STP30NF20

STP30NF20 - STB30NF20 STW30NF20 N-channel 200V - 0.065Ω - 30A - TO-220/TO-247/D2PAK Low gate charge STripFET™ Power MOSFET Features Type VDSS RDS(on) ID PTOT STP30NF20 200V 0.075Ω 30A 125W STW30NF20 200V 0.075Ω 30A 125W STB30NF20 200V 0.075Ω 30A 125W 3 3 2 1 1 TO-247 ■ Gate charge minimized ■ 100% avalanche tested ■ Excellent figure of merit (RDS*Qg) ■ Very good manufactuing repeability ■ Very low intrinsic capacitances 3 1 2 TO-220 D²PAK Application Figure 1. ■ Internal schematic diagram Switching applications Description This Power MOSFET series realized with STMicroelectronics unique STripFET process has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced highefficiency isolated DC-DC converters. Table 1. Device summary Order codes Marking Package Packaging STP30NF20 30NF20 TO-220 Tube STW30NF20 30NF20 TO-247 Tube STB30NF20 30NF20 D²PAK Tape & reel October 2007 Rev 2 1/16 www.st.com 16 Contents STP30NF20 - STW30NF20 - STB30NF20 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/16 ................................................ 9 STP30NF20 - STW30NF20 - STB30NF20 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VDS Drain-source voltage (VGS = 0) 200 V VGS Gate-source voltage ±20 V ID Drain current (continuous) at TC = 25°C 30 A ID Drain current (continuous) at TC=100°C 19 A Drain current (pulsed) 120 A Total dissipation at TC = 25°C 125 W Derating factor 1 W/°C Peak diode recovery voltage slope 10 V/ns -55 to 150 °C 300 °C IDM (1) PTOT dv/dt(2) TJ Tstg Tl Operating junction temperature Storage temperature Maximum lead temperature for soldering purpose 1. Pulse width limited by safe operating area 2. ISD ≤ 30A, di/dt ≤ 200A/µs, VDD = 80%V(BR)DSS Table 3. Symbol Thermal data Parameter RthJC Thermal resistance junction-case max RthJA Thermal resistance junction-ambient max Table 4. Symbol TO-220/ D²PAK TO-247 1 62.5 Unit °C/W 50 °C/W Avalanche data Parameter Value Unit IAR Avalanche current, repetitive or not repetitive (pulse width limited by Tjmax) 30 A EAS Single pulse avalanche energy (starting Tj=25°C, ID=IAR, VDD=50V) 140 mJ 3/16 Electrical characteristics 2 STP30NF20 - STW30NF20 - STB30NF20 Electrical characteristics (TCASE=25°C unless otherwise specified) Table 5. Symbol V(BR)DSS On/off states Parameter Drain-source breakdown voltage Test conditions ID = 1mA, VGS= 0 Zero gate voltage drain current (VGS = 0) IGSS Gate body leakage current (VDS = 0) VGS = ±20V VGS(th) Gate threshold voltage VDS= VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS= 10V, ID= 15A Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Max. 200 2 Unit V VDS = Max rating,Tc=125°C 3 1 10 µA µA ±100 nA 4 V 0.065 0.075 Ω Dynamic Parameter Test conditions Forward transconductance VDS =15V, ID = 15A Input capacitance Output capacitance Reverse transfer capacitance VDS =25V, f=1 MHz, VGS=0 Total gate charge Gate-source charge Gate-drain charge VDD=160V, ID = 30A VGS =10V (see Figure 17) 1. Pulsed: pulse duration=300µs, duty cycle 1.5% 4/16 Typ. VDS = Max rating, IDSS Table 6. Min. Min. Typ. Max. Unit 20 S 1597 320 43 pF pF pF 38 8 18 nC nC nC STP30NF20 - STW30NF20 - STB30NF20 Table 7. Switching times Symbol Parameter td(on) tr td(off) tf Table 8. Symbol Turn-on delay time Rise time Turn-off delay time Fall time Electrical characteristics Test conditions Min. VDD=100V, ID=15A, RG=4.7Ω, VGS=10V (see Figure 16) VDD=100V, ID=15A, RG=4.7Ω, VGS=10V (see Figure 16) Typ. Max. Unit 35 15.7 ns ns 38 8.8 ns ns Source drain diode Parameter Test conditions Min. Typ. Max. Unit 30 120 A A 1.5 V ISDM(1) Source-drain current Source-drain current (pulsed) VSD(2) Forward on voltage ISD=30A, VGS=0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD=30A, di/dt = 100A/µs, VDD=100 V, Tj=25°C 155 0.96 12.4 ns µC A Reverse recovery time Reverse recovery charge Reverse recovery current ISD=30A, di/dt = 100A/µs, VDD=100 V, Tj=150°C 194 1.42 14.6 ns µC A ISD trr Qrr IRRM trr Qrr IRRM 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300µs, duty cycle 1.5% 5/16 Electrical characteristics STP30NF20 - STW30NF20 - STB30NF20 2.1 Electrical characteristics (curves) Figure 2. Safe operating area for TO-247 Figure 3. Thermal impedance for TO-247 Figure 4. Safe operating area for TO-220/ D²PAK Figure 5. Thermal impedance for TO-220/ D²PAK Figure 6. Output characteristics Figure 7. Transfer characteristics 6/16 STP30NF20 - STW30NF20 - STB30NF20 Figure 8. Normalized BVDSS vs temperature Electrical characteristics Figure 9. Static drain-source on resistance Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations Figure 12. Normalized gate threshold voltage vs temperature Figure 13. Normalized on resistance vs temperature 7/16 Electrical characteristics Figure 14. Source-drain diode forward characteristics 8/16 STP30NF20 - STW30NF20 - STB30NF20 Figure 15. Maximum avalanche energy vs temperature STP30NF20 - STW30NF20 - STB30NF20 3 Test circuit Test circuit Figure 16. Switching times test circuit for resistive load Figure 17. Gate charge test circuit Figure 18. Test circuit for inductive load Figure 19. Unclamped inductive load test switching and diode recovery times circuit Figure 20. Unclamped inductive waveform Figure 21. Switching time waveform 9/16 Package mechanical data 4 STP30NF20 - STW30NF20 - STB30NF20 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/16 STP30NF20 - STW30NF20 - STB30NF20 Package mechanical data TO-247 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. TYP. MAX. A 4.85 5.15 0.19 0.20 A1 2.20 2.60 0.086 0.102 b 1.0 1.40 0.039 0.055 b1 2.0 2.40 0.079 0.094 0.134 b2 3.0 3.40 0.118 c 0.40 0.80 0.015 0.03 D 19.85 20.15 0.781 0.793 E 15.45 15.75 0.608 e 5.45 L 14.20 14.80 0.560 L1 3.70 4.30 0.14 L2 0.620 0.214 18.50 0.582 0.17 0.728 øP 3.55 3.65 0.140 0.143 øR 4.50 5.50 0.177 0.216 S 5.50 0.216 11/16 Package mechanical data STP30NF20 - STW30NF20 - STB30NF20 TO-220 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 12/16 TYP 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 STP30NF20 - STW30NF20 - STB30NF20 Package mechanical data D²PAK mechanical data mm inch Dim Min A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 Typ 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 Max Min 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 10.4 0.393 8 10 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 0.409 0.334 5.28 15.85 1.4 1.75 3.2 0.4 0° Max 0.315 8.5 4.88 15 1.27 1.4 2.4 Typ 0.192 0.590 0.50 0.055 0.094 0.208 0.625 0.55 0.68 0.126 0.015 4° 13/16 Packaging mechanical data 5 STP30NF20 - STW30NF20 - STB30NF20 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 MAX. R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 * on sales type 14/16 inch 0.933 0.956 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STP30NF20 - STW30NF20 - STB30NF20 6 Revision history Revision history Table 9. Document revision history Date Revision Changes 25-Jan-2007 1 First Release 18-Oct-2007 2 Added D²PAK 15/16 STP30NF20 - STW30NF20 - STB30NF20 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16