STM6905PWEDS6F

STM6905 Quintuple, ultralow voltage supervisor with push-button reset Datasheet - production data • 600 mV internal reference • RST output (open drain) • Output guaranteed for VCC ≥ 0.8 V • Reset delay time (TREC) on power-up: 210 ms (typ) MSOP8 (TSSOP8) (DS) • Manual reset input (MR) • Low supply current of 12 µA (typ) • Power supply voltage 0.8 V to 5.5 V • RoHS compliant (green package) Features • 8-pin MSOP/TSSOP • Operating temperature: –40 °C to 85 °C (industrial grade) • Quintuple voltage monitoring • Accurate ±1.8 % across temperature voltage threshold (±1 % at 25 °C) Applications • Primary supply (VCC) monitor. Fixed (factory programmed) reset thresholds: 3.078 V to 2.866 V • Set-top boxes • Multi-voltage systems • Second fixed (V2IN) monitor. Fixed (factoryprogrammed) reset thresholds: 2.333 V to 1.050 V • Cable/satellite applications • Computer systems • Data storage equipment • Three additional adjustable supply monitor inputs (externally adjustable) Table 1. Device summary(1) Order code VRST1 (V) STM6905TZEDS6F STM6905TWEDS6F VRST2 (V) 3.078 STM6905SYEDS6F 2.188 1. 210 MSOP8 (TSSOP8) 1.683 1.110 STM6905PWEDS6F Package 2.333 STM6905TGEDS6F STM6905SFEDS6F tREC (ms) 2.955 2.866 1.050 1.683 Other reset threshold voltages and tREC time-out periods are offered. Contact local ST sales office for availability. October 2014 This is information on a product in full production. DocID14290 Rev 4 1/19 www.st.com Contents STM6905 Contents 1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 Pin descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 2.1 Push-button reset input (MR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.2 VCC primary supply voltage monitoring input . . . . . . . . . . . . . . . . . . . . . . . 7 2.3 V2IN second fixed voltage monitoring input . . . . . . . . . . . . . . . . . . . . . . . . 7 2.4 VSS 2.5 V3IN, V4IN, and V5IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.6 RST active-low, open drain reset output . . . . . . . . . . . . . . . . . . . . . . . . . . 7 .....................................................................7 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3.1 Setting the adjustable voltage levels for V3IN, V4IN, and V5IN inputs . . . 9 3.2 Power on reset (tREC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 Voltage monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6 DC and AC parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 7 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 8 Part numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 9 Package marking information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 10 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2/19 DocID14290 Rev 4 STM6905 List of tables List of tables Table 1. Table 2. Table 3. Table 4. Table 5. Table 6. Table 7. Table 8. Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Signal names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 DC and AC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 TSSOP8 3 mm x 3 mm, package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Ordering information scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Marking description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 DocID14290 Rev 4 3/19 3 List of figures STM6905 List of figures Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. 4/19 Logic diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 MSOP/TSSOP-8 connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Functional block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Typical hardware hookup application diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MR timing waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Voltage monitoring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 TSSOP8 3 mm x 3 mm, package mechanical outline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 DocID14290 Rev 4 STM6905 1 Description Description The STM6905 supervisor is a low voltage/low supply current processor supervisor, designed to monitor up to five system power supply voltages. This device is targeted at applications such as set-top boxes (STBs), portable, battery-powered systems, networking and communication systems. The device supports a push-button type manual reset input (MR). Two of the five supply monitors (VCC and V2IN) have fixed (customer-selectable, factory-trimmed) thresholds (VRST1 and VRST2). The other three voltage monitor inputs (V3IN, V4IN and V5IN) are monitored using externally adjustable threshold (600 mV internal reference) to meet specific level requirements. If any of the five monitored voltages drops below its factory-trimmed or adjustable thresholds, or if the MR is asserted to logic low, the reset output RST is asserted (driven low). Once asserted, RST is maintained low for a minimum delay period (tREC) after ALL monitored supplies rise above their respective thresholds and MR returns to high. The reset output logic state is valid for VCC greater than 0.8 V. The STM6905 is available in a standard 8-lead MSOP (TSSOP) package. Figure 1. Logic diagram VCC V2IN V3IN STM6905 V4IN RST V5IN MR VSS ai13970 Figure 2. MSOP/TSSOP-8 connections MR 1 8 RST VCC 2 7 V5IN V2IN 3 6 V4IN VSS 4 5 V3IN ai13971 DocID14290 Rev 4 5/19 18 Description STM6905 Table 2. Signal names and functions 6/19 Pin Name Type 1 MR Input 2 VCC Supply 3 V2IN Input 4 VSS Supply 5 V3IN 6 V4IN 7 V5IN 8 RST Function Active-low manual reset input with internal pull-up resistor Primary supply voltage input and integrated fixed threshold undervoltage monitor Second fixed threshold input monitor Ground Adjustable third reset comparator input Input Adjustable fourth reset comparator input Adjustable fifth reset comparator input Output Active-low open-drain reset output (10 kΩ internal pull-up) DocID14290 Rev 4 STM6905 Pin descriptions 2 Pin descriptions 2.1 Push-button reset input (MR) When MR goes low the RST output is driven low. RST remains low as long as MR is low and for the tREC after MR returns to high. The active-low input has an internal 10 kΩ pull-up resistor to VCC. It can be driven from a TTL or CMOS logic line, or with open drain/collector outputs, or connected to VSS through a switch. If unused, leave this pin open or connect it to VCC. Connect a normally open momentary switch from MR to VSS. An external debounce circuitry is not required (if MR is driven from long cables or if the device is used in noisy environments, connecting a 0.1 µF capacitor from MR to VSS provides additional noise immunity). 2.2 VCC primary supply voltage monitoring input The VCC pin is also the input for the primary reset threshold monitor. Fixed (customerselectable, factory programmed) reset thresholds include 3.078 V to 2.866 V. 2.3 V2IN second fixed voltage monitoring input The V2IN input is the second fixed-voltage input for reset threshold monitoring. Available fixed (customer-selectable, factory programmed) reset thresholds include 2.333 V to 1.050 V. 2.4 VSS This pin is the ground pin for the power supply. 2.5 V3IN, V4IN, and V5IN The V3IN, V4IN and V5IN are high impedance inputs. RST is driven low when the voltage (VTRIP) at the pin falls below 600 mV (internal reference voltage at their respective comparators). The monitored voltage reset threshold is set with an external resistor-divider network. 2.6 RST active-low, open drain reset output The reset output (RST) pin is driven low and stays low whenever VCC or V2IN, or V3IN, or V4IN, or V5IN falls below its factory-trimmed or adjustable reset threshold or when MR goes to logic low. It remains low for tREC after all supply voltages being monitored rise above their reset thresholds and MR goes from low to high. Connect an external pull-up resistor to VCC. A 10 kΩ pull-up resistor should be sufficient for most applications. DocID14290 Rev 4 7/19 18 Pin descriptions STM6905 Figure 3. Functional block diagram VCC VRST1 COMPARE VRST2 COMPARE V2IN V3IN VREF = 0.6V COMPARE VREF = 0.6V COMPARE VREF = 0.6V COMPARE trec Generator RST V4IN V5IN VCC (1) MR ai13970 1. Internal pull-up on MR input of 10 kΩ (typ). Figure 4. Typical hardware hookup application diagram From DC/DC Converter VCC2 V TRIP = (600mV) VTRIP = (600mV) V TRIP = (600mV) ( R1R2+ R2 ) ( R3R4+ R4 ) ( R5R6+ R6 ) VCC1 VCC 0.1 F STM6905 VIN2 VCC3 0.1 F RST RST (To Processor Reset) R1 VIN3 VCC4 R2 R3 MR VIN4 Push-button Switch VCC5 R4 R5 VIN5 R6 VSS ai13973 8/19 DocID14290 Rev 4 STM6905 3 Operation Operation The STM6905 can monitor critical voltages such as power-supply and battery voltage levels, while interfacing easily with the system controllers/microprocessors. Figure 4 shows the typical hardware hookup for monitoring five voltages: two fixed thresholds (customer-selectable, factory-programmed) and three adjustable monitor inputs. The RST output is open drain and requires a 10 kΩ pull-up resistor tied to VCC. 3.1 Setting the adjustable voltage levels for V3IN, V4IN, and V5IN inputs The user can customize the minimum voltage levels for the three adjustable voltage inputs by connecting an external resistor divider network to the V3IN, V4IN and V5IN pins in order to set the trip point at some voltage above the 600 mv (VREF) according to the following formula. R1 + R2 VTRIP = 0.6 V × ---------------------R2 During normal operation, the STM6905 monitors the voltage levels at all five pins (Vcc, V2IN, V3IN, V4IN, and V5IN). 3.2 Power on reset (tREC) On power up, the STM6905 activates a power-on reset circuit which asserts the reset pin (i.e. RST goes low). The RST signal remains active until VCC (and V2IN, V3IN, V4IN, V5IN, and MR) rises above the minimum voltage level for the time period tREC thereby ensuring that the supply voltage has stabilized to sufficient operating levels. DocID14290 Rev 4 9/19 18 Voltage monitoring 4 STM6905 Voltage monitoring Figure 5. MR timing waveforms tMLMH MR tMLMR RST tREC ai13974 Figure 6. Voltage monitoring diagram VCC, VXIN VRST1/2, VRSTIN tRD trec RST ai13975 10/19 DocID14290 Rev 4 STM6905 5 Maximum rating Maximum rating Stressing the device above the ratings listed in the “Absolute maximum ratings” table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the Operating sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE program and other relevant quality documents. Table 3. Absolute maximum ratings Symbol TSTG TSLD(1) 1. Parameter Storage temperature (VCC off) Lead solder temperature for 10 seconds Value -55 to +150 260 Unit °C VIO Input or output voltage VCC Supply voltage -0.3 to 7.0 IO Output current 20 mA θJA Thermal resistance (junction to ambient) 146 °C/W -0.3 to VCC +0.3 V Reflow at peak temperature of 255 °C to 260 °C for < 30 seconds (total thermal budget not to exceed 180 °C for between 90 to 150 seconds). DocID14290 Rev 4 11/19 18 DC and AC parameters 6 STM6905 DC and AC parameters This section summarizes the operating measurement conditions and the DC and AC characteristics of the device. Designers should check that the operating conditions in their circuit match the operating conditions when relying on the quoted parameters. Table 4. DC and AC characteristics Symbol Alternative Description VCC Operating voltage ICC VCC supply current I2IN V2IN supply current ILI ILO(3) VTH1 5.5 V 16 VCC = 3.3 V 11 15 V2IN = 3.3 V 3 5 µA VIN = VCC or VSS -0.5 +0.5 Open drain RST output leakage current VCC > VRST, RST not asserted -0.5 +0.5 VCC ≥ 0.8 V, ISINK = 1 µA 0.3 VCC ≥ 1.0 V, ISINK = 50 µA 0.3 VCC ≥ 1.2 V, ISINK = 100 µA 0.3 VCC ≥ 2.7 V, ISINK = 1.2 mA 0.3 VCC ≥ 4.5 V, ISINK = 3.2 mA 0.4 VCC reset threshold S (falling) Y (falling) V2IN reset threshold W (falling) G (falling) F (falling) 12/19 Unit 12 Z (falling) VTH2 Max VCC < 5.5 V P (falling) VRST2(4) Typ 0.8 T (falling) VRST1(4) Min Input leakage current (MR)(2) Output low voltage (RST, open drain) VOL Test condition(1) 25°C 3.047 -40 °C to 85 °C 3.023 25 °C 2.925 -40 °C to 85 °C 2.902 25 °C 2.837 -40 °C to 85 °C 2.814 25 °C 2.310 -40 °C to 85 °C 2.291 25 °C 2.166 -40 °C to 85 °C 2.149 25 °C 1.666 -40 °C to 85 °C 1.653 25 °C 1.099 -40 °C to 85 °C 1.090 25 °C 1.040 -40 °C to 85 °C 1.031 DocID14290 Rev 4 3.078 3.109 3.133 2.955 2.985 3.008 2.866 2.895 2.918 2.333 2.356 2.375 2.188 2.210 2.227 1.683 1.700 1.713 1.110 1.121 1.130 1.050 1.061 1.069 V STM6905 DC and AC parameters Table 4. DC and AC characteristics (continued) Symbol Alternative Reset threshold hysteresis VHYST tRD tREC Description VCC to RST delay tRP RST time-out period Test condition(1) Min Typ Referenced to VRST1/VRST2 typical 0.5 VCC = (VRST1 + 100 mV) to (VRST1 – 100 mV) 20 V2IN = (VRST2 + 75 mV) to (VRST2 – 75 mV) 20 Max Unit % µs Option B(5) 20 30 40 C(5) 80 120 180 Option E 140 210 280 Option F(5) 280 420 560 589 600 611 mV +25 nA Option ms Adjustable reset comparator input (V3IN, V4IN, V5IN) VRSTIN V3IN, V4IN, V5IN input threshold IRSTIN V3IN, V4IN, V5IN input current V3IN, V4IN, V5IN > 0.8 V –25 V3IN, V4IN, V5IN hysteresis V3IN, V4IN, V5IN to RST output delay tRSTIND VRSTIN to (VRSTIN – 30 mV) 3 mV 22 µs Manual (push-button) reset input VIL 0.3 x VCC MR input voltage VIH V 0.7 x VCC tMLMH tMR MR minimum pulse width tMLRL tMRD MR to RST output delay 200 MR glitch immunity 100 MR pull-up resistance 10 1 µs ns kΩ 1. Valid for ambient operating temperature: TA = –40 °C to +85 °C; VCC = 0.8 V to 5.5 V (except where noted). 2. 10 kΩ (typ) internal pull-up resistor. 3. The leakage current measured on the RST pin is tested with the reset de-asserted (output high impedance). 4. Other reset threshold voltages are offered. Minimum order quantities may apply. Contact local sales office for availability. 5. Other tREC time-out periods are offered. Minimum order quantities may apply. Contact local sales office for availability. DocID14290 Rev 4 13/19 18 Package information 7 STM6905 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 14/19 DocID14290 Rev 4 STM6905 Package information Figure 7. TSSOP8 3 mm x 3 mm, package mechanical outline D 8 5 c E1 1 E 4 k A1 A L L2 A2 L1 ccc b e E3_ME Table 5. TSSOP8 3 mm x 3 mm, package mechanical data mm inches Symbol Min Typ A Min Typ 1.100 A1 0.00 A2 0.75 b c Max 0.043 0.15 0.000 0.95 0.030 0.22 0.40 0.009 0.016 0.08 0.23 0.003 0.009 0.85 ccc D Max 0.006 0.034 0.10 2.80 e 3.00 3.20 0.037 0.004 0.110 0.65 0.118 0.126 0.026 E 4.65 4.90 5.15 0.183 0.193 0.203 E1 2.80 3.00 3.10 0.110 0.118 0.122 L 0.40 0.60 0.80 0.016 0.024 0.032 L1 0.95 0.037 L2 0.25 0.010 k N 0° 4 6° 8 DocID14290 Rev 4 0° 4 6° 8 15/19 18 Part numbering 8 STM6905 Part numbering Table 6. Ordering information scheme Example: STM6905 TZ E DS 6 Device type STM6905 Reset threshold voltages(1) Suffix VRST1 VRST2 TZ 3.078 2.333 TW 3.078 1.683 TG 3.078 1.110 SY 2.955 2.188 SF 2.955 1.050 PW 2.866 1.683 tREC B = 30 ms(1) C = 120 ms(1) E = 210 ms F = 420 ms(1) Package DS = MSOP8 (TSSOP8) Temperature range 6: -40 °C to 85 °C Shipping method E = ECOPACK® package, tubes F = ECOPACK® package, tape and reel 1. Other reset threshold voltages and tREC time-out periods are offered. Minimum order quantities may apply. Contact local sales office for availability. 16/19 DocID14290 Rev 4 F STM6905 9 Package marking information Package marking information Table 7. Marking description Part marking VRST1 (V) STM6905TZEDS6F STM6905TWEDS6F 3.078 STM6905TGEDS6F STM6905SYEDS6F STM6905SFEDS6F STM6905PWEDS6F VRST2 (V) 2.866 Topside marking 2.333 STZE 1.683 STWE 1.110 2.955 Package 2.188 MSOP (TSSOP8) STGE SSYE 1.050 SSFE 1.683 SPWE DocID14290 Rev 4 17/19 18 Revision history 10 STM6905 Revision history Table 8. Document revision history 18/19 Date Revision Changes 19-Dec-2007 1 Initial release. 23-Jan-2008 2 Document status upgraded to full datasheet. 28-Jan-2008 3 Updated cover page, Figure 6, and Table 4. 20-Oct-2014 4 Small text changes to English Table 1: updated footnote 1 Table 6: updated the reset threshold voltage of “SY” (VRST2) DocID14290 Rev 4 STM6905 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2014 STMicroelectronics – All rights reserved DocID14290 Rev 4 19/19 19