STPR1020CT

STPR1020CB/CG/CT/CF/CFP/CR ® ULTRA-FAST RECOVERY RECTIFIER DIODES A1 MAIN PRODUCTS CHARACTERISTICS K IF(AV) 2x5A VRRM 200 V A2 ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O Tj (max) 150°C VF (max) 0.99 V trr (max) A1 30 ns ■ ■ ■ ■ A2 SUITED FOR SMPS LOW LOSSES LOW FORWARD AND REVERSE RECOVERY TIME HIGH SURGE CURRENT CAPABILITY INSULATED PACKAGES: ISOWATT220AB / TO-220FPAB Insulation Voltage = 2000V DC Capacitance = 12 pF DESCRIPTION Dual center tap rectifier suited for Switched Mode Power Supplies and high frequency DC to DC converters. Packaged in DPAK, D2PAK, I2PAK, TO-220AB, TO-220FPAB or ISOWATT220AB, this device is intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications. A2 K A1 TO-220AB STPR1020CT FEATURES ■ K TO-220FPAB STPR1020CFP K K A2 A1 K ISOWATT220AB STPR1020CF A2 A1 DPAK STPR1020CB K A2 A2 K A1 D2PAK STPR1020CG A1 I2PAK STPR1020CR ABSOLUTE MAXIMUM (limiting values, per diode) Symbol VRRM IF(RMS) IF(AV) Parameter Value Unit 200 V D PAK / TO-220AB / ISOWATT220AB / TO-220FPAB / I2PAK 10 A DPAK 7 A A Repetitive peak reverse voltage RMS forward current 2 2 Average forward D PAK / DPAK current TO-220AB / I2PAK δ = 0.5 ISOWATT220AB TO-220FPAB IFSM Surge non repetitive forward current Tstg Storage temperature range August 2002- Ed: 2E Tc=125°C Per diode 5 Tc=115°C Per device 10 Tc=110°C Per device 10 tp=10ms sinusoidal 50 - 65 to + 150 A °C 1/10 STPR1020CB/CG/CT/CF/CFP/CR THERMAL RESISTANCES Symbol Rth (j-c) Parameter Junction to case 2 TO-220AB / D PAK / DPAK I2PAK ISOWATT220AB TO-220FPAB Value Unit Per diode 4.0 °C/W Total 2.4 Per diode 6.0 Total 4.0 Per diode 6.5 Total 5 ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O Rth (c) Coupling TO-220AB / D2PAK / DPAK / I2PAK 0.7 ISOWATT220AB 2.0 TO-220FPAB 3.5 When diodes 1 and 2 are used simultaneously : ∆ Tj(diode 1) = P(diode 1) x Rth(j-c) (Per diode) + P(diode 2) x Rth(c) STATIC ELECTRICAL CHARACTERISTICS (per diode) Symbol IR * VF ** Parameters Reverse leakage current Test conditions Tj = 25°C VR = VRRM Forward voltage drop Tj = 125°C IF = 5 A Tj = 125°C IF = 10 A Tj = 25°C IF = 10 A Min. Typ. Max. 50 Unit µA 0.6 mA 0.8 0.99 V 0.95 1.20 Tj = 100°C 1.25 Pulse test : * tp = 5 ms, δ < 2 % ** tp = 380 µs, δ < 2 % To evaluate the conduction losses use the following equation : P = 0.78 x IF(AV) + 0.042 x IF2(RMS) RECOVERY CHARACTERISTICS Symbol trr Tj = 25°C Test conditions IF = 0.5A IR = 1A Min. Typ. Irr = 0.25A Max. 30 Unit ns tfr Tj = 25°C IF = 1A VFR = 1.1 x VF max dIF/dt = 50 A/µs 20 ns VFP Tj = 25°C IF = 1A dIF/dt = 50 A/µs 3 V 2/10 STPR1020CB/CG/CT/CF/CFP/CR Fig. 1: Average forward power dissipation versus average forward current (per diode). Fig. 2: Peak current versus form factor (per diode). IM(A) PF(av)(W) 7 δ = 0.1 δ = 0.2 δ = 0.5 δ = 0.05 6 5 δ=1 4 3 2 T 50 45 40 35 30 25 20 15 10 5 0 0.0 T δ=tp/T P=5W tp P=7.5W P=10W ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O 1 IF(av) (A) tp δ=tp/T 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Fig. 3-1: Average forward current versus ambient temperature (δ = 0.5, TO-220AB, DPAK, D2PAK). P=2.5W δ 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Fig. 3-2: Average forward current versus ambient temperature (δ = 0.5, ISOWATT220AB, TO-220FPAB). IF(av)(A) IF(av)(A) 6 6 Rth(j-a)=Rth(j-c) Rth(j-a)=Rth(j-c) 5 5 4 4 ISOWATT220AB TO-220FP Rth(j-a)=15°C/W 3 2 2 T 1 0 δ=tp/T 0 50 75 T 1 Tamb(°C) tp 25 Rth(j-a)=15°C/W 3 100 125 150 Fig. 4-1: Non repetitive surge peak forward current versus overload duration (TO-220AB, DPAK, D2PAK). 0 δ=tp/T 0 Tamb(°C) tp 25 50 75 100 125 150 Fig. 4-2: Non repetitive surge peak forward current versus overload duration (ISOWATT220AB). IM(A) IM(A) 70 60 60 50 50 40 40 Tc=25°C 30 Tc=25°C 30 20 20 IM 10 Tc=125°C t(s) t δ=0.5 0 1E-3 1E-2 IM 10 Tc=100°C t t(s) δ=0.5 1E-1 1E+0 0 1E-3 1E-2 1E-1 1E+0 3/10 STPR1020CB/CG/CT/CF/CFP/CR Fig. 4-3: Non repetitive surge peak forward current versus overload duration (TO-220FPAB). Fig. 5-1: Relative variation of thermal impedance junction to case versus pulse duration (D2PAK, DPAK, TO-220AB). IM(A) K=[Zth(j-c)/Rth(j-c)] 50 1.0 δ = 0.5 40 δ = 0.2 30 Tc=25°C δ = 0.1 20 ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O T 10 t(s) t 0 1E-3 Single pulse Tc=100°C IM δ=0.5 1E-2 t(s) 1E-1 1E+0 Fig. 5-2: Relative variation of thermal impedance junction to case versus pulse duration (ISOWATT220AB, TO-220FPAB). 0.1 1E-3 1E-2 δ=tp/T tp 1E-1 1E+0 Fig. 6: Forward voltage drop versus forward current (maximum values, per diode). IFM(A) K=[Zth(j-c)/Rth(j-c)] 50.0 1.0 δ = 0.5 10.0 Tj=125°C δ = 0.2 Tj=25°C δ = 0.1 1.0 T Single pulse t(s) 0.1 1E-2 1E-1 δ=tp/T VFM(V) tp 1E+0 1E+1 Fig. 7: Junction capacitance versus reverse voltage applied (typical values, per diode). 0.1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Fig. 8: Reverse recovery charges versus dIF/dt (per diode). Qrr(nC) C(pF) 200 50 F=1MHz Tj=25°C 40 IF=IF(av) 90% confidence Tj=125°C 100 30 50 20 20 dIF/dt(A/µs) VR(V) 10 1 4/10 10 100 200 10 10 20 50 100 200 500 STPR1020CB/CG/CT/CF/CFP/CR Fig. 9: Peak reverse recovery current versus dIF/dt (per diode). Fig. 10: Dynamic parameters versus junction temperature (per diode). Qrr;IRM [Tj] / Qrr;IRM [Tj=125°C] IRM(A) 1.25 20.0 IF=IF(av) 90% confidence Tj=125°C 10.0 1.00 IRM 0.75 1.0 ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O Qrr 0.50 Tj(°C) dIF/dt(A/µs) 0.1 10 20 50 100 200 500 0.25 0 25 50 75 100 125 150 Fig. 11: Thermal resistance junction to ambient versus copper surface under tab (Epoxy printed circuit board FR4, copper thickness: 35µm). Rth(j-a) (°C/W) 100 90 80 70 60 50 40 30 20 10 0 DPAK D²PAK S(Cu) (cm²) 0 5 10 15 20 25 30 35 40 5/10 STPR1020CB/CG/CT/CF/CFP/CR PACKAGE MECHANICAL DATA DPAK REF. A A1 A2 B B2 C C2 D E G H L2 L4 V2 DIMENSIONS Millimeters Inches Min. Max Min. Max. 2.20 2.40 0.086 0.094 0.90 1.10 0.035 0.043 0.03 0.23 0.001 0.009 0.64 0.90 0.025 0.035 5.20 5.40 0.204 0.212 0.45 0.60 0.017 0.023 0.48 0.60 0.018 0.023 6.00 6.20 0.236 0.244 6.40 6.60 0.251 0.259 4.40 4.60 0.173 0.181 9.35 10.10 0.368 0.397 0.80 typ. 0.031 typ. 0.60 1.00 0.023 0.039 0° 8° 0° 8° ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O FOOT PRINT (in milliteters) DPAK 6.7 6.7 3 3 1.6 1.6 2.3 6/10 2.3 STPR1020CB/CG/CT/CF/CFP/CR PACKAGE MECHANICAL DATA D2PAK REF. A E C2 L2 D A A1 A2 B B2 C C2 D E G L L2 L3 M R V2 DIMENSIONS Millimeters Inches Min. Max. Min. Max. 4.40 4.60 0.173 0.181 2.49 2.69 0.098 0.106 0.03 0.23 0.001 0.009 0.70 0.93 0.027 0.037 1.14 1.70 0.045 0.067 0.45 0.60 0.017 0.024 1.23 1.36 0.048 0.054 8.95 9.35 0.352 0.368 10.00 10.40 0.393 0.409 4.88 5.28 0.192 0.208 15.00 15.85 0.590 0.624 1.27 1.40 0.050 0.055 1.40 1.75 0.055 0.069 2.40 3.20 0.094 0.126 0.40 typ. 0.016 typ. 0° 8° 0° 8° ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O L L3 A1 B2 R C B G A2 M * V2 * FLAT ZONE NO LESS THAN 2mm FOOT PRINT (in milliteters) D2PAK 16.90 10.30 5.08 1.30 3.70 8.90 7/10 STPR1020CB/CG/CT/CF/CFP/CR PACKAGE MECHANICAL DATA I2PAK DIMENSIONS REF. A E c2 L2 Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 A1 2.49 2.69 0.098 0.106 b 0.70 0.93 0.028 0.037 b1 1.14 1.17 0.044 0.046 b2 1.14 1.17 0.044 0.046 c 0.45 0.60 0.018 0.024 c2 1.23 1.36 0.048 0.054 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 E 10.0 10.4 0.394 0.409 L 13.1 13.6 0.516 0.535 L1 3.48 3.78 0.137 0.149 L2 1.27 1.40 0.050 0.055 ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O D L1 A1 b2 L b1 b c e PACKAGE MECHANICAL DATA TO-220AB (JEDEC compatible) H2 REF. A C L5 L7 Dia OPTIONAL L6 L2 L9 D F2 F1(x2) L4 M F E G1 G 8/10 A C D E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 M Dia. DIMENSIONS Millimeters Inches Min. Max. Min. Max. 4.30 4.60 0.169 0.181 1.22 1.32 0.048 0.052 2.40 2.72 0.094 0.107 0.33 0.70 0.013 0.028 0.61 0.93 0.024 0.037 1.14 1.70 0.045 0.067 1.14 1.70 0.045 0.067 4.95 5.15 0.195 0.202 2.40 2.70 0.094 0.106 10.00 10.40 0.394 0.409 16.00 Typ. 0.630 Typ. 13.00 14.00 0.512 0.551 2.65 2.95 0.104 0.116 14.80 15.75 0.583 0.620 6.20 6.60 0.244 0.260 3.40 3.94 0.134 0.155 2.60 Typ. 0.102 Typ. 3.75 3.89 0.148 0.153 STPR1020CB/CG/CT/CF/CFP/CR PACKAGE MECHANICAL DATA TO-220FPAB DIMENSIONS REF. Millimeters Inches A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia. Min. Max. 4.4 4.6 2.5 2.7 2.5 2.75 0.45 0.70 0.75 1 1.15 1.70 1.15 1.70 4.95 5.20 2.4 2.7 10 10.4 16 Typ. 28.6 30.6 9.8 10.6 2.9 3.6 15.9 16.4 9.00 9.30 3.00 3.20 Min. Max. 0.173 0.181 0.098 0.106 0.098 0.108 0.018 0.027 0.030 0.039 0.045 0.067 0.045 0.067 0.195 0.205 0.094 0.106 0.393 0.409 0.63 Typ. 1.126 1.205 0.386 0.417 0.114 0.142 0.626 0.646 0.354 0.366 0.118 0.126 A B H Dia L6 ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O L2 L7 L3 L5 D F1 L4 F2 F G1 G E PACKAGE MECHANICAL DATA ISOWATT220AB (JEDEC compatible) DIMENSIONS REF. Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 B 2.50 2.70 0.098 0.106 D 2.50 2.75 0.098 0.108 E 0.40 0.70 0.016 0.028 F 0.75 1.00 0.030 0.039 F1 1.15 1.70 0.045 0.067 F2 1.15 1.70 0.045 0.067 G 4.95 5.20 0.195 0.205 G1 2.40 2.70 0.094 0.106 H 10.00 10.40 0.394 0.409 L2 16.00 typ. 0.630 typ. L3 28.60 30.60 1.125 1.205 L4 9.80 10.60 0.386 0.417 L6 15.90 16.40 0.626 0.646 L7 9.00 9.30 0.354 0.366 Diam 3.00 3.20 0.118 0.126 9/10 STPR1020CB/CG/CT/CF/CFP/CR Ordering type ■ Marking Package Weight Base qty STPR1020CB STPR1020CB DPAK 0.3g STPR1020CB-TR STPR1020CB DPAK 0.3g STPR1020CT STPR1020CT TO-220AB 2.23g STPR1020CF STPR1020CF ISOWATT220AB 2.2g STPR1020CG STPR1020CG D2PAK 1.48g STPR1020CFP STPR1020CFP TO-220FP 2.0g 1.49 g STPR1020CR STPR1020CR I2PAK Cooling method : by conduction (C) Recommended torque value (ISOWATT220AB, TO-220FPAB): 0.55 N.m. Maximum torque value (ISOWATT220AB, TO-220FPAB): 0.70 N.m. Recommended torque value (TO-220AB): 0.8 N.m Maximum torque value (TO-220AB): 1.0 N.m. Epoxy meets UL94,V0 75 2500 50 50 50 50 50 Delivery mode Tube Tape & reel Tube Tube Tube Tube Tube ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O ■ ■ ■ ■ ■ Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 10/10