STM3210B-EVAL

STM3210B-EVAL STM3210B-EVAL evaluation board Data brief Features ■ Three 5 V power supply options: power jack, USB connector or daughterboard ■ Boot from user Flash, test Flash or SRAM ■ Audio play and record ■ 1 Gbyte microSD Card™ ■ Type A and Type B smartcard support ■ 8 Mbyte serial Flash ■ I2C/SMBus compatible serial interface temperature sensor ■ Two RS-232 communication channels with support for RTS/CTS handshake on one channel ■ IrDA transceiver ■ USB 2.0 full speed connection ■ CAN 2.0A/B compliant connection ■ Induction motor control connector ■ JTAG, SWD and trace tool support ■ 240x320 TFT color LCD ■ Joystick with 4-direction control and selector ■ Reset, wakeup, tamper and user push buttons ■ Four LEDs u d o ) (s r P e t e l o s b O t c u d o r P e t e l o s b O ■ RTC with backup battery ■ Extension connector for daughterboard or wrapping board Table 1. ) s ( ct Device summary Order code Reference STM3210B-EVAL STM32F10x 128 Kbyte evaluation board Description The STM3210B-EVAL evaluation board is designed as a complete development environment for STMicroelectronic’s ARMTM Cortex-M3 core-based STM32F10x 128 Kbyte microcontrollers. With a complete range of hardware evaluation features, the STM3210B-EVAL board is designed to help developers evaluate all device peripherals (such as USB, motor control, CAN, MicroSD Card™, smartcard, USART) and develop their own applications. Extension connectors make it possible to easily connect a daughterboard or wrapping board for a specific application. August 2010 Doc ID 17805 Rev 1 For further information contact your local STMicroelectronics sales office. 1/3 www.st.com 3 STM3210B-EVAL Revision history Table 2. Document revision history Date Revision 09-Aug-2010 1 Changes Initial release. ) s ( ct u d o r P e t e l o ) (s s b O t c u d o r P e t e l o s b O 2/3 Doc ID 17805 Rev 1 STM3210B-EVAL ) s ( ct Please Read Carefully: u d o Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. r P e All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. t e l o No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. ) (s s b O UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. t c u UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. d o r P e t e l o Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. s b O ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 17805 Rev 1 3/3