STM3210E-EVAL

STM3210E-EVAL Data brief Evaluation board with STM32F103Zx MCU Features • • STM32F103ZGT6 Arm® Cortex®‑M3 core-based microcontroller with 1 Mbyte of flash memory and 96 Kbytes of SRAM, in a 144‑pin TQFP package 240 x 320‑pixel TFT color LCD • • • • I2S audio DAC, with stereo output Both A‑ and B‑type smartcard support IrDA transceiver 512 Kx16 SRAM, 64‑ or 128‑Mbit serial, 512‑Mbit or 1‑Gbit NAND, and 128‑Mbit NOR flash memories • • • • • • I2C/SMBus compatible serial interface with temperature sensor RTC with backup battery 4 color LEDs Reset, wakeup, tamper, and user push-buttons 4‑way joystick with selection Board connectors: – 5V power jack – USB 2.0 FS Type-B – Two RS-232 channels with RTS/CTS handshake support on one channel – Stereo audio jack – Three ADC inputs – CAN 2.0 A/B compliant – Smartcard socket STM3210E-EVAL top view. Picture is not contractual. Product status link STM3210E-EVAL • – microSD™ card holder with 128‑Mbyte card – Coin‑battery cell holder for power backup – JTAG and ETM trace debugger connector – Motor‑control interface – Extension headers for daughterboard or wire-wrap board Three 5 V power supply options: power jack, USB connector, or daughterboard Description The STM3210E-EVAL Evaluation board is a complete development platform for STMicroelectronics Arm® Cortex®‑M3 core-based STM32F103ZGT6 microcontroller with full-speed USB 2.0, CAN 2.0 A/B compliant interface, two I2S channels, two I2C channels, five USART channels with smartcard support, three SPI channels, two DAC channels, FSMC interface, SDIO, internal 96‑Kbyte SRAM and 1‑Mbyte flash memory, and JTAG and SWD debug support. The STM3210E-EVAL products delivered with the MB672 board version D-03 or older are based on the STM32F103ZET6 instead of the STM32F103ZGT6 and include 64‑Kbyte internal SRAM and 512‑Kbyte flash memory. The board number and version are on a label on the bottom side of the board. The full range of hardware features on the board helps the user to evaluate all peripherals (USB, motor control, CAN, microSD™ card, smartcard, USART, NOR and NAND flash memories, SRAM) and develop his applications. Extension headers make it easy to connect a daughterboard or wire‑wrap board for his specific application. DB1054 - Rev 6 - September 2022 For further information contact your local STMicroelectronics sales office. www.st.com STM3210E-EVAL Ordering information 1 Ordering information To order the STM3210E-EVAL Evaluation board, refer to Table 1. For a detailed description, refer to its user manual on the product web page. Additional information is available from the datasheet and reference manual of the target microcontroller. Table 1. Ordering information Order code STM3210E-EVAL Board reference • MB672(1) • MB895(2) User manual UM0488 Target STM32 STM32F103ZET6(3) STM32F103ZGT6(4) 1. Mother board 2. LCD daughterboard 3. For MB672 mother board version D-03 and older. 4. For MB672 mother board newer than version D-03. 1.1 Product marking The stickers located on the top or bottom side of the PCB provide product information: • • Product order code and product identification for the first sticker Board reference with revision, and serial number for the second sticker On the first sticker, the first line provides the product order code, and the second line the product identification. On the second sticker, the first line has the following format: “MBxxxx-Variant-yzz”, where “MBxxxx” is the board reference, “Variant” (optional) identifies the mounting variant when several exist, "y" is the PCB revision and "zz" is the assembly revision, for example B01. The second line shows the board serial number used for traceability. Parts marked as “ES” or “E” are not yet qualified and therefore not approved for use in production. ST is not responsible for any consequences resulting from such use. In no event will ST be liable for the customer using any of these engineering samples in production. ST’s Quality department must be contacted prior to any decision to use these engineering samples to run a qualification activity. “E” or “ES” marking examples of location: • • On the targeted STM32 that is soldered on the board (For an illustration of STM32 marking, refer to the STM32 datasheet “Package information” paragraph at the www.st.com website). Next to the evaluation tool ordering part number that is stuck or silk-screen printed on the board. Some boards feature a specific STM32 device version, which allows the operation of any bundled commercial stack/library available. This STM32 device shows a "U" marking option at the end of the standard part number and is not available for sales. To use the same commercial stack in their applications, the developers may need to purchase a part number specific to this stack/library. The price of those part numbers includes the stack/library royalties. DB1054 - Rev 6 page 2/5 STM3210E-EVAL Development environment 2 Development environment The STM3210E-EVAL board runs with the STM32F103ZGT6 32-bit microcontroller based on the Arm® Cortex®‑M3 core. Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere. 2.1 System requirements Note: • Multi‑OS support: Windows® 10, Linux® 64-bit, or macOS® • USB Type-A or USB Type-C® to Type-B cable macOS® is a trademark of Apple Inc., registered in the U.S. and other countries and regions. Linux® is a registered trademark of Linus Torvalds. Windows is a trademark of the Microsoft group of companies. 2.2 Development toolchains • IAR Systems® - IAR Embedded Workbench®(1) • • Keil® - MDK-ARM(1) STMicroelectronics - STM32CubeIDE 1. On Windows® only. DB1054 - Rev 6 page 3/5 STM3210E-EVAL Revision history Table 2. Document revision history DB1054 - Rev 6 Date Revision Changes 6-Aug-2010 1 Initial release. 29-Oct-2010 2 Modified microcontroller. 23-Sep-2011 3 Added reference STM32F103ZGT6. 13-Apr-2022 4 Reshuffled document to the latest format, including the removal of STM3210E-EVAL hardware block diagram and Demonstration software. 20-Apr-2022 5 Aligned with user manual in System requirements. 6-Sep-2022 6 Updated Product marking section and board denomination in Ordering information. page 4/5 STM3210E-EVAL IMPORTANT NOTICE – READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2022 STMicroelectronics – All rights reserved DB1054 - Rev 6 page 5/5