STP16NF25

STD16NF25, STF16NF25 Datasheet N-channel 250 V, 0.195 Ω typ., 14 A STripFET™ II Power MOSFETs in DPAK and TO-220FP packages Features Order code STD16NF25 STF16NF25 • • • VDS RDS(on) max. ID 250 V 0.235 Ω 14 A Package DPAK TO-220FP Exceptional dv/dt capability 100% avalanche tested Low gate charge D(2, TAB) Applications • Switching applications G(1) Description S(3) AM01475v1_noZen These Power MOSFETs have been developed using STMicroelectronics’ unique STripFET process, which is specifically designed to minimize input capacitance and gate charge. This renders the devices suitable for use as primary switch in advanced high-efficiency isolated DC-DC converters for telecom and computer applications, and applications with low gate charge driving requirements. Product status link STD16NF25 STF16NF25 DS5532 - Rev 5 - January 2019 For further information contact your local STMicroelectronics sales office. www.st.com STD16NF25, STF16NF25 Electrical ratings 1 Electrical ratings Table 1. Absolute maximum ratings Symbol Parameter Value DPAK TO-220FP Unit VDS Drain-source voltage 250 V VGS Gate-source voltage ±20 V ID Drain current (continuous) at TC = 25 °C ID Drain current (continuous) at TC = 100 °C IDM (2) PTOT dv/dt (3) VISO Tj Tstg 14 14 (1) A 8.8 8.8 (1) A Drain current (pulsed) 56 56(1) A Total power dissipation at TC = 25 °C 85 25 W Peak diode recovery voltage slope 15 V/ns Insulation withstand voltage (RMS) from all three leads to external heat sink (t = 1 s; TC = 25°C) 2.5 Operating junction temperature range -55 to 150 Storage temperature range kV °C 1. Limited by maximum junction temperature. 2. Pulse width limited by safe operating area. 3. ISD ≤ 13 A, di/dt ≤ 300 A/µs, VDD = 80% V(BR)DSS, Tj ≤ TJMAX. Table 2. Thermal data Symbol Parameter Value DPAK TO-220FP 5 Rthj-case Thermal resistance junction-case 1.47 Rthj-pcb (1) Thermal resistance junction-pcb 50 Rthj-amb Unit °C/W Thermal resistance junction-ambient 62.5 1. When mounted on FR-4 board of 1 inch², 2 oz Cu. Table 3. Avalanche characteristics Symbol Parameter Value Unit IAR (1) Avalanche current, repetitive or not-repetitive 13 A EAS (2) Single pulse avalanche energy 100 mJ 1. Pulse width limited by Tjmax. 2. Starting Tj = 25°C, ID = IAR, VDD = 50 V. DS5532 - Rev 5 page 2/22 STD16NF25, STF16NF25 Electrical characteristics 2 Electrical characteristics (TCASE = 25 °C unless otherwise specified) Table 4. On/off states Symbol V(BR)DSS Parameter Drain-source breakdown voltage Test conditions VGS = 0 V, ID = 1 mA Min. Typ. Max. 250 Unit V VGS = 0 V, VDS = 250 V 1 µA VGS = 0 V, VDS = 250 V, TC = 125 °C (1) 10 µA ±100 nA 3 4 V 0.195 0.235 Ω Typ. Max. Unit - pF IDSS Zero gate voltage drain current IGSS Gate-body leakage current VDS = 0 V, VGS = ±20 V VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA RDS(on) Static drain-source on resistance VGS = 10 V, ID = 6.5 A 2 1. Defined by design, not subject to production test. Table 5. Dynamic Symbol Ciss Coss Parameter Test conditions Min. Input capacitance Output capacitance 680 VDS = 25 V, f = 1 MHz, VGS = 0 V - 125 Crss Reverse transfer capacitance Coss eq. (1) Equivalent output capacitance VGS = 0 V, VDS = 0 V to 200 V - 48 - pF RG Gate input resistance f = 1 MHz, ID = 0 A - 2.1 - Ω Qg Total gate charge VDD = 200 V, ID = 13 A, Qgs Gate-source charge VGS = 0 to 10 V - nC Gate-drain charge (see Figure 16. Test circuit for gate charge behavior) Qgd 20 18 - 3 9 1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDSincreases from 0 to 80% VDSS. Table 6. Switching times Symbol td(on) tr td(off) tr DS5532 - Rev 5 Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions Min. Max. Unit - ns 9 VDD = 125 V, ID = 6.5 A, RG = 4.7 Ω, VGS = 10 V (see Figure 15. Test circuit for resistive load switching times and Figure 20. Switching time waveform) Typ. - 17 35 17 page 3/22 STD16NF25, STF16NF25 Electrical characteristics Table 7. Source-drain diode Symbol Parameter Test conditions Min. Typ. Max. Unit ISD Source-drain current - 14 ISDM (1) Source-drain current (pulsed) - 56 VSD (2) Forward on voltage ISD = 13 A, VGS = 0 V - 1.6 trr Reverse recovery time ISD = 13 A, di/dt = 100 A/µs - 133 ns Qrr Reverse recovery charge - 651 nC IRRM Reverse recovery current VDD = 60 V (see Figure 17. Test circuit for inductive load switching and diode recovery times) - 10 A trr Reverse recovery time ISD = 13 A, di/dt = 100 A/µs - 157 ns Qrr Reverse recovery charge - 895 nC IRRM Reverse recovery current VDD = 60 V, Tj = 150 °C (see Figure 17. Test circuit for inductive load switching and diode recovery times) - 11 A A V 1. Pulse width is limited by safe operating area. 2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%. DS5532 - Rev 5 page 4/22 STD16NF25, STF16NF25 Electrical characteristics (curves) 2.1 Electrical characteristics (curves) Figure 1. Safe operating area for DPAK AM11291v1 ID (A) Figure 2. Thermal impedance for DPAK GC20460 K 100 10µs is ea ) a r on s DS ( i th R x in n ma tio by a r d e e p O im it L Tj=150°C 10 1 100µs 1ms 10 1 100 VDS (V) Figure 3. Safe operating area for TO-220FP AM11292v1 ID (A) is ea ) a r S (on is D th R in a x n io y m t b ra pe e d O im it L 10 1 0.01 0.1 1 10-4 10-3 10-2 10-1 tp (s) Figure 4. Thermal impedance for TO-220FP GC20940 10µs 100µs 10 -1 1ms 10ms 10 -2 10 100 VDS (V) Figure 5. Output characterisics DS5532 - Rev 5 10-2 10-5 K Tj=150°C Tc=25°C S ingle puls e 0.1 10-1 10ms Tc=25°C S ingle puls e 0.1 0.1 100 10 -3 10 -4 10 -3 10 -2 10 -1 10 0 t p (s) Figure 6. Transfer characteristics page 5/22 STD16NF25, STF16NF25 Electrical characteristics (curves) Figure 7. Normalized V(BR)DSS vs temperature Figure 8. Static drain-source on resistance Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations Figure 11. Normalized gate threshold voltage vs temperature Figure 12. Normalized on resistance vs temperature DS5532 - Rev 5 page 6/22 STD16NF25, STF16NF25 Electrical characteristics (curves) Figure 13. Source-drain diode forward characteristics DS5532 - Rev 5 Figure 14. Maximum avalanche energy vs temperature page 7/22 STD16NF25, STF16NF25 Test circuits 3 Test circuits Figure 15. Test circuit for resistive load switching times Figure 16. Test circuit for gate charge behavior VDD 12 V 2200 + μF 3.3 μF VDD VD VGS 1 kΩ 100 nF RL IG= CONST VGS RG 47 kΩ + pulse width D.U.T. 2.7 kΩ 2200 μF pulse width D.U.T. 100 Ω VG 47 kΩ 1 kΩ AM01469v1 AM01468v1 Figure 17. Test circuit for inductive load switching and diode recovery times D G A D.U.T. S 25 Ω A L A B B 3.3 µF D G + VD 100 µH fast diode B Figure 18. Unclamped inductive load test circuit RG 1000 + µF 2200 + µF VDD 3.3 µF VDD ID D.U.T. S D.U.T. Vi _ pulse width AM01471v1 AM01470v1 Figure 20. Switching time waveform Figure 19. Unclamped inductive waveform ton V(BR)DSS td(on) VD toff td(off) tr tf 90% 90% IDM VDD 10% 0 ID VDD AM01472v1 VGS 0 VDS 10% 90% 10% AM01473v1 DS5532 - Rev 5 page 8/22 STD16NF25, STF16NF25 Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DS5532 - Rev 5 page 9/22 STD16NF25, STF16NF25 DPAK (TO-252) type A package information 4.1 DPAK (TO-252) type A package information Figure 21. DPAK (TO-252) type A package outline 0068772_A_26 DS5532 - Rev 5 page 10/22 STD16NF25, STF16NF25 DPAK (TO-252) type A package information Table 8. DPAK (TO-252) type A mechanical data Dim. mm Min. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 4.95 E 6.40 E1 4.60 4.70 4.80 e 2.159 2.286 2.413 e1 4.445 4.572 4.699 H 9.35 10.10 L 1.00 1.50 (L1) 2.60 2.80 3.00 L2 0.65 0.80 0.95 L4 0.60 R V2 DS5532 - Rev 5 Typ. 5.10 5.25 6.60 1.00 0.20 0° 8° page 11/22 STD16NF25, STF16NF25 DPAK (TO-252) type C2 package information 4.2 DPAK (TO-252) type C2 package information Figure 22. DPAK (TO-252) type C2 package outline 0068772_type-C2_rev26 DS5532 - Rev 5 page 12/22 STD16NF25, STF16NF25 DPAK (TO-252) type C2 package information Table 9. DPAK (TO-252) type C2 mechanical data Dim. mm Min. Typ. Max. A 2.20 2.30 2.38 A1 0.90 1.01 1.10 A2 0.00 0.10 b 0.72 0.85 b4 5.13 c 0.47 0.60 c2 0.47 0.60 D 6.00 D1 5.10 E 6.50 E1 5.20 e 2.186 2.286 2.386 H 9.80 10.10 10.40 L 1.40 1.50 1.70 L1 L2 6.20 5.60 6.60 6.70 5.50 0.90 1.25 0.51 BSC 0.60 L6 DS5532 - Rev 5 6.10 5.46 2.90 REF L3 L4 5.33 0.80 1.00 1.80 BSC θ1 5° 7° 9° θ2 5° 7° 9° V2 0° 8° page 13/22 STD16NF25, STF16NF25 DPAK (TO-252) type C2 package information Figure 23. DPAK (TO-252) recommended footprint (dimensions are in mm) DS5532 - Rev 5 page 14/22 STD16NF25, STF16NF25 DPAK (TO-252) packing information 4.3 DPAK (TO-252) packing information Figure 24. DPAK (TO-252) tape outline 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 K0 For machine ref. only including draft and radii concentric around B0 W B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 DS5532 - Rev 5 page 15/22 STD16NF25, STF16NF25 DPAK (TO-252) packing information Figure 25. DPAK (TO-252) reel outline T 40mm min. access hole at slot location B D C N A G measured at hub Tape slot in core for tape start 2.5mm min.width Full radius AM06038v1 Table 10. DPAK (TO-252) tape and reel mechanical data Tape Dim. mm mm Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 DS5532 - Rev 5 Reel Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 18.4 22.4 page 16/22 STD16NF25, STF16NF25 TO-220FP package information 4.4 TO-220FP package information Figure 26. TO-220FP package outline 7012510_Rev_12_B DS5532 - Rev 5 page 17/22 STD16NF25, STF16NF25 TO-220FP package information Table 11. TO-220FP package mechanical data Dim. mm Min. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 DS5532 - Rev 5 Typ. 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 page 18/22 STD16NF25, STF16NF25 Ordering information 5 Ordering information Table 12. Order codes Order code STD16NF25 STF16NF25 DS5532 - Rev 5 Marking 16NF25 Package Packing DPAK Tape and reel TO-220FP Tube page 19/22 STD16NF25, STF16NF25 Revision history Table 13. Document revision history Date Version Changes 12-Oct-2007 1 Initial release. 13-Nov-2007 2 Modified: Figure 13: Capacitance variations. Figure 2: Safe operating area for TO-220, Figure 4: Safe operating area for TO-220FP and Figure 6: Safe operating area 29-Mar-2012 3 for DPAK have been updated. Section 4: Package mechanical data and Section 5: Packaging mechanical data have been updated. Minor text changes – Modified: PTOT, derating factor values, note 1 on Table 2, 06-Mar-2013 4 Rthj-case, Rthj-amb only for TO-220 and DPAK – Updated: Section 4: Package mechanical data – Minor text changes The part number STP16NF25 has been moved to a separate datasheet. 21-Jan-2019 5 Removed maturity status indication from cover page. The document status is production data. Updated Section 4 Package information. Minor text changes. DS5532 - Rev 5 page 20/22 STD16NF25, STF16NF25 Contents Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 5 4.1 DPAK (TO-252) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.2 DPAK (TO-252) type C2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.3 DPAK (TO-252) packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.4 TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 DS5532 - Rev 5 page 21/22 STD16NF25, STF16NF25 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2019 STMicroelectronics – All rights reserved DS5532 - Rev 5 page 22/22