STPS10H100SFY

STPS10H100SFY Datasheet Automotive 100 V, 10 A low Ir power Schottky rectifier Features • • • • • • AEC-Q101 qualified Low leakage current Negligible switching losses Avalanche capability specified 175 °C maximum junction temperature VRRM guaranteed from -40 °C to 175 °C • • Wettable flanks for automatic visual inspection PPAP capable • ECOPACK®2 compliant component Applications • • • • DC / DC converter Reverse polarity protection Freewheeling diode Switching diode Description Product status link STPS10H100SFY Product summary Symbol Value IF(AV) 10 A VRRM 100 V Tj (max.) 175 °C VF (typ.) 0.615 V The STPS10H100SFY power Schottky rectifier has been designed for automotive applications. Packaged in PSMC (TO-277A), the STPS10H100SFY provides a very low IR in a compact package which can withstand high operating junction temperature. DS12906 - Rev 1 - February 2019 For further information contact your local STMicroelectronics sales office. www.st.com STPS10H100SFY Characteristics 1 Characteristics Table 1. Absolute ratings (limiting values at 25 °C, unless otherwise specified with 2 anode terminals short-circuited) Symbol Parameter Value Unit 100 V VRRM Repetitive peak reverse voltage (Tj = -40 °C to +175 °C) IF(AV) Average forward current, δ = 0.5 Tc = 140 °C 10 A IFSM Surge non repetitive forward current tp = 10 ms sinusoidal 230 A PARM Repetitive peak avalanche power tp = 10 µs, Tj = 125 °C 518 W -65 to +175 °C -40 to +175 °C Tstg Tj Storage temperature range Operating junction temperature range(1) 1. (dPtot/dTj) < (1/Rth(j-a)) condition to avoid thermal runaway for a diode on its own heatsink. Table 2. Thermal resistance parameters Symbol Rth(j-c) Parameter Junction to case Typ. Unit 2.1 °C/W For more information, please refer to the following application note: • AN5088: Rectifiers thermal management, handling and mounting recommendations Table 3. Static electrical characteristics (anode terminals short-circuited) Symbol IR(1) Parameter Reverse leakage current Test conditions Tj = 25 °C Tj = 125 °C Tj = 25 °C VF(2) Forward voltage drop Tj = 125 °C Tj = 25 °C Tj = 125 °C VR = VRRM IF = 5 A IF = 10 A Min. Typ. - 1.5 - Unit 8 µA 5 mA 0.745 0.545 - Max. 0.610 0.845 0.615 V 0.690 1. Pulse test: tp = 5 ms, δ < 2% 2. Pulse test: tp = 380 µs, δ < 2% To evaluate the conduction losses, use the following equation: P = 0.530 x IF(AV) + 0.016 x IF2(RMS) For more information, please refer to the following application notes related to the power losses: • AN604: Calculation of conduction losses in a power rectifier • AN4021: Calculation of reverse losses in a power diode DS12906 - Rev 1 page 2/11 STPS10H100SFY Characteristics (curves) 1.1 Characteristics (curves) Figure 2. Relative variation of thermal impedance junction to case versus pulse duration Figure 1. Average forward current versus case temperature (δ = 0.5) IF(AV)(A) 1.0 40 Zth(j-c) /Rth(j-c) 0.9 35 0.8 30 0.7 25 0.6 0.5 20 0.4 15 0.3 T 10 0.2 Single pulse 5 δ=tp/T 0.1 Tc(°C) tp 0 0 25 50 75 100 125 150 175 Figure 3. Reverse leakage current versus reverse voltage applied (typical values) 1.E+04 0.0 1.E-04 t P(s) 1.E-03 1.E-02 1.E-01 1.E+00 Figure 4. Junction capacitance versus reverse voltage applied (typical values) IR(µA) C(pF) 1000 F = 1 MHz VOSC = 30 mVRMS Tj = 25 °C Tj = 150 °C 1.E+03 Tj = 125 °C Tj = 100 °C 1.E+02 Tj = 75 °C 1.E+01 100 Tj = 50 °C 1.E+00 Tj = 25 °C 1.E-01 VR(V) VR(V) 1.E-02 10 0 DS12906 - Rev 1 10 20 30 40 50 60 70 80 90 100 1 10 100 page 3/11 STPS10H100SFY Characteristics (curves) Figure 6. Normalized avalanche power derating versus pulse duration (Tj = 125 °C) Figure 5. Forward voltage drop versus forward current (typical values) PARM (t p ) PARM (10 µs) IF(A) 100.0 1 10.0 0.1 Tj = 25 °C 1.0 0.01 Tj = 75 °C Tj = 125 °C Tj = -40 °C Tj = 150 °C VF(V) 0.1 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 0.001 t p(µs) 1 10 100 1000 Figure 7. Thermal resistance junction to ambient versus copper surface under tab (typical values, epoxy printed board FR4, eCu = 35 µm) (PSMC (TO-277A)) 120 Rth(j-a) (°C/W) PSMC (TO-277A) 100 80 60 40 20 SCu (cm²) 0 0 DS12906 - Rev 1 1 2 3 4 5 6 7 8 9 10 page 4/11 STPS10H100SFY Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 2.1 PSMC (TO-277A) package information • • Epoxy meets UL94,V0 Cooling method : by conduction (C) Figure 8. PSMC (TO-277A) package outline DS12906 - Rev 1 page 5/11 STPS10H100SFY PSMC (TO-277A) package information Table 4. PSMC (TO-277A) package mechanical data Dimensions Ref. Millimeters Inches (for reference only) Min. Typ. Max. Min. Typ. Max. A 1.00 1.10 1.20 0.039 0.043 0.047 b 1.05 1.20 1.35 0.041 0.047 0.053 b2 1.90 2.05 2.20 0.075 0.081 0.087 b4 0.75 0.029 C 0.15 0.23 0.40 0.006 0.009 0.016 D 4.45 4.60 4.75 0.175 0.181 0.187 D1 4.25 4.40 4.45 0.167 0.173 0.175 D2 3.40 3.60 3.70 0.134 0.142 0.146 E 6.35 6.50 6.65 0.250 0.256 0.262 E1 6.05 6.10 6.15 0.238 0.240 0.242 E2 4.50 4.60 4.70 0.177 0.181 0.185 E3 3.94 1.55 e 2.13 0.084 e1 3.33 0.131 G 1.20 0.047 G1 0.70 0.027 L 0.90 1.05 1.24 0.035 L4 0.02 0.0008 L5 0.02 0.0008 0.041 0.049 Figure 9. PSMC (TO-277A) package footprint in mm (in inches) DS12906 - Rev 1 page 6/11 STPS10H100SFY PSMC (TO-277A) package information Figure 10. PSMC (TO-277A) marking Figure 12. Tape and reel orientation Figure 11. Package orientation in reel Figure 13. 13'' reel dimension values DS12906 - Rev 1 Figure 14. Inner box dimension values page 7/11 STPS10H100SFY PSMC (TO-277A) package information Figure 15. Tape outline Table 5. Tape dimension values Dimensions Ref. DS12906 - Rev 1 Millimeters Min. Typ. Max. D0 1.5 1.55 1.6 D1 1.5 F 5.45 5.5 5.55 K0 1.3 1.4 1.5 P0 3.9 4.0 4.1 P1 7.9 8.0 8.1 P2 1.95 2.0 2.5 W 11.7 12 12.3 page 8/11 STPS10H100SFY Ordering information 3 Ordering information Table 6. Ordering information DS12906 - Rev 1 Order code Marking Package Weight Base qty. Delivery mode STPS10H100SFY 10H100Y PSMC (TO-277A) 90 mg 6000 Tape and Reel page 9/11 STPS10H100SFY Revision history Table 7. Document revision history DS12906 - Rev 1 Date Version 08-Feb-2019 1 Changes Initial release. page 10/11 STPS10H100SFY IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2019 STMicroelectronics – All rights reserved DS12906 - Rev 1 page 11/11