STM8L1526-EVAL

STM8L1526-EVAL STM8L1526-EVAL evaluation board Data brief Features • Three 5 V power supply options: power jack, ST-LINK USB connector or daughterboard • Audio speaker and microphone connected to the DAC and ADC of the STM8L152C6 • 1 Gbyte or more SPI interface microSD CardTM • 128 Mbit SPI serial Flash • I2C compatible serial interface 64 Kbit EEPROM and SMBusTemperature sensor • RS-232 communication • IrDA transceiver • Inductor motor control connector • SWIM debug support, ST-LINK embedded • 122x32 dot matrix LCD connected to the SPI interface of the STM8L152C6 • Joystick with 4-direction control and selector • Reset and User button • 4 color LEDs and one bicolor LED • MCU consumption measurement circuit • LCD glass 28 x 4 segments (7 digits alpha numeric) connected to the LCD driver inside the STM8L152C6 • Extension connector for daughterboard or wrapping board • MCU voltage choice 3.3 V or adjustable from 1.65 V to 3.6 V Flash, microSD Card, temperature sensor and EEPROM… etc.) and develop your own applications. • STice connector footprint Extension headers facilitate easy connection of a daughterboard or wrapping board for specific applications. Description An ST-LINK is integrated on the board as the embedded in-circuit debugger and programmer. The STM8L1526-EVAL evaluation board is a complete demonstration and development platform for STMicroelectronic's STM8 corebased STM8L152C6 microcontroller. The full range of hardware features on the board helps you evaluate all peripherals (motor control, USART, audio DAC, LCD, IR LED, IrDA, SPI January 2014 Table 1. Device summary Order code STM8L1526-EVAL(1) STM8L152C6 evaluation board 1. STM8L1526-EVAL is replaced by STM8L1528-EVAL evaluation board. DocID17808 Rev 2 For further information contact your local STMicroelectronics sales office. Reference 1/3 www.st.com Demonstration software STM8L1526-EVAL Demonstration software Demonstration software is preloaded in the board’s Flash memory for easy demonstration of device peripherals in stand-alone mode. For more information and to download the latest version available, please refer to the STM8L1526-EVAL demonstration firmware available on www.st.com. Revision history Table 2. Document revision history 2/3 Date Revision Changes 09-Aug-2010 1 Initial release. 24-Jan-2014 2 Updated Table 1 : note added. DocID17808 Rev 2 STM8L1526-EVAL Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2014 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com DocID17808 Rev 2 3/3 3