STP4NB80FP

® STP4NB80 STP4NB80FP N - CHANNEL 800V - 3Ω - 4A - TO-220/TO-220FP PowerMESH™ MOSFET T YPE STP4NB80 STP4NB80FP s s s s s V DSS 800 V 800 V R DS(on) 3.3 Ω 3.3 Ω ID 4A 4A TYPICAL RDS(on) = 3 Ω EXTREMELY HIGH dv/dt CAPABILITY 100% AVALANCHE TESTED VERY LOW INTRINSIC CAPACITANCES GATE CHARGE MINIMIZED 3 1 2 3 1 2 DESCRIPTION Using the latest high voltage MESH OVERLAY™ process, STMicroelectronics has designed an advanced family of power MOSFETs with outstanding performances. The new patent pending strip layout coupled with the Company’s proprietary edge termination structure, gives the lowest RDS(on) per area, exceptional avalanche and dv/dt capabilities and unrivalled gate charge and switching characteristics. APPLICATIONS HIGH CURRENT, HIGH SPEED SWITCHING s SWITCH MODE POWER SUPPLIES (SMPS) s DC-AC CONVERTERS FOR WELDING EQUIPMENT AND UNINTERRUPTIBLE POWER SUPPLIES AND MOTOR DRIVE s TO-220 TO-220FP INTERNAL SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol V DS V DGR V GS ID ID IDM ( • ) P tot dv/dt(1 ) V ISO T stg Tj Parameter Drain-source Voltage (V GS = 0 ) Drain- gate Voltage (R GS = 2 0 k Ω ) Gate-source Voltage Drain Current (continuous) at T c = 2 5 o C Drain Current (continuous) at T c = 1 00 C Drain Current (pulsed) Total Dissipation at T c = 2 5 o C Derating Factor Peak Diode Recovery voltage slope Insulation Withstand Voltage (DC) Storage Temperature Max. Operating Junction Temperature o Value STP4NB80 STP4NB80FP 800 800 ± 30 4 2.4 16 100 0.8 4.5  -65 to 150 150 (1) ISD ≤4 A, di/dt ≤ 200 A/µs, VDD ≤ V(BR)DSS, Tj ≤ TJMAX Unit V V V A A A W W/ C V/ns o o o 4(*) 2.4(*) 16 35 0.28 4.5 2500 V C C (•) Pulse width limited by safe operating area (*) Limited only by maximum temperature allowed September 2001 1/9 STP4NB80/FP THERMAL DATA TO-220 R thj-case R thj-amb R thc-sink Tl Thermal Resistance Junction-case Max 1.25 62.5 0.5 300 TO220-FP 3.6 o o o C/W C/W C/W o C Thermal Resistance Junction-ambient Max Thermal Resistance Case-sink Typ Maximum Lead Temperature For Soldering Purpose AVALANCHE CHARACTERISTICS Symbol I AR E AS Parameter Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by T j m ax) Single Pulse Avalanche Energy (starting T j = 25 o C, I D = I AR , V DD = 5 0 V) Max Value 4 230 Unit A mJ ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified) OFF Symbol V (BR)DSS I DSS I GSS Parameter Drain-source Breakdown Voltage Test Conditions I D = 250 µ A VGS = 0 Min. 800 1 50 ± 1 00 Typ. Max. Unit V µA µA nA Zero Gate Voltage V DS = M ax Rating Drain Current (VGS = 0 ) V DS = M ax Rating Gate-body Leakage Current (V DS = 0) V GS = ± 3 0 V T c = 1 25 o C ON (∗) Symbol V GS(th) R DS(on) ID(on) Parameter Gate Threshold Voltage V DS = VGS Static Drain-source On Resistance V GS = 10V Test Conditions ID = 2 50 µ A ID = 2 A 4 Min. 3 Typ. 4 3 Max. 5 3.3 Unit V Ω A On State Drain Current V DS > I D(on) x R DS(on)max V GS = 1 0 V DYNAMIC Symbol g fs ( ∗ ) C iss C oss C rss Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Test Conditions V DS > I D(on) x R DS(on)max V DS = 25 V f = 1 MHz ID = 2 A V GS = 0 Min. 1.5 Typ. 2.9 700 95 9 920 126 12 Max. Unit S pF pF pF 2/9 STP4NB80/FP ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON Symbol t d(on) tr Qg Q gs Q gd Parameter Turn-on delay Time Rise Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Test Conditions V DD = 4 00 V R G = 4 .7 Ω V DD = 6 40 V ID = 2 A V GS = 1 0 V I D = 4 A V GS = 1 0 V Min. Typ. 14 8 21 7 9 Max. 20 12 29 Unit ns ns nC nC nC SWITCHING OFF Symbol t r(Voff) tf tc Parameter Off-voltage Rise Time Fall Time Cross-over Time Test Conditions V DD = 6 40V ID = 4 A R G = 4 .7 Ω V GS = 10 V Min. Typ. 12 9 16 Max. 17 13 22 Unit ns ns ns SOURCE DRAIN DIODE Symbol I SD I SDM (• ) V SD ( ∗ ) t rr Q rr I RRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current I SD = 4 A V GS = 0 600 3.3 11 I SD = 4 A d i/dt = 100 A/ µ s o V DD = 1 00 V T j = 1 50 C Test Conditions Min. Typ. Max. 4 16 1.6 Unit A A V ns µC A (∗) Pulsed: Pulse duration = 300 µs, duty cycle 1.5 % (•) Pulse width limited by safe operating area Safe Operating Area for TO-220 Safe Operating Area for TO-220FP 3/9 STP4NB80/FP Thermal Impedance for TO-220 Thermal Impedance forTO-220FP Output Characteristics Transfer Characteristics Transconductance Static Drain-source On Resistance 4/9 STP4NB80/FP Gate Charge vs Gate-source Voltage Capacitance Variations Normalized Gate Threshold Voltage vs Temperature Normalized On Resistance vs Temperature Source-drain Diode Forward Characteristics 5/9 STP4NB80/FP Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform Fig. 3: Switching Times Test Circuits For Resistive Load Fig. 4: Gate Charge test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 6/9 STP4NB80/FP TO-220 MECHANICAL DATA DIM. A C D E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 M DIA. 3.75 13.00 2.65 15.25 6.20 3.50 2.60 3.85 0.147 mm MIN. 4.40 1.23 2.40 0.49 0.61 1.14 1.14 4.95 2.40 10.00 16.40 14.00 2.95 15.75 6.60 3.93 0.511 0.104 0.600 0.244 0.137 0.102 0.151 TYP. MAX. 4.60 1.32 2.72 0.70 0.88 1.70 1.70 5.15 2.70 10.40 MIN. 0.173 0.048 0.094 0.019 0.024 0.044 0.044 0.194 0.094 0.394 0.645 0.551 0.116 0.620 0.260 0.154 inch TYP. MAX. 0.181 0.052 0.107 0.027 0.034 0.067 0.067 0.202 0.106 0.409 P011CI 7/9 STP4NB80/FP TO-220FP MECHANICAL DATA DIM. MIN. A B D E F F1 F2 G G1 H L2 L3 L4 L6 L7 Ø 28.6 9.8 15.9 9 3 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 30.6 10.6 16.4 9.3 3.2 1.126 0.385 0.626 0.354 0.118 mm TYP. MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 A B L3 L6 L7 F1 D ¯ H F G1 E F2 123 L2 L4 8/9 G STP4NB80/FP Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics © 2001 STMicroelectronics – Printed in Italy – All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 9/9