STP16CL596B1R

STP16CL596 Low voltage 16-Bit, constant current LED sink driver Features ■ Low voltage power supply down to 3V ■ 16 constant current output channels ■ Adjustable output current through external resistor ■ Serial data IN/parallel data OUT ■ Serial OUT changes state on the falling edges of clock ■ 3.3V micro driver-able ■ Output current: 15-90mA ■ 25Mhz clock freqrequency ■ available in high thermal efficiency TSSOP exposed pad TSSOP24 TSSOP24 (exposed pad) ) s t( o r P Through an external resistor, users may adjust the STP16CL596 output current, controlling in this way the light intensity of LEDs. e t le The STP16CL596 guarantees a 16V output driving capability, allowing users to connect more LEDs in series. The high clock frequency, 25MHz, also satisfies the system demand for high volume data transmission, the 3.3V of voltage supply is well useful for applications that interface any micro from 3.3V. o s b O - The STP16CL596 is a monolithic, mediumvoltage, low current power 16-bit shift register designed for LED panel displays. The device contains a 16-bit serial-IN, parallelOUT shift register that feeds a 16-bit, D-type storage register. In the output stage, sixteen regulated current sources are designed to provide 15-90mA constant current to drive the LEDs. u d o SO-24 c u d Description ) s ( ct DIP-24 The serial output change state on the falling edges of clock, this special feature will provide an improved performance of the application when the clock signal is skewed because the daisy chain is too long. Compared with a standard TSSOP package, the TSSOP exposed pad increases heat dissipation capability by a 2.5 factor. r P e t e l o s b O Order Codes Part Number Package Packaging STP16CL596B1R DIP-24 15 parts per tube STP16CL596M SO-24 (Tube) 40 parts per tube STP16CL596MTR SO-24 (Tape & Reel) 1000 parts per reel STP16CL596TTR TSSOP24 (Tape & Reel) 2500 parts per reel STP16CL596XTTR TSSOP24 Exposed-Pad (Tape & Reel) 2500 parts per reel July 2006 Rev 10 1/24 www.st.com 24 STP16CL596 Contents Contents 1 Summary description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 2 Pin connection and description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 Equivalent circuit of inputs and outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Truth table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.2 Timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3.1 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3.2 Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 c u d ) s t( 4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5 Switching characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 7 Typical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 8 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 e t le ) s ( ct u d o r P e t e l o s b O 2/24 o r P o s b O - STP16CL596 1 Summary description Summary description Table 1. Current accuracy Current accuracy Output voltage Output current Between bits Between ICs ± 3% ± 10% ≥ 0.7V 1.1 15 to 90mA Pin connection and description Figure 1. Connections diagram c u d e t le ) s ( ct ) s t( o r P o s b O - u d o Note: r P e The Exposed-Pad is electrically not connected Table 2. s b O t e l o Pin description PIN N° Symbol Name and function 1 GND Ground terminal 2 SDI Serial data input terminal 3 CLK Clock input terminal 4 LE Latch input terminal 5-20 OUT 0-15 21 OE 22 SDO 23 R-EXT 24 VDD Output terminal Input terminal of output enable (active low) Serial data out terminal Input terminal of an external resistor for constant current programing Supply voltage terminal 3/24 STP16CL596 Equivalent circuit of inputs and outputs 2 Equivalent circuit of inputs and outputs Figure 2. OE terminal Figure 3. LE terminal c u d e t le Figure 4. u d o CLK, SDI terminal r P e t e l o s b O 4/24 ) s ( ct o s b O - o r P ) s t( STP16CL596 Equivalent circuit of inputs and outputs Figure 5. SDO terminal Figure 6. Block diagram - normal mode c u d e t le ) s ( ct ) s t( o r P o s b O - u d o r P e t e l o s b O 5/24 STP16CL596 Equivalent circuit of inputs and outputs 2.1 Truth table Table 3. Clock Truth table LE OE SERIAL-IN OUT0 .................. OUT7 .................. OUT15 H L Dn Dn ..... Dn -7 ..... Dn -15 Dn -15 L L Dn + 1 No Change Dn -14 H L Dn + 2 Dn -2 ..... Dn -5 ..... Dn -13 Dn -13 X L Dn + 3 Dn -2 ..... Dn -5 ..... Dn -13 Dn -13 X L Dn + 3 ON Dn -13 Note: OUT0 to OUT15 = ON when Dn = H; OUT0 to OUT15 = OFF when Dn = L. 2.2 Timing diagram Figure 7. c u d Timing diagram - normal mode e t le ) s ( ct SDO ) s t( o r P o s b O - u d o r P e t e l o s b O Note: Note: The latches circuit holds data when the LE terminal is Low. When the LE terminal is at High level, latch circuit doesn’t hold the data it passes from the input to the output. When the OE terminal is at Low level, output terminals OUT0 to OUT15 respond to the data, either ON or OFF. When the OE terminal is at High level, it switches off all the data on the output terminal. 6/24 STP16CL596 Equivalent circuit of inputs and outputs Figure 8. Clock, Serial-In, Serial-Out c u d Figure 9. Clock, Serial-In, Latch, Enable, Outputs ) s ( ct e t le ) s t( o r P o s b O - u d o r P e t e l o s b O 7/24 STP16CL596 Equivalent circuit of inputs and outputs Figure 10. Outputs c u d e t le ) s ( ct u d o r P e t e l o s b O 8/24 o s b O - o r P ) s t( STP16CL596 3 Maximum rating Maximum rating Stressing the device above the rating listed in the “Absolute Maximum Ratings” table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the Operating sections of this specification is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and other relevant quality documents. 3.1 Table 4. Absolute maximum ratings Symbol Parameter Value Unit VDD Supply voltage 0 to 7 V VO Output voltage -0.5 to 16 V IO Output current 90 mA VI Input voltage -0.4 to VDD+0.4 IGND GND terminal current fCLK Clock frequency TOPR Operating temperature range TSTG Storage temperature range Thermal data (s) Parameter RthJA Thermal resistance junction-ambient t c u e t le o s b O - Symbol d o r P e od 25 Thermal data Table 5. uc 1440 Pr ) s t( V mA MHz -40 to +125 °C -65 to +150 °C DIP-24 SO-24 TSSOP-24 TSSOP-24(1) (exposed pad) Unit 60 75 85 37.5 °C/W 1. The Exposed-Pad should be soldered to the PBC to realize the thermal benefits t e l o s b O 9/24 STP16CL596 Maximum rating 3.2 Recommended operating conditions Table 6. Symbol Recommended operating conditions Parameter Test conditions Max. Unit 3.0 3.3 3.6 V 16.0 V 90 mA Supply voltage VO Output voltage IO Output current OUTn IOH Output current SERIAL-OUT +1 mA IOL Output current SERIAL-OUT -1 mA VIH Input voltage 0.7VDD VDD+0.3 V VIL Input voltage -0.3 0.3VDD V 5 twLAT LE pulse width 20 twCLK CLK pulse width 20 twEN OE pulse width 20 Pr 15 tSETUP(L) Setup time for LATCH 15 1. ns e t le Cascade operation (1) Clock frequency o s b O - ) s t( ns uc 400 VDD = 3.0 to 3.6V tHOLD(D) Hold time for DATA fCLK od u d o r P e t e l o ns ns ns ns 25 If the device is connected in cascade, it may not be possible achieve the maximum data transfer. Please considered the timings carefully. ) s ( ct 10/24 Typ. VDD tSETUP(D) Setup time for DATA s b O Min. MHz STP16CL596 4 Electrical characteristics Electrical characteristics Table 7. Electrical characteristics (VDD = 3.3V, T = 25°C, unless otherwise specified.) Symbol Parameter Test conditions Min. Typ. Max. Unit VIH Input voltage high level 0.7VDD VDD V VIL Input voltage low level GND 0.3VDD V IOH Output leakage current VOH = 16V 10 µA VOL Output voltage (Serial-OUT) IOL = 1mA 0.4 V VOH Output voltage (Serial-OUT) IOH = -1mA IOL1 Output current IOL2 ∆IOL1 ∆IOL2 RSIN(up) Output current error between bit (All Output ON) VDD0.4V VO = 0.7V REXT = 910Ω 19.2 20.6 VO = 0.7V REXT = 360Ω 46.2 50.2 ±4 % 300 600 KΩ 200 400 KΩ REXT = OPEN OUT 0 to 15 = OFF 0.3 0.6 REXT = 470Ω OUT 0 to 15 = OFF 5.5 7.7 REXT = 250Ω OUT 0 to 15 = OFF 10.1 14.1 REXT = 470Ω OUT 0 to 15 = ON 5.5 7.7 REXT = 250Ω OUT 0 to 15 = ON 10.1 14.1 ±4 IDD(OFF3) ) s ( ct IDD(ON1) u d o c u d VO = 0.7V REXT = 360Ω ro 150 Supply current (OFF) mA ±3 VO = 0.7V REXT = 910Ω P e let RSIN(down) Pull-down resistor IDD(OFF2) 22.0 ) s t( Pull-up resistor IDD(OFF1) V 100 o s b O - 54.2 mA ±5 % mA Supply current (ON) IDD(ON2) r P e t e l o s b O 11/24 STP16CL596 Switching characteristics 5 Switching characteristics Table 8. Switching characteristics (VDD = 3.3V, T = 25°C, unless otherwise specified.) Symbol Parameter tPLH1 Typ. Max. Unit Propagation delay time, CLK-OUTn, LE = H, OE = L 250 280 ns tPLH2 Propagation delay time, LE-OUTn, OE = L 220 250 ns tPLH3 Propagation delay time, OE-OUTn, LE = H 200 250 ns tPLH Propagation delay time, CLK-SDO 25 50 ns tPHL1 Propagation delay time, CLK-OUTn, LE = H, OE = L 25 50 ns tPHL2 Propagation delay time, LE-OUTn, OE = L tPHL3 Propagation delay time, OE-OUTn, LE = H tPHL Propagation delay time, CLK-SDO tr Output rise time tf Output fall time Test Conditions VDD = 3.3V Min. VIL = GND IO = 40mA REXT = 470Ω VIH = VDD CL = 13pF VL = 3V RL = 65Ω 25 50 ) s t( ns 50 70 ns 25 50 ns 200 250 ns 17 25 ns c u d e t le so b O - o r P Note: 1 To prevent current overshoot, during the Outputs switching, the overhead output voltage must be less than 1V ) s ( ct 2 The Maximum suggested swithching frequency is up tp 10KHz u d o r P e t e l o s b O 12/24 STP16CL596 6 Test circuit Test circuit Figure 11. DC characteristics c u d Figure 12. AC characteristics ) s ( ct e t le ) s t( o r P o s b O - u d o r P e t e l o s b O 13/24 STP16CL596 Typical characteristics 7 Typical characteristics Figure 13. Output current-REXT resistor Figure 14. Power dissipation vs temperature package c u d e t le Figure 15. Output current vs drop voltage ) s ( ct u d o r P e t e l o s b O 14/24 o s b O - o r P ) s t( STP16CL596 Typical characteristics Figure 16. Blue powerLED application circuit c u d e t le ) s ( ct ) s t( o r P o s b O - u d o r P e t e l o s b O 15/24 STP16CL596 Package mechanical data 8 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. c u d e t le ) s ( ct u d o r P e t e l o s b O 16/24 o s b O - o r P ) s t( STP16CL596 Table 9. Package mechanical data Plastic DIP-24 (0.25) mechanical data mm inch Ref Min Typ A Max Min Typ Max A1 4.32 0.38 0.170 0.015 A2 3.3 0.130 B 0.41 0.46 0.51 0.016 0.018 0.020 B1 1.40 1.52 1.65 0.055 0.060 0.065 c 0.20 0.25 0.30 0.008 0.010 0.012 D 31.62 31.75 31.88 1.245 1.250 1.255 E 7.62 8.26 0.300 E1 6.35 6.86 0.250 6.60 0.325 0.260 0.270 ) s t( e 2.54 0.100 E1 7.62 0.300 L 3.18 3.43 0.125 M 0° 15° 0° r P e t le Figure 17. Plastic DIP-24 (0.25) Package dimensions ) s ( ct od uc 0.135 15° o s b O - u d o r P e t e l o s b O 17/24 STP16CL596 Package mechanical data Table 10. TSSOP24 Mechanical data mm inch Ref Min Typ A Max Min Typ Max A1 1.1 0.05 0.15 A2 0.043 0.002 0.9 0.006 0.035 b 0.19 0.30 0.0075 0.0118 c 0.09 0.20 0.0035 0.0079 D 7.7 7.9 0.303 0.311 E 4.3 4.5 0.169 0.177 e 0.65 BSC 0.0256 BSC H 6.25 6.5 0.246 K 0° 8° 0° L 0.50 0.70 0.020 0.256 c u d Figure 18. TSSOP24 Package dimensions e t le ) s ( ct u d o r P e t e l o s b O 18/24 o s b O - ) s t( 8° o r P 0.028 STP16CL596 Table 11. Package mechanical data Tape & Reel TSSOP24 mm inch Ref Min Typ A Max Min Typ Max 330 13.2 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 0.504 0.519 22.4 0.882 Ao 6.8 7 0.268 0.276 Bo 8.2 8.4 0.323 0.331 Ko 1.7 1.9 0.067 0.075 Po 3.9 4.1 0.153 0.161 P 11.9 12.1 0.468 Figure 19. Reel dimensions c u d e t le ) s ( ct ) s t( 0.476 o r P o s b O - u d o r P e t e l o s b O 19/24 STP16CL596 Package mechanical data Table 12. SO-24 Mechanical Data mm inch Ref Min Typ A Max Min Max 2.65 a1 0.1 0.104 0.2 a2 0.004 0.008 2.45 0.096 b 0.35 0.49 0.014 0.019 b1 0.23 0.32 0.009 0.012 C 0.5 0.020 c1 45°(typ.) D 15.20 15.60 0.598 0.614 E 10.00 10.65 0.393 0.419 e 1.27 0.050 e3 13.97 0.550 F 7.40 7.60 0.291 L 0.50 1.27 0.020 S r P e t le °(max.) 8 Figure 20. SO-24 Package dimensions ) s ( ct u d o r P e t e l o s b O 20/24 Typ o s b O - od uc ) s t( 0.300 0.050 STP16CL596 Table 13. Package mechanical data Tape & Reel SO-24 mm inch Ref Min Typ A Max Min Typ Max 330 13.2 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 0.504 0.519 30.4 1.197 Ao 10.8 11.0 0.425 0.433 Bo 15.7 15.9 0.618 0.626 Ko 2.9 3.1 0.114 0.122 Po 3.9 4.1 0.153 0.161 P 11.9 12.1 0.468 Figure 21. Reel dimensions c u d e t le ) s ( ct ) s t( 0.476 o r P o s b O - u d o r P e t e l o s b O 21/24 STP16CL596 Package mechanical data Table 14. TSSOP24 Exposed-pad mm inch Ref Min Typ Max A 1.2 A1 0.15 A2 0.8 b 1 Min Max 0.047 0.004 0.006 0.039 0.041 1.05 0.031 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 D 7.7 7.9 0.303 7.8 D1 2.7 0.307 0.311 0.260 0.106 E 6.2 6.4 6.6 0.244 0.252 E1 4.3 4.4 4.5 0.169 0.173 E2 1.5 e 0.65 K 0° L 0.45 0.60 0° 0.75 0.018 e t le ) s ( ct u d o r P e t e l o s b O c u d 0.0256 8° o s b O - o r P 0.024 ) s t( 0.177 0.059 Figure 22. TSSOP24 dimensions 22/24 Typ 8° 0.030 STP16CL596 9 Revision history Revision history Table 15. Revision history Date Revision Change 06-May-2004 4 Table 6 and Table 7 parameters changed 03-Aug-2004 5 Figure 14 - pag. 10 is changed. 31-Mar-2005 6 Mistake on Fig. 7. 02-May-2005 7 Typing Error on the description features. 22-Jul-2005 8 Add note on Fig. 1 and Table 5. 16-May-2006 9 New template, few updates 26-Jul-2006 10 Block diagram Figure 6 on page 5 and Section 2: Equivalent circuit of inputs and outputs on page 4 c u d e t le ) s ( ct ) s t( o r P o s b O - u d o r P e t e l o s b O 23/24 STP16CL596 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. ) s t( Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. c u d No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. e t le o r P UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. o s b O - UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. ) s ( ct u d o Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. r P e t e l o ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. bs The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. O © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 24/24