STM32439I-EVAL2

STM32439I-EVAL Evaluation board with STM32F439NI MCU Data brief Features • STM32F439NIH6 microcontroller • 5.7” color VGA TFT LCD with capacitive touchscreen (640 x 480 pixels) • Six 5 V power supply options: – Power jack – ST-LINK/V2 USB connector – User USB HS connector – User USB FS1 connector – User USB FS2 connector – Daughterboard • SAI Audio DAC, stereo audio jack which supports headset with microphone • Stereo digital microphone, audio terminal connector used to connect external speakers • 2 GBytes (or more) SDIO interface microSD card • RF EEPROM on I2C compatible serial interface • RS-232 communication • IrDA transceiver • JTAG/SWD and ETM trace debug support, ST-LINK/V2 embedded • IEEE-802.3-2002 compliant Ethernet connector • Camera module • 8M x 32-bit SDRAM, 1M x 16-bit SRAM and 8M x 16-bit NOR Flash • Joystick with 4-directional control and selector • Reset, Wakeup and Tamper buttons • 4 color user LEDs • Extension connectors & memory connectors for daughterboard or wrapping board • USB OTG HS and FS with Micro-AB connectors • RTC with backup battery • CAN2.0A/B compliant connection • Potentiometer • Motor control connector February 2015 1. Picture not contractual Description The STM32439I-EVAL evaluation board is a complete demonstration and development platform for the STMicroelectronics ARM® Cortex®-M4 core-based STM32F439 line microcontrollers. The integrated ST-LINK/V2 provides an embedded in-circuit debugger and programmer for the STM32 MCU. Extension headers make it possible to easily connect a daughterboard for specific applications of the users. The STM32439I-EVAL evaluation board includes everything required for beginners and experienced users to develop applications quickly. DocID025214 Rev 2 For further information contact your local STMicroelectronics sales office. 1/3 www.st.com Demonstration software 1 STM32439I-EVAL Demonstration software Demonstration software is preloaded in the Flash memory on the board for easy demonstration of the device peripherals in standalone mode. For more information and to download the latest version available, refer to the STM32439I-EVAL demonstration software available on www.st.com. 2 Ordering information To order the evaluation board based on the STM32F439NI MCU with a 5.7” color VGA TFT LCD with a capacitive touchscreen, use the order code: STM32439I-EVAL2. 3 Revision history Table 1. Document revision history 2/3 Date Revision Changes 10-Sep-2013 1 Initial version. 09-Feb-2015 2 Updated Section : Features and Section 2: Ordering information DocID025214 Rev 2 STM32439I-EVAL IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved DocID025214 Rev 2 3/3 3