mV/µs VCC rising from (VTH+ – 100 mV) to (VTH+ + 100 mV) at 10m V/µs Allows 2.5 V rail, VBAT or +5 V 2.4 VTH+ Test condition(1) Min 2.7 0.6 1.5 Typ Max 5.5 1 15 5 15 +3% 0.5 Unit V µA µA µA µA V V V ICC +IIN VTH+ VHYST VTH- Current into VCC + VIN pins Rising voltage detector threshold (see Table 7 on page 17 for detailed listing) Threshold hysteresis Falling voltage detector threshold tPD-FALL(2) VCC falling to OUT delay 30 µs tPD-RISE(2) VCC rising to OUT delay 70 µs VIN Voltage on VIN pin Supply for output pin 5.5 V Output pin, OUT(3) VOUT-OH VOUT-OL IOUT Output high voltage, see Figure 11 Output low voltage Output current ISOURCE = 5 mA ISINK = 10 mA 5 VIN - 0.2 VIN 0.3 15 V V mA Enable input, EN VEN-IH VEN-IL IEN-IN When VBUS is valid When VBUS is not valid Enable input current EN glitch immunity Inhibit input, INH VINH-IH VINH-IL VINH-IN Inhibit logic high Inhibit logic low Inhibit input current INH glitch immunity 1 1.2 0.4 0.1 V V µA µs 1 1.2 0.4 0.1 V V µA µs 1. Valid for ambient operating temperature: TA = –30°C to +85°C; VCC = 2.7 V to 5.5 V (except where noted). 2. Guaranteed by design. 3. For VCC below VTH-, the output remains low down to VCC = 1 V. Below VCC = 1 V the voltage VIN must be less than VOUT-OL (max.) to guarantee output low voltage less than 0.3 V. 14/20 STM1066 Package mechanical data 6 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. Figure 12. Flip chip 6-bump, package mechanical outline Flip chip (6-bump) 15/20 Package mechanical data STM1066 Table 6. Symbol Flip chip 6-bump, package mechanical data mm Min Typ 0.60 0.205 0.395 0.215 1.17 0.255 1.20 0.80 0.36 0.77 0.36 0.18 0.40 0.80 0.40 0.20 0.20 0.05 0.035 0.045 0.050 0.001 0.44 0.83 0.44 0.22 0.014 0.030 0.014 0.007 0.295 1.23 0.008 0.046 Max 0.66 0.240 Min 0.021 0.007 inches Typ 0.024 0.008 0.015 0.010 0.047 0.031 0.016 0.031 0.016 0.008 0.008 0.002 0.002 0.002 0.017 0.033 0.017 0.009 0.012 0.048 Max 0.026 0.009 A A1 A2 b D D1 e E E1 SE f ccc $ 0.54 0.170 Figure 13. Flip chip tape and reel specifications Dot identifying pin A1 location 4.00±0.10 .05 1.5 0.200±0.015 5±0 0.71±0.05 2.00±0.05 1.75±0.10 3.50±0.05 TxS yww TxS yww TxS yww TxS yww TxS yww 0.90 ±0.05 4.00±0.10 All dimensions in mm User direction of unreeling 16/20 –0.10 8.00 +0.30 1.30 ±0.05 STM1066 Part numbering 7 Part numbering Table 7. Example: Ordering information scheme STM1066 C35 F3 8 F Device type STM1066 Threshold voltage (3.2 V to 3.5 V in 50 mV increments) C20: 3.20 V(1) C25: 3.25 V(1) C30: 3.30 V(1) C35: 3.35 V C40: 3.40 V(1) C45: 3.45 V(1) C50: 3.50 V(1) Package F3: Flip chip, lead-free, pitch = 400 µm, bump = 250 µm Temperature 8: –30°C to 85°C Shipping method F = ECOPACK® package, tape & reel 1. Contact local ST sales office for availability. 17/20 Package marking information STM1066 8 Table 8. Package marking information Factory-trimmed thresholds with marking description Rising voltage detector threshold VTH+ at ambient temperature TA from –30 to +85°C Min (–3%) Typ 3.20 3.25 3.30 3.35 3.40 3.45 3.50 Max (+3%) 3.296 3.348 3.399 3.451 3.502 3.554 3.605 TAS yww TBS yww TCS yww TDS yww TES yww TFS yww TGS yww Topside marking(1) Part number STM1066C20F38F STM1066C25F38F STM1066C30F38F STM1066C35F38F STM1066C40F38F STM1066C45F38F STM1066C50F38F 3.104 3.152 3.201 3.249 3.298 3.346 3.395 1. Where “y” = assembly year (0 to 9) and “ww” = assembly work week (01 to 52). 18/20 STM1066 Revision history 9 Revision history Table 9. Date 06-Sep-2007 03-Jan-2008 26-Mar-2008 09-Apr-2008 Document revision history Revision 1 2 3 4 Initial release. Updated cover page, Section 1, Figure 2, 11, 13, and Table 4; added Figure 1: Logic diagram; minor text and presentation changes. Updated Table 5, 6. Document status upgraded to full datasheet; updated Figure 12. Changes 19/20 STM1066 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 20/20