0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
STM32MP153CAC3

STM32MP153CAC3

  • 厂商:

    STMICROELECTRONICS(意法半导体)

  • 封装:

    TFBGA361

  • 描述:

    MPU WITH ARM DUAL CORTEX-A7 650

  • 数据手册
  • 价格&库存
STM32MP153CAC3 数据手册
STM32MP153C/F Arm® dual Cortex®-A7 800 MHz + Cortex®-M4 MPU, TFT, 37 comm. interfaces, 29 timers, adv. analog, crypto Datasheet - production data Features TFBGA LFBGA Includes ST state-of-the-art patented technology LFBGA448 (18 × 18mm) LFBGA354 (16 × 16mm) Pitch 0.8mm Core • 32-bit dual-core Arm® Cortex®-A7 – L1 32-Kbyte I / 32-Kbyte D for each core – 256-Kbyte unified level 2 cache – Arm® NEON™ and Arm® TrustZone® ® ® • 32-bit Arm Cortex -M4 with FPU/MPU – Up to 209 MHz (Up to 703 CoreMark®) Memories • External DDR memory up to 1 Gbyte – up to LPDDR2/LPDDR3-1066 16/32-bit – up to DDR3/DDR3L-1066 16/32-bit • 708 Kbytes of internal SRAM: 256 Kbytes of AXI SYSRAM + 384 Kbytes of AHB SRAM + 64 Kbytes of AHB SRAM in Backup domain and 4 Kbytes of SRAM in Backup domain • Dual mode Quad-SPI memory interface • Flexible external memory controller with up to 16-bit data bus: parallel interface to connect external ICs and SLC NAND memories with up to 8-bit ECC Security/safety • Secure boot, TrustZone® peripherals, active tamper • Cortex®-M4 resources isolation Reset and power management • 1.71 V to 3.6 V I/Os supply (5 V-tolerant I/Os) • POR, PDR, PVD and BOR • On-chip LDOs (RETRAM, BKPSRAM, USB 1.8 V, 1.1 V) TFBGA361 (12 × 12 mm) TFBGA257 (10 × 10 mm) min Pitch 0.5mm • Internal temperature sensors • Low-power modes: Sleep, Stop and Standby • DDR memory retention in Standby mode • Controls for PMIC companion chip Low-power consumption • Total current consumption down to 2 µA (Standby mode, no RTC, no LSE, no BKPSRAM, no RETRAM) Clock management • Internal oscillators: 64 MHz HSI oscillator, 4 MHz CSI oscillator, 32 kHz LSI oscillator • External oscillators: 8-48 MHz HSE oscillator, 32.768 kHz LSE oscillator • 5 × PLLs with fractional mode General-purpose input/outputs • Up to 176 I/O ports with interrupt capability – Up to 8 secure I/Os – Up to 6 Wakeup, 3 tampers, 1 active tamper Interconnect matrix • 2 bus matrices – 64-bit Arm® AMBA® AXI interconnect, up to 266 MHz – 32-bit Arm® AMBA® AHB interconnect, up to 209 MHz 3 DMA controllers to unload the CPU • 48 physical channels in total • Backup regulator (~0.9 V) May 2021 This is information on a product in full production. DS12503 Rev 6 1/256 www.st.com STM32MP153C/F • 1 × high-speed general-purpose master direct memory access controller (MDMA) • 2 × dual-port DMAs with FIFO and request router capabilities for optimal peripheral management – Pixel clock up to 90 MHz – Two layers with programmable colour LUT Up to 29 timers and 3 watchdogs Up to 37 communication peripherals • 2 × 32-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input • 6 × I2C FM+ (1 Mbit/s, SMBus/PMBus) • 2 × 16-bit advanced motor control timers • 4 × UART + 4 × USART (12.5 Mbit/s, ISO7816 interface, LIN, IrDA, SPI slave) • 10 × 16-bit general-purpose timers (including 2 basic timers without PWM) • 6 × SPI (50 Mbit/s, including 3 with full duplex I2S audio class accuracy via internal audio PLL or external clock) • 5 × 16-bit low-power timers • 4 × SAI (stereo audio: I2S, PDM, SPDIF Tx) • RTC with sub-second accuracy and hardware calendar • SPDIF Rx with 4 inputs • 2 × 4 Cortex®-A7 system timers (secure, nonsecure, virtual, hypervisor) • HDMI-CEC interface • 1 × SysTick M4 timer • MDIO Slave interface • 3 × SDMMC up to 8-bit (SD / e•MMC ™ • 3 × watchdogs (2 × independent and window) / SDIO) • 2 × CAN controllers supporting CAN FD protocol, out of which one supports timetriggered CAN (TTCAN) Hardware acceleration • AES 128, 192, 256, TDES • 2 × USB 2.0 high-speed Host + 1 × USB 2.0 full-speed OTG simultaneously – or 1 × USB 2.0 high-speed Host + 1 × USB 2.0 high-speed OTG simultaneously • HASH (MD5, SHA-1, SHA224, SHA256), HMAC • 2 × true random number generator (3 oscillators each) • 2 × CRC calculation unit • 10/100M or Gigabit Ethernet GMAC – IEEE 1588v2 hardware, MII/RMII/GMII/RGMII Debug mode • 8- to 14-bit camera interface up to 140 Mbyte/s • 8-Kbyte embedded trace buffer 6 analog peripherals 3072-bit fuses including 96-bit unique ID, up to 1184-bit available for user • Arm® CoreSight™ trace and debug: SWD and JTAG interfaces • 2 × ADCs with 16-bit max. resolution (12 bits up to 4.5 Msps, 14 bits up to 4 Msps, 16 bits up to 3.6 Msps) All packages are ECOPACK2 compliant • 1 × temperature sensor • 2 × 12-bit D/A converters (1 MHz) • 1 × digital filters for sigma delta modulator (DFSDM) with 8 channels/6 filters • Internal or external ADC/DAC reference VREF+ Graphics • LCD-TFT controller, up to 24-bit // RGB888 – up to WXGA (1366 × 768) @60 fps or up to Full HD (1920 × 1080) @30 fps 2/256 DS12503 Rev 6 STM32MP153C/F Contents Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3 Functional overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3.1 Dual-core Arm® Cortex®-A7 subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3.1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3.1.2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3.2 Arm® Cortex®-M4 with FPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 3.3 Memories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 3.3.1 External SDRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 3.3.2 Embedded SRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 3.4 DDR3/DDR3L/LPDDR2/LPDDR3 controller (DDRCTRL) . . . . . . . . . . . . 24 3.5 TrustZone address space controller for DDR (TZC) . . . . . . . . . . . . . . . . 25 3.6 Boot modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 3.7 Power supply management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 3.7.1 Power supply scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 3.7.2 Power supply supervisor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 3.8 Low-power strategy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 3.9 Reset and clock controller (RCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 3.9.1 Clock management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 3.9.2 System reset sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 3.10 Hardware semaphore (HSEM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 3.11 Inter-processor communication controller (IPCC) . . . . . . . . . . . . . . . . . . 31 3.11.1 IPCC main features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 3.12 General-purpose input/outputs (GPIOs) . . . . . . . . . . . . . . . . . . . . . . . . . . 32 3.13 TrustZone protection controller (ETZPC) . . . . . . . . . . . . . . . . . . . . . . . . . 32 3.14 Bus-interconnect matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 3.15 DMA controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 3.16 Nested vectored interrupt controller (NVIC) . . . . . . . . . . . . . . . . . . . . . . . 35 3.17 Extended interrupt and event controller (EXTI) . . . . . . . . . . . . . . . . . . . . 35 3.18 Cyclic redundancy check calculation unit (CRC1, CRC2) . . . . . . . . . . . . 36 DS12503 Rev 6 3/256 7 Contents 4/256 STM32MP153C/F 3.19 Flexible memory controller (FMC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 3.20 Dual Quad-SPI memory interface (QUADSPI) . . . . . . . . . . . . . . . . . . . . . 36 3.21 Analog-to-digital converters (ADCs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 3.22 Temperature sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 3.23 Digital temperature sensor (DTS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 3.24 VBAT operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 3.25 Digital-to-analog converters (DAC1, DAC2) . . . . . . . . . . . . . . . . . . . . . . . 38 3.26 Voltage reference buffer (VREFBUF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 3.27 Digital filter for sigma delta modulators (DFSDM1) . . . . . . . . . . . . . . . . . 39 3.28 Digital camera interface (DCMI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 3.29 LCD-TFT display controller (LTDC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 3.30 True random number generator (RNG1, RNG2) . . . . . . . . . . . . . . . . . . . 41 3.31 Cryptographic and hash processors (CRYP1, CRYP2 and HASH1, HASH2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 3.32 Boot and security and OTP control (BSEC) . . . . . . . . . . . . . . . . . . . . . . . 42 3.33 Timers and watchdogs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 3.33.1 Advanced-control timers (TIM1, TIM8) . . . . . . . . . . . . . . . . . . . . . . . . . 44 3.33.2 General-purpose timers (TIM2, TIM3, TIM4, TIM5, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 3.33.3 Basic timers TIM6 and TIM7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 3.33.4 Low-power timer (LPTIM1, LPTIM2, LPTIM3, LPTIM4, LPTIM5) . . . . . 45 3.33.5 Independent watchdog (IWDG1, IWDG2) . . . . . . . . . . . . . . . . . . . . . . . 45 3.33.6 System window watchdog (WWDG1) . . . . . . . . . . . . . . . . . . . . . . . . . . 45 3.33.7 SysTick timer (Cortex-M4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 3.33.8 Generic timers (Cortex-A7 CNT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 3.34 System timer generation (STGEN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 3.35 Real-time clock (RTC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 3.36 Tamper and backup registers (TAMP) . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 3.37 Inter-integrated circuit interface (I2C1, I2C2, I2C3, I2C4, I2C5, I2C6) . . . 49 3.38 Universal synchronous asynchronous receiver transmitter (USART1, USART2, USART3, USART6 and UART4, UART5, UART7, UART8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 3.39 Serial peripheral interface (SPI1, SPI2, SPI3, SPI4, SPI5, SPI6)– inter- integrated sound interfaces (I2S1, I2S2, I2S3) . . . . . . . . . . 50 3.40 Serial audio interfaces (SAI1, SAI2, SAI3, SAI4) . . . . . . . . . . . . . . . . . . . 51 3.41 SPDIF receiver interface (SPDIFRX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 DS12503 Rev 6 STM32MP153C/F Contents 3.42 Management data input/output (MDIOS) . . . . . . . . . . . . . . . . . . . . . . . . . 52 3.43 Secure digital input/output MultiMediaCard interface (SDMMC1, SDMMC2, SDMMC3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 3.44 Controller area network (FDCAN1, FDCAN2) . . . . . . . . . . . . . . . . . . . . . 52 3.45 Universal serial bus high-speed host (USBH) . . . . . . . . . . . . . . . . . . . . . 53 3.46 USB on-the-go high-speed (OTG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 3.47 Gigabit Ethernet MAC interface (ETH1) . . . . . . . . . . . . . . . . . . . . . . . . . . 54 3.48 High-definition multimedia interface (HDMI) – Consumer electronics control (CEC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 3.49 Debug infrastructure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 4 Pinouts, pin description and alternate functions . . . . . . . . . . . . . . . . . 56 5 Memory mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 6 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 6.1 Parameter conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119 6.1.1 Minimum and maximum values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 6.1.2 Typical values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 6.1.3 Typical curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 6.1.4 Loading capacitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 6.1.5 Pin input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 6.1.6 Power supply scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 6.1.7 Current consumption measurement . . . . . . . . . . . . . . . . . . . . . . . . . . 121 6.2 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 6.3 Operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 6.3.1 General operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 6.3.2 Operating conditions at power-up / power-down . . . . . . . . . . . . . . . . . 125 6.3.3 Embedded reset and power control block characteristics . . . . . . . . . . 127 6.3.4 Embedded reference voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 6.3.5 Embedded regulators characteristics . . . . . . . . . . . . . . . . . . . . . . . . . 130 6.3.6 Supply current characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 6.3.7 Wakeup time from low-power modes . . . . . . . . . . . . . . . . . . . . . . . . . . 142 6.3.8 External clock source characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 144 6.3.9 External clock source security characteristics . . . . . . . . . . . . . . . . . . . 150 6.3.10 Internal clock source characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 150 6.3.11 PLL characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 DS12503 Rev 6 5/256 7 Contents 7 STM32MP153C/F 6.3.12 PLL spread spectrum clock generation (SSCG) characteristics . . . . . 155 6.3.13 Memory characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 6.3.14 EMC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 6.3.15 Absolute maximum ratings (electrical sensitivity) . . . . . . . . . . . . . . . . 160 6.3.16 I/O current injection characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 6.3.17 I/O port characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 6.3.18 NRST and NRST_CORE pin characteristics . . . . . . . . . . . . . . . . . . . . 170 6.3.19 FMC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 6.3.20 QUADSPI interface characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 6.3.21 Delay block (DLYB) characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 6.3.22 16-bit ADC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 6.3.23 DAC electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 6.3.24 Voltage reference buffer characteristics . . . . . . . . . . . . . . . . . . . . . . . 202 6.3.25 Temperature sensor characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 6.3.26 DTS characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 6.3.27 VBAT ADC monitoring characteristics and charging characteristics . . 205 6.3.28 Temperature and VBAT monitoring characteristics for tamper detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 6.3.29 VDDCORE monitoring characteristics . . . . . . . . . . . . . . . . . . . . . . . . . 206 6.3.30 Voltage booster for analog switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 6.3.31 Compensation cell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 6.3.32 Digital filter for sigma-delta modulators (DFSDM) characteristics . . . . 206 6.3.33 Camera interface (DCMI) characteristics . . . . . . . . . . . . . . . . . . . . . . . 209 6.3.34 LCD-TFT controller (LTDC) characteristics . . . . . . . . . . . . . . . . . . . . . 210 6.3.35 Timer characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 6.3.36 Communications interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 6.3.37 USART interface characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 6.3.38 USB High-Speed PHY characteristics . . . . . . . . . . . . . . . . . . . . . . . . . 231 6.3.39 JTAG/SWD interface characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 232 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 7.1 TFBGA257 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 7.2 LFBGA354 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239 7.3 TFBA361 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 7.4 LFBGA448 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 7.5 Thermal characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249 7.5.1 6/256 Reference documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 DS12503 Rev 6 STM32MP153C/F Contents 8 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252 DS12503 Rev 6 7/256 7 List of tables STM32MP153C/F List of tables Table 1. Table 2. Table 3. Table 4. Table 5. Table 6. Table 7. Table 8. Table 9. Table 10. Table 11. Table 12. Table 13. Table 14. Table 15. Table 16. Table 17. Table 18. Table 19. Table 20. Table 21. Table 22. Table 23. Table 24. Table 25. Table 26. Table 27. Table 28. Table 29. Table 30. Table 31. Table 32. Table 33. Table 34. Table 35. Table 36. Table 37. Table 38. Table 39. Table 40. Table 41. Table 42. Table 43. Table 44. Table 45. 8/256 STM32MP153C/F features and peripheral counts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Boot modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 System versus domain power mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Timer feature comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 USART features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Legend/abbreviations used in the pinout table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 STM32MP153C/F pin and ball definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Alternate function AF0 to AF7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Alternate function AF8 to AF15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Voltage characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Current characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Thermal characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 General operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Operating conditions at power-up / power-down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Embedded reset and power control block characteristics. . . . . . . . . . . . . . . . . . . . . . . . . 127 Embedded reference voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 Embedded reference voltage calibration value. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 REG1V1 embedded regulator (USB_PHY) characteristics . . . . . . . . . . . . . . . . . . . . . . . 130 REG1V8 embedded regulator (USB) characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Current consumption (IDDCORE) in Run mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Current consumption (IDD) in Run mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Current consumption in Stop mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Current consumption in LPLV-Stop mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Current consumption in Standby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Current consumption in VBAT mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 Low-power mode wakeup timings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Wakeup time using USART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 High-speed external user clock characteristics (digital bypass) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 High-speed external user clock characteristics (analog bypass) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 Low-speed external user clock characteristics (analog bypass) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Low-speed external user clock characteristics (digital bypass) . . . . . . . . . . . . . . . . . . . . 146 8-48 MHz HSE oscillator characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 Low-speed external user clock characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 High-speed external user clock security system (HSE CSS) . . . . . . . . . . . . . . . . . . . . . . 150 HSI oscillator characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 CSI oscillator characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 LSI oscillator characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 PLL1_1600, PLL2_1600 characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 PLL3_800, PLL4_800 characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 USB_PLL characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 SSCG parameters constraint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 OTP characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 DC specifications – DDR3 or DDR3L mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 DC specifications – LPDDR2 or LPDDR3 mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 EMS characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 DS12503 Rev 6 STM32MP153C/F Table 46. Table 47. Table 48. Table 49. Table 50. Table 51. Table 52. Table 53. Table 54. Table 55. Table 56. Table 57. Table 58. Table 59. Table 60. Table 61. Table 62. Table 63. Table 64. Table 65. Table 66. Table 67. Table 68. Table 69. Table 70. Table 71. Table 72. Table 73. Table 74. Table 75. Table 76. Table 77. Table 78. Table 79. Table 80. Table 81. Table 82. Table 83. Table 84. Table 85. Table 86. Table 87. Table 88. Table 89. Table 90. Table 91. Table 92. Table 93. Table 94. Table 95. Table 96. List of tables EMI characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 ESD absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Electrical sensitivities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 I/O current injection susceptibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 I/O static characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Output voltage characteristics for all I/Os except PC13, PC14, PC15 and PI8 . . . . . . . . 164 Output voltage characteristics for PC13, PC14, PC15 and PI8 . . . . . . . . . . . . . . . . . . . . 165 Output timing characteristics (HSLV OFF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Output timing characteristics (HSLV ON, _h IO structure) . . . . . . . . . . . . . . . . . . . . . . . . 168 Output timing characteristics (HSLV ON, _vh IO structure) . . . . . . . . . . . . . . . . . . . . . . . 169 NRST and NRST_CORE pin characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Asynchronous non-multiplexed SRAM/PSRAM/NOR read timings . . . . . . . . . . . . . . . . . 173 Asynchronous non-multiplexed SRAM/PSRAM/NOR read - NWAIT timings . . . . . . . . . . 173 Asynchronous non-multiplexed SRAM/PSRAM/NOR write timings . . . . . . . . . . . . . . . . . 174 Asynchronous non-multiplexed SRAM/PSRAM/NOR write - NWAIT timings. . . . . . . . . . 175 Asynchronous multiplexed PSRAM/NOR read timings. . . . . . . . . . . . . . . . . . . . . . . . . . . 176 Asynchronous multiplexed PSRAM/NOR read-NWAIT timings . . . . . . . . . . . . . . . . . . . . 176 Asynchronous multiplexed PSRAM/NOR write timings . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Asynchronous multiplexed PSRAM/NOR write-NWAIT timings . . . . . . . . . . . . . . . . . . . . 178 Synchronous multiplexed NOR/PSRAM read timings . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 Synchronous multiplexed PSRAM write timings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 Synchronous non-multiplexed NOR/PSRAM read timings . . . . . . . . . . . . . . . . . . . . . . . . 183 Synchronous non-multiplexed PSRAM write timings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 Switching characteristics for NAND Flash read cycles . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 Switching characteristics for NAND Flash write cycles. . . . . . . . . . . . . . . . . . . . . . . . . . . 188 QUADSPI characteristics in SDR mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 QUADSPI characteristics in DDR mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 Dynamics characteristics: Delay block characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 ADC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Minimum sampling time versus RAIN with 47 pF PCB capacitor up to 125 °C and VDDA = 1.6 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 ADC accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 Minimum delay for interleaved conversion versus resolution . . . . . . . . . . . . . . . . . . . . . . 196 DAC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 DAC accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 VREFBUF characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 Temperature sensor characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 Temperature sensor calibration values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 DTS characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 VBAT ADC monitoring characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 VBAT charging characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 Temperature and VBAT monitoring characteristics for temper detection . . . . . . . . . . . . . 205 VDDCORE monitoring characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 Voltage booster for analog switch characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 Compensation cell characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 DFSDM measured timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 DCMI characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 LTDC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 TIMx characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 LPTIMx characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 Minimum i2c_ker_ck frequency in all I2C modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 I2C analog filter characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 DS12503 Rev 6 9/256 10 List of tables Table 97. Table 98. Table 99. Table 100. Table 101. Table 102. Table 103. Table 104. Table 105. Table 106. Table 107. Table 108. Table 109. Table 110. Table 111. Table 112. Table 113. Table 114. Table 115. Table 116. Table 117. Table 118. Table 119. Table 120. Table 121. Table 122. Table 123. Table 124. 10/256 STM32MP153C/F I2C FM+ pin characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 SPI dynamic characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 I2S dynamic characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 SAI characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 MDIOS timing parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 Dynamic characteristics: SD / MMC / e•MMC characteristics, VDD = 2.7 V to 3.6 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Dynamic characteristics: SD / MMC / e•MMC characteristics VDD = 1.71 V to 1.9 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 USB OTG_FS electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 Dynamics characteristics: Ethernet MAC timings for MDIO/SMA. . . . . . . . . . . . . . . . . . . 226 Dynamics characteristics: Ethernet MAC timings for RMII . . . . . . . . . . . . . . . . . . . . . . . . 226 Dynamics characteristics: Ethernet MAC timings for MII . . . . . . . . . . . . . . . . . . . . . . . . . 227 Dynamics characteristics: Ethernet MAC signals for GMII . . . . . . . . . . . . . . . . . . . . . . . 228 Dynamics characteristics: Ethernet MAC signals for RGMII . . . . . . . . . . . . . . . . . . . . . . 229 USART characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 USB High-Speed PHY characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 Dynamics characteristics: JTAG characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 Dynamics characteristics: SWD characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 TFBGA257 - Mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236 TFBGA257 - Recommended PCB design rules (0.5/0.65 mm pitch, BGA) . . . . . . . . . . . 237 LFBGA354 - Mechanical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239 LFBGA354 - Recommended PCB design rules (0.8 mm pitch, BGA) . . . . . . . . . . . . . . . 241 TFBGA361 - Mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243 TFBGA361 - Recommended PCB design rules (0.5/0.65 mm pitch BGA) . . . . . . . . . . . . 244 LFBGA448 - Mechanical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 LFBGA448 - Recommended PCB design rules (0.8 mm pitch, BGA) . . . . . . . . . . . . . . . 247 Thermal characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249 STM32MP153C/F ordering information scheme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251 Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252 DS12503 Rev 6 STM32MP153C/F List of figures List of figures Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Figure 16. Figure 17. Figure 18. Figure 19. Figure 20. Figure 21. Figure 22. Figure 23. Figure 24. Figure 25. Figure 26. Figure 27. Figure 28. Figure 29. Figure 30. Figure 31. Figure 32. Figure 33. Figure 34. Figure 35. Figure 36. Figure 37. Figure 38. Figure 39. Figure 40. Figure 41. Figure 42. Figure 43. Figure 44. Figure 45. Figure 46. Figure 47. Figure 48. STM32MP153C/F block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Power-up/down sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 STM32MP153C/F bus matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Voltage reference buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 STM32MP153C/FADxx TFBGA257 pinout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 STM32MP153C/FABxx LFBGA354 pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 STM32MP153C/FACxx TFBGA361 pinout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 STM32MP153C/FAAxx LFBGA448 pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Pin loading conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Pin input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Power supply scheme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Current consumption measurement scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 VDDCORE rise time from reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 VDDCORE rise time from LPLV-Stop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 High-speed external clock source AC timing diagram (digital bypass) . . . . . . . . . . . . . . . 144 High-speed external clock source AC timing diagram (analog bypass) . . . . . . . . . . . . . . 145 Low-speed external clock source AC timing diagram (analog bypass) . . . . . . . . . . . . . . 146 Low-speed external clock source AC timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 Typical application with a 24 MHz crystal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 Typical application with a 32.768 kHz crystal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 PLL output clock waveforms in center spread mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 PLL output clock waveforms in down spread mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 VIL/VIH for FT I/Os . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 Recommended NRST and NRST_CORE pin protection . . . . . . . . . . . . . . . . . . . . . . . . . 171 Asynchronous non-multiplexed SRAM/PSRAM/NOR read waveforms . . . . . . . . . . . . . . 172 Asynchronous non-multiplexed SRAM/PSRAM/NOR write waveforms . . . . . . . . . . . . . . 174 Asynchronous multiplexed PSRAM/NOR read waveforms. . . . . . . . . . . . . . . . . . . . . . . . 175 Asynchronous multiplexed PSRAM/NOR write waveforms . . . . . . . . . . . . . . . . . . . . . . . 177 Synchronous multiplexed NOR/PSRAM read timings . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 Synchronous multiplexed PSRAM write timings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 Synchronous non-multiplexed NOR/PSRAM read timings . . . . . . . . . . . . . . . . . . . . . . . . 183 Synchronous non-multiplexed PSRAM write timings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 NAND controller waveforms for read access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 NAND controller waveforms for write access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 NAND controller waveforms for common memory read access . . . . . . . . . . . . . . . . . . . . 187 NAND controller waveforms for common memory write access. . . . . . . . . . . . . . . . . . . . 187 QUADSPI timing diagram - SDR mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 QUADSPI timing diagram - DDR mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 ADC accuracy characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 Typical connection diagram using the ADC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 12-bit buffered /non-buffered DAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 Channel transceiver timing diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 DCMI timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 LCD-TFT horizontal timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 LCD-TFT vertical timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 SPI timing diagram - slave mode and CPHA = 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 SPI timing diagram - slave mode and CPHA = 1(1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 SPI timing diagram - master mode(1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 DS12503 Rev 6 11/256 12 List of figures Figure 49. Figure 50. Figure 51. Figure 52. Figure 53. Figure 54. Figure 55. Figure 56. Figure 57. Figure 58. Figure 59. Figure 60. Figure 61. Figure 62. Figure 63. Figure 64. Figure 65. Figure 66. Figure 67. Figure 68. Figure 69. Figure 70. Figure 71. Figure 72. Figure 73. Figure 74. Figure 75. Figure 76. Figure 77. 12/256 STM32MP153C/F I2S slave timing diagram (Philips protocol)(1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 I2S master timing diagram (Philips protocol)(1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 SAI master timing waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 SAI slave timing waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 MDIOS timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 SDIO high-speed mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 SD default mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 DDR mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 Ethernet MDIO/SMA timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 Ethernet RMII timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 Ethernet MII timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 Ethernet GMII timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 Ethernet RGMII timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 USART timing diagram in master mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 USART timing diagram in slave mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 JTAG timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 SWD timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 TFBGA257 - Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 TFBGA257 - Recommended footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 TFBGA257 marking (package top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238 LFBGA354 - Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239 LFBGA354 - Recommended footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 LFBGA354 marking (package top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 TFBGA361 - Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 TFBGA361 - Recommended footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 TFBGA361 marking (package top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 LFBGA448 - Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 LFBGA448 - Recommended footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 LFBGA448 marking (package top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 DS12503 Rev 6 STM32MP153C/F 1 Introduction Introduction This datasheet provides the ordering information and mechanical device characteristics of the STM32MP153C/F microprocessors. This document should be read in conjunction with the STM32MP153 reference manual (RM0442), available from the STMicroelectronics website www.st.com. For information on the Arm®(a) Cortex®-A7 and Cortex®-M4 cores, refer to the Cortex®-A7 and Cortex®-M4 Technical Reference Manuals. For information on the device errata with respect to the datasheet and reference manual, refer to the STM32MP153C/F errata sheet (ES0438), available on the STMicroelectronics website www.st.com. a. Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere. DS12503 Rev 6 13/256 55 Description 2 STM32MP153C/F Description The STM32MP153C/F devices are based on the high-performance dual-core Arm® Cortex®-A7 32-bit RISC core operating at up to 800 MHz. The Cortex-A7 processor includes a 32-Kbyte L1 instruction cache for each CPU, a 32-Kbyte L1 data cache for each CPU and a 256-Kbyte level2 cache. The Cortex-A7 processor is a very energy-efficient application processor designed to provide rich performance in high-end wearables, and other low-power embedded and consumer applications. It provides up to 20% more single thread performance than the Cortex-A5 and provides similar performance than the CortexA9. The Cortex-A7 incorporates all features of the high-performance Cortex-A15 and CortexA17 processors, including virtualization support in hardware, NEON™, and 128-bit AMBA®4 AXI bus interface. The STM32MP153C/F devices also embed a Cortex® -M4 32-bit RISC core operating at up to 209 MHz frequency. Cortex-M4 core features a floating point unit (FPU) single precision which supports Arm® single-precision data-processing instructions and data types. The Cortex® -M4 supports a full set of DSP instructions and a memory protection unit (MPU) which enhances application security. The STM32MP153C/F devices provide an external SDRAM interface supporting external memories up to 8-Gbit density (1 Gbyte), 16 or 32-bit LPDDR2/LPDDR3 or DDR3/DDR3L up to 533 MHz. The STM32MP153C/F devices incorporate high-speed embedded memories with 708 Kbytes of Internal SRAM (including 256 Kbytes of AXI SYSRAM, 3 banks of 128 Kbytes each of AHB SRAM, 64 Kbytes of AHB SRAM in backup domain and 4 Kbytes of SRAM in backup domain), as well as an extensive range of enhanced I/Os and peripherals connected to APB buses, AHB buses, a 32-bit multi-AHB bus matrix and a 64-bit multi layer AXI interconnect supporting internal and external memories access. 14/256 DS12503 Rev 6 STM32MP153C/F Description All the devices offer two ADCs, two DACs, a low-power RTC, 12 general-purpose 16-bit timers, two PWM timers for motor control, five low-power timers, a true random number generator (RNG), and a cryptographic acceleration cell. The devices support six digital filters for external sigma delta modulators (DFSDM). They also feature standard and advanced communication interfaces. • Standard peripherals – • Six I2Cs – Four USARTs and four UARTs – Six SPIs, three I2Ss full-duplex master/slave. To achieve audio class accuracy, the I2S peripherals can be clocked via a dedicated internal audio PLL or via an external clock to allow synchronization. – Four SAI serial audio interfaces – One SPDIF Rx interface – Management data input/output slave (MDIOS) – Three SDMMC interfaces – An USB high-speed Host with two ports two high-speed PHYs and a USB OTG high-speed with full-speed PHY or high-speed PHY shared with second port of USB Host. – Two FDCAN interface, including one supporting TTCAN mode – A Gigabit Ethernet interface – HDMI-CEC Advanced peripherals including – A flexible memory control (FMC) interface – A Quad-SPI Flash memory interface – A camera interface for CMOS sensors – An LCD-TFT display controller Refer to Table 1: STM32MP153C/F features and peripheral counts for the list of peripherals available on each part number. A comprehensive set of power-saving mode allows the design of low-power applications. The STM32MP153C/F devices are proposed in 4 packages ranging from 257 to 448 balls with pitch 0.5 mm to 0.8 mm. The set of included peripherals changes with the device chosen. These features make the STM32MP153C/F suitable for a wide range of consumer, industrial, white goods and medical applications. shows the general block diagram of the device family. DS12503 Rev 6 15/256 55 Description STM32MP153C/F STM32MP153CABxx STM32MP153FABxx STM32MP153CACxx STM32MP153FACxx STM32MP153CAAxx STM32MP153FAAxx TFBGA257 LFBGA354 TFBGA361 LFBGA448 Body size (mm) 10x10 16x16 12x12 18x18 Pitch (mm) 0.5(1) 0.8 0.5(1) 0.8 Ball size (mm) 0.30 0.40 0.30 0.40 Thickness (mm)
STM32MP153CAC3 价格&库存

很抱歉,暂时无法提供与“STM32MP153CAC3”相匹配的价格&库存,您可以联系我们找货

免费人工找货