STP270N8F7

STH270N8F7-2, STH270N8F7-6, STP270N8F7 Datasheet N-channel 80 V, 0.0017 Ω typ., 180 A STripFET F7 Power MOSFETs in an H²PAK-2, H²PAK-6 and TO-220 packages Features TAB TAB 1 Order codes 7 2 2 3 2 H PAK-2 1 STH270N8F7-2 H PAK-6 TAB STH270N8F7-6 1 TO-220 D(TAB) G(1) D(2, TAB) • Among the lowest RDS(on) on the market • • Excellent FoM (figure of merit) Low Crss/Ciss ratio for EMI immunity • High avalanche ruggedness • S(2, 3, 4, 5, 6, 7) 2 H PAK-2, H PAK-6 RDS(on) max. 0.0021 Ω ID 180 A 0.0025 Ω Applications G(1) 2 80 V STP270N8F7 3 2 VDS S(3) TO-220 H2PAK_2_6_N-CHG1DTABS234567_TO-220_N-CHG1D2TABS3 Switching applications Description These N-channel Power MOSFETs utilize STripFET F7 technology with an enhanced trench gate structure that results in very low on-state resistance, while also reducing internal capacitance and gate charge for faster and more efficient switching. Product status links STH270N8F7-2 STH270N8F7-6 STP270N8F7 DS9394 - Rev 5 - March 2021 For further information contact your local STMicroelectronics sales office. www.st.com STH270N8F7-2, STH270N8F7-6, STP270N8F7 Electrical ratings 1 Electrical ratings Table 1. Absolute maximum ratings Symbol Parameter Value Unit VDS Drain-source voltage 80 V VGS Gate-source voltage ±20 V Drain current (continuous) at TC = 25 °C 180 A Drain current (continuous) at Tc = 100 °C 180 A IDM (2) Drain current (pulsed) 720 A PTOT(3) Total power dissipation at TC = 25 °C 315 W EAS (4) Single pulse avalanche energy 1.16 J -55 to 175 °C ID (1) ID (1) Tj Operating junction temperature range Tstg Storage temperature range 1. Current limited by package. 2. Pulse width limited by safe operating area. 3. This value is rated according to RthJC 4. Starting Tj=25 °C, ID=65 A, VDD=50 V Table 2. Thermal data Symbol Parameter RthJC Thermal resistance, junction-to-case RthJB (1) Thermal resistance, junction-to-board RthJA Thermal resistance, junction-to-ambient Value H²PAK-2, H²PAK-6 TO-220 Unit °C/W 0.48 35 °C/W 62.5 °C/W 1. When mounted on an 1 inch² FR-4, 2 Oz copper board. DS9394 - Rev 5 page 2/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 Electrical characteristics 2 Electrical characteristics (TC = 25 °C unless otherwise specified) Table 3. On/off states Symbol V(BR)DSS IDSS IGSS VGS(th) Parameter Drain-source breakdown voltage Zero gate voltage drain current Gate-body leakage current Gate threshold voltage Test conditions ID = 250 µA, VGS = 0 V Min. Max. Unit 80 V VGS = 0 V, VDS = 80 V 10 µA VGS = 0 V, VDS = 80 V, TC=125 °C (1) 100 µA VGS = ±20 V, VDS = 0 V 100 nA 4.5 V VDS = VGS , ID = 250 μA 2.5 For H²PAK-2, H²PAK-6: RDS(on) Typ. Static drain-source VGS= 10 V, ID= 90 A on-resistance For TO-220: 0.0017 0.0021 Ω 0.0021 VGS= 10 V, ID= 90 A 0.0025 1. Defined by design, not subject to production test. Table 4. Dynamic Symbol Parameter Test conditions Min. Typ. Max. Unit - 13600 - pF - 2050 - pF - 236 - pF Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Qg Total gate charge VDD = 40 V, ID = 180 A, - 193 - nC Qgs Gate-source charge VGS = 0 to 10 V - 96 - nC Qgd Gate-drain charge (see Figure 20. Test circuit for gate charge behavior) - 46 - nC VDS = 50 V, f = 1 MHz, VGS = 0 V Table 5. Switching times Symbol td(on) tr td(off) tf DS9394 - Rev 5 Parameter Test conditions Min. Typ. Max. Unit Turn-on delay time VDD = 40 V, ID = 90 A, - 56 - ns Rise time RG = 4.7 Ω, VGS = 10 V (see Figure 19. Test circuit for resistive load switching times and Figure 24. Switching time waveform) - 180 - ns - 98 - ns - 42 - ns Turn-off delay time Fall time page 3/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 Electrical characteristics Table 6. Source-drain diode Symbol ISD ISDM (1) VSD(2) Parameter Test conditions Min. Typ. Max. Unit Source-drain current - 180 A Source-drain current (pulsed) - 720 A 1.2 V Source-drain curren ISD = 90 A, VGS = 0 V - trr Reverse recovery time ISD = 180 A, di/dt = 100 A/µs - 78 ns Qrr Reverse recovery charge - 182 nC IRRM Reverse recovery current VDD = 64 V, TJ = 150 °C (see Figure 21. Test circuit for inductive load switching and diode recovery times) - 4.7 A 1. Pulse width limited by safe operating area. 2. Pulsed: pulse duration=300 μs, duty cycle 1.5%. DS9394 - Rev 5 page 4/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 Electrical characteristics (curves) 2.1 Electrical characteristics (curves) Figure 1. Safe operating area for H²PAK-2 and H²PAK-6 AM15670v1 ID (A) is ea ar (on) s i DS th in ax R ion y m t a er d b Op ite Lim 100 10 Figure 2. Safe operating area for TO-220 AM15671v1 ID (A) is ea ar (on) s i DS th in ax R ion y m t a er d b Op ite Lim 100 100µs 10 100µs 1ms 1 10ms 1ms 1 10ms Tj=175°C Tc=25°C Single pulse Tj=175°C Tc=25°C Single pulse 0.1 0.1 10 1 0.1 0.1 VDS(V) Figure 3. Normalized transient thermal impedance AM15684v1 K d=0.5 VDS(V) Figure 4. Typical gate charge characteristics AM15683v1 VGS (V) VDD=40V ID=180A 12 0.2 10 1 10 0.1 8 0.1 0.05 0.02 0.01 6 4 Single pulse 0.01 10 -5 2 10 -4 10 -2 10 -3 t p (s) Figure 5. Typical output characteristics for TO-220 ID (A) 350 AM15673v1 VGS=8, 9, 10V 0 0 Figure 6. Typical transfer characteristics for TO-220 350 VDS=2V 300 250 200 200 150 150 6V 100 100 50 50 5V DS9394 - Rev 5 AM15709v1 ID (A) 250 0 200 Qg(nC) 150 100 7V 300 0 50 2 4 6 8 VDS(V) 0 0 1 2 3 4 5 6 7 8 9 VGS(V) page 5/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 Electrical characteristics (curves) Figure 7. Typical output characteristics for H²PAK-2 and H²PAK-6 ID (A) 350 AM15672v1 VGS=8, 9, 10V Figure 8. Typical transfer characteristics for H²PAK-2 and H²PAK-6 AM15682v1 ID (A) 350 7V VDS=2V 300 300 250 250 200 200 150 150 6V 100 100 50 50 0 5V 0 2 4 6 8 VDS(V) Figure 9. Normalized breakdown voltage vs temperature 2 3 4 5 7 6 8 9 VGS(V) Figure 10. Typical drain-source on-resistance for H²PAK-2 and H²PAK-6 AM15674v1 RDS(on) (mΩ) ID=1 mA 1.04 VGS=10V 1.74 1.02 1.72 1.00 1.70 0.98 1.68 0.96 -75 -50 -25 0 25 50 75 100 125 150 TJ (°C) 1.66 Figure 11. Typical drain-source on-resistance for TO-220 RDS(on) (mΩ) 1 AM15681v1 V(BR)DS S (norm) 0 0 AM15675v1 VGS=10V 2.20 0 20 40 60 80 100 120 140 160 180 ID(A) Figure 12. Typical capacitance characteristics C (pF) 16000 AM15676v1 14000 Ciss 12000 2.15 10000 8000 2.10 6000 4000 2.05 2000 2.00 DS9394 - Rev 5 0 20 40 60 80 100 120 140 160 180 ID(A) 0 0 10 20 30 40 50 60 Coss Crss VDS(V) page 6/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 Electrical characteristics (curves) Figure 13. Typical reverse diode forward characteristics AM15680v1 VSD (V) AM15677v1 VGS(th) (norm) 1.2 TJ=-50°C 1.0 ID=250µA 1.1 0.9 1.0 0.9 TJ=25°C 0.8 0.8 TJ=150°C 0.7 0.7 0.6 0.6 0.5 Figure 14. Normalized gate threshold vs temperature 0.5 0 20 40 60 80 100 120 140 160 ISD(A) Figure 15. Normalized on-resistance vs temperature for H²PAK-2 and H²PAK-6 AM15678v1 R DS (on) (norm) 2.0 0.4 -75 -50 -25 0 AM15679v1 R DS (on) 1.8 1.8 TJ(°C) Figure 16. Normalized on-resistance vs temperature for TO-220 (norm) ID=90 A VGS =10 V 25 50 75 100 125 150 ID=90 A VGS =10 V 1.6 1.6 1.4 1.4 1.2 1.2 1.0 1.0 0.8 0.8 0.6 0.6 0.4 -75 -50 -25 0 DS9394 - Rev 5 25 50 75 100 125 150 T J (°C) 0.4 -75 -50 -25 0 25 50 75 100 125 150 TJ (°C) page 7/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 Test circuits 3 Test circuits Figure 17. Test circuit for resistive load switching times Figure 18. Test circuit for gate charge behavior VDD 12 V 2200 + μF 3.3 μF VDD VD VGS 1 kΩ 100 nF RL IG= CONST VGS RG 47 kΩ + pulse width D.U.T. 2.7 kΩ 2200 μF pulse width D.U.T. 100 Ω VG 47 kΩ 1 kΩ AM01469v1 AM01468v1 Figure 19. Test circuit for inductive load switching and diode recovery times D G A D.U.T. S 25 Ω A L A VD 100 µH fast diode B B B 3.3 µF D G + Figure 20. Unclamped inductive load test circuit RG 1000 + µF 2200 + µF VDD 3.3 µF VDD ID D.U.T. S D.U.T. Vi _ pulse width AM01471v1 AM01470v1 Figure 22. Switching time waveform Figure 21. Unclamped inductive waveform ton V(BR)DSS td(on) toff td(off) tr tf VD 90% 90% IDM VDD 10% 0 ID VDD VGS AM01472v1 0 VDS 10% 90% 10% AM01473v1 DS9394 - Rev 5 page 8/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 4.1 H²PAK-2 package information Figure 23. H²PAK-2 package outline 8159712_9 DS9394 - Rev 5 page 9/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 H²PAK-2 package information Table 7. H²PAK-2 package mechanical data Dim. mm Min. Typ. Max. A 4.30 4.70 A1 0.03 0.20 C 1.17 1.37 D 8.95 9.35 e 4.98 5.18 E 0.50 0.90 F 0.78 0.85 F2 1.14 1.70 H 10.00 10.40 H1 7.40 J1 2.49 2.69 L 15.30 15.80 L1 1.27 1.40 L2 4.93 5.23 L3 6.85 7.25 L4 1.50 1.70 M 2.60 2.90 R 0.20 0.60 V 0° 8° - 7.80 Figure 24. H²PAK-2 recommended footprint 8159712_9 Note: DS9394 - Rev 5 Dimensions are in mm. page 10/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 H²PAK-6 package information 4.2 H²PAK-6 package information Figure 25. H²PAK-6 package outline 8159693_Rev_8 DS9394 - Rev 5 page 11/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 H²PAK-6 package information Table 8. H²PAK-6 package mechanical data Dim. DS9394 - Rev 5 mm Min. Typ. Max. A 4.30 4.70 A1 0.03 0.20 C 1.17 e 2.34 e1 4.88 5.28 e2 7.42 7.82 E 0.45 0.60 F 0.50 0.70 H 10.00 10.40 H1 7.40 7.80 L 14.75 15.25 L1 1.27 1.40 L2 4.35 4.95 L3 6.85 7.25 L4 1.50 1.75 M 1.90 2.50 R 0.20 0.60 V 0° 8° 1.37 2.54 2.74 page 12/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 H²PAK-6 package information Figure 26. H²PAK-6 recommended footprint footprint_Rev_8 Note: DS9394 - Rev 5 Dimensions are in mm. page 13/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 TO-220 type A package information 4.3 TO-220 type A package information Figure 27. TO-220 type A package outline 0015988_typeA_Rev_23 DS9394 - Rev 5 page 14/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 TO-220 type A package information Table 9. TO-220 type A package mechanical data Dim. mm Min. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 øP 3.75 3.85 Q 2.65 2.95 Slug flatness DS9394 - Rev 5 Typ. 0.03 0.10 page 15/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 Packing information 4.4 Packing information Figure 28. Tape outline 10 pitches cumulative tolerance on tape +/- 0.2 mm P0 Top cover tape T P2 D E F W K0 B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v2 Figure 29. Reel outline T REEL DIMENSIONS 40 mm min. Access hole At slot location B D C N A Tape slot In core for Full radius DS9394 - Rev 5 Tape start G measured At hub page 16/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 Packing information Table 10. Tape and reel mechanical data Tape Dim. DS9394 - Rev 5 Reel mm mm Dim. Min. Max. Min. Max. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base quantity 1000 P2 1.9 2.1 Bulk quantity 1000 R 50 T 0.25 0.35 W 23.7 24.3 330 13.2 26.4 30.4 page 17/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 Ordering information 5 Ordering information Table 11. Order codes Order codes Marking STH270N8F7-2 STH270N8F7-6 STP270N8F7 DS9394 - Rev 5 Package H²PAK-2 270N8F7 H²PAK-6 TO-220 Packing Tape and reel Tube page 18/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 Revision history Table 12. Document revision history Date Version 03-Dec-2012 1 Changes First release. – Modified: RDS(on) max values on Features table, IDSS, IGSS values on Table 4, RDS(on) value for H²PAK-2, the entire typical values on Table 5 and 6, VSD test conditions and max values, TRR, QRR, IRRM typical values on Table 7 09-Apr-2013 2 – Inserted: Section 3: Electrical characteristics (curves) – Document status promoted to preliminary data to production data – Added: H²PAK-6 package – Minor text changes – Modified: Crss typical value in Table 5 11-Oct-2013 3 – Updated: Section 5: Package information – Updated: Figure 18, 19, 20 and 21 – Minor text changes DS9394 - Rev 5 14-May-2015 4 12-Mar-2021 5 – Updated title, features and description in cover page. – Minor text changes Modified Table 3. On/off states. Minor text changes. page 19/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 Contents Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 5 4.1 H²PAK-2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.2 H²PAK-6 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.3 TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.4 Packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 DS9394 - Rev 5 page 20/21 STH270N8F7-2, STH270N8F7-6, STP270N8F7 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2021 STMicroelectronics – All rights reserved DS9394 - Rev 5 page 21/21