STPS10L45CF

® STPS10L45CT/CG/CF/CFP LOW DROP POWER SCHOTTKY RECTIFIER MAIN PRODUCTS CHARACTERISTICS IF(AV) VRRM Tj (max) VF (max) 2x5 A 45 V 150°C 0.46 V K A1 K A2 FEATURES AND BENEFITS LOW FORWARD VOLTAGE DROP MEANING VERY SMALL CONDUCTION LOSSES LOW SWITCHING LOSSES ALLOWING HIGH FREQUENCY OPERATION INSULATED PACKAGE: ISOWATT220AB, TO-220FPAB Insulating voltage = 2000V DC Capacitance = 12pF AVALANCHE CAPABILITY SPECIFIED s s s s A2 A2 K A1 A1 TO-220FPAB STPS10L45CFP D2PAK STPS10L45CG DESCRIPTION Dual center tap Schottky rectifiers suited for Switched Mode Power Supplies and high frequency DC to DC converters. Packaged in TO-220AB, ISOWATT220AB, TO-220FPAB and D2PAK, these devices are intended for use in low voltage, high frequency inverters, free-wheeling and polarity protection applications. ABSOLUTE RATINGS (limiting values, per diode) Symbol VRRM IF(RMS) IF(AV) Parameter Repetitive peak reverse voltage RMS forward current Average forward current TO-220AB D2PAK ISOWATT220AB TO-220FPAB IFSM IRRM IRSM PARM Tstg Tj dV/dt Surge non repetitive forward current Repetitive peak reverse current Non repetitive peak reverse current Repetitive peak avalanche power Storage temperature range Maximum operating junction temperature * A2 A1 K A1 A2 K TO-220AB STPS10L45CT ISOWATT220AB STPS10L45CF Value 45 20 Tc =135°C δ = 0.5 Tc =115°C δ = 0.5 Per diode Per device Per diode Per device 5 10 5 10 150 1 2 2700 - 65 to + 150 150 Unit V A A A A A A W °C °C V/µs tp = 10 ms Sinusoidal tp = 2 µs square F=1kHz tp = 100 µs tp = 1µs square Tj = 25°C 10000 Critical rate of rise of reverse voltage dPtot 1 thermal runaway condition for a diode on its own heatsink *: < dTj Rth( j − a ) July 2003 - Ed: 3B 1/7 STPS10L45CT/CG/CF/CFP THERMAL RESISTANCES Symbol Rth (j-c) Rth (c) Rth (j-c) Rth (c) Junction to case ISOWATT220AB TO-220FPAB Junction to case Parameter TO-220AB D2PAK Per diode Total Coupling Per diode Total Coupling Value 3 1.7 0.35 5 3.8 2.5 °C/W Unit °C/W When the diodes 1 and 2 are used simultaneously : ∆ Tj(diode 1) = P(diode1) x Rth(j-c)(Per diode) + P(diode 2) x Rth(c) STATIC ELECTRICAL CHARACTERISTICS (per diode) Symbol IR * Parameter Reverse leakage current Forward voltage drop Tests Conditions Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Pulse test : * tp = 380 µs, δ < 2% Min. Typ. Max. 0.15 Unit mA mA V VR = VRRM 45 IF = 5 A IF = 5 A IF = 10 A IF = 10 A 0.49 0.36 90 0.53 0.46 0.67 0.59 VF * To evaluate the conduction losses use the following equation : P = 0.33 x IF(AV) + 0.026 IF2(RMS) Fig. 1: Average forward power dissipation versus average forward current (per diode). PF(av)(W) 3.5 3.0 2.5 δ=1 δ = 0.05 δ = 0.1 δ = 0.2 δ = 0.5 Fig. 2: Average forward current versus ambient temperature (δ=0.5, per diode). IF(av)(A) 6 Rth(j-a)=Rth(j-c) 5 4 3 T TO-220AB/D²PAK 2.0 1.5 1.0 0.5 TO-220FPAB ISOWATT220AB 2 1 0 δ=tp/T T Rth(j-a)=15°C/W tp δ=tp/T IF(av) (A) 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 tp Tamb(°C) 50 75 100 125 150 0 25 2/7 STPS10L45CT/CG/CF/CFP Fig. 3: Normalized avalanche power derating versus pulse duration. PARM(tp) PARM(1µs) 1 Fig. 4: Normalized avalanche power derating versus junction temperature. PARM(tp) PARM(25°C) 1.2 1 0.1 0.8 0.6 0.01 0.4 0.2 0.001 0.01 0.1 1 tp(µs) 10 100 1000 Tj(°C) 0 0 25 50 75 100 125 150 Fig. 5-1: Non repetitive surge peak forward current versus overload duration (maximum values, per diode) (TO-220AB and D2PAK). Fig. 5-2: Non repetitive surge peak forward current versus overload duration (maximum values, per diode) (ISOWATT220AB, TO-220FPAB). IM(A) 80 70 60 50 IM(A) 100 90 80 70 60 50 40 30 20 IM 10 0 1E-3 Tc=25°C Tc=75°C Tc=25°C Tc=75°C 40 30 20 10 Tc=125°C t IM t Tc=125°C δ=0.5 t(s) 1E-2 1E-1 1E+0 δ=0.5 t(s) 0 1E-3 1E-2 1E-1 1E+0 Fig. 6-1: Relative variation of thermal impedance junction to case versus pulse duration. (TO-220AB and D2PAK). Zth(j-c)/Rth(j-c) 1.0 0.8 0.6 0.4 0.2 0.0 1E-3 δ = 0.5 Fig. 6-2: Relative variation of thermal impedance junction to case versus pulse duration. (ISOWATT220AB, TO-220FPAB). Zth(j-c)/Rth(j-c) 1.0 0.8 0.6 0.4 T Single pulse δ = 0.5 δ = 0.2 δ = 0.1 δ = 0.2 δ = 0.1 T 0.2 tp(s) 1E-2 1E-1 δ=tp/T tp Single pulse tp(s) δ=tp/T tp 1E+0 0.0 1E-3 1E-2 1E-1 1E+0 1E+1 3/7 STPS10L45CT/CG/CF/CFP Fig. 7: Reverse leakage current versus reverse voltage applied (typical values, per diode). IR(mA) 1E+2 Tj=150°C Fig. 8: Junction capacitance versus reverse voltage applied (typical values, per diode). C(pF) 1000 F=1MHz Tj=25°C 1E+1 1E+0 Tj=125°C Tj=100°C 100 1E-1 1E-2 1E-3 0 5 10 15 Tj=25°C VR(V) 20 25 30 35 40 45 10 1 2 5 VR(V) 10 20 50 Fig. 9: Forward voltage drop versus forward current (maximum values, per diode). Fig. 10: Thermal resistance junction to ambient versus copper surface under tab (Epoxy printed circuit board FR4, copper thickness: 35µm)( D2PAK). Rth(j-a) (°C/W) 80 100.0 IFM(A) Tj=150°C Typical values 70 60 50 40 30 20 VFM(V) 10.0 Tj=125°C 1.0 Tj=25°C 10 1.2 1.4 1.6 1.8 0.1 0.0 S(Cu) (cm²) 0 4 8 12 16 20 24 28 32 36 40 0.2 0.4 0.6 0.8 1.0 0 4/7 STPS10L45CT/CG/CF/CFP PACKAGE MECHANICAL DATA TO-220AB DIMENSIONS Millimeters Inches Min. Max. Min. Max. 4.40 4.60 0.173 0.181 1.23 1.32 0.048 0.051 2.40 2.72 0.094 0.107 0.49 0.70 0.019 0.027 0.61 0.88 0.024 0.034 1.14 1.70 0.044 0.066 1.14 1.70 0.044 0.066 4.95 5.15 0.194 0.202 2.40 2.70 0.094 0.106 10 10.40 0.393 0.409 16.4 typ. 0.645 typ. 13 14 0.511 0.551 2.65 2.95 0.104 0.116 15.25 15.75 0.600 0.620 6.20 6.60 0.244 0.259 3.50 3.93 0.137 0.154 2.6 typ. 0.102 typ. 3.75 3.85 0.147 0.151 REF. H2 Dia L5 C L7 L6 L2 F2 F1 L9 L4 F G1 G M E D A A C D E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 M Diam. PACKAGE MECHANICAL DATA TO-220FPAB REF. A H B Dia L6 L2 L3 L5 D F1 L4 F2 L7 F G1 G E A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia. DIMENSIONS Millimeters Inches Min. Max. Min. Max. 4.4 4.6 0.173 0.181 2.5 2.7 0.098 0.106 2.5 2.75 0.098 0.108 0.45 0.70 0.018 0.027 0.75 1 0.030 0.039 1.15 1.70 0.045 0.067 1.15 1.70 0.045 0.067 4.95 5.20 0.195 0.205 2.4 2.7 0.094 0.106 10 10.4 0.393 0.409 16 Typ. 0.63 Typ. 28.6 30.6 1.126 1.205 9.8 10.6 0.386 0.417 2.9 3.6 0.114 0.142 15.9 16.4 0.626 0.646 9.00 9.30 0.354 0.366 3.00 3.20 0.118 0.126 5/7 STPS10L45CT/CG/CF/CFP PACKAGE MECHANICAL DATA D2PAK DIMENSIONS Millimeters Inches Min. Max. Min. Max. 4.40 4.60 0.173 0.181 2.49 2.69 0.098 0.106 0.03 0.23 0.001 0.009 0.70 0.93 0.027 0.037 1.14 1.70 0.045 0.067 0.45 0.60 0.017 0.024 1.23 1.36 0.048 0.054 8.95 9.35 0.352 0.368 10.00 10.40 0.393 0.409 4.88 5.28 0.192 0.208 15.00 15.85 0.590 0.624 1.27 1.40 0.050 0.055 1.40 1.75 0.055 0.069 2.40 3.20 0.094 0.126 0.40 typ. 0.016 typ. 0° 8° 0° 8° A E L2 C2 REF. A A1 A2 B B2 C C2 D E G L L2 L3 M R V2 D L L3 A1 B2 B G A2 C R M * V2 * FLAT ZONE NO LESS THAN 2mm FOOT PRINT DIMENSIONS (in millimeters) 16.90 10.30 1.30 5.08 3.70 8.90 6/7 STPS10L45CT/CG/CF/CFP PACKAGE MECHANICAL DATA ISOWATT220AB DIMENSIONS Millimeters Inches Min. Max. Min. Max. 4.40 4.60 0.173 0.181 2.50 2.70 0.098 0.106 2.50 2.75 0.098 0.108 0.40 0.70 0.016 0.028 0.75 1.00 0.030 0.039 1.15 1.70 0.045 0.067 1.15 1.70 0.045 0.067 4.95 5.20 0.195 0.205 2.40 2.70 0.094 0.106 10.00 10.40 0.394 0.409 16.00 typ. 0.630 typ. 28.60 30.60 1.125 1.205 9.80 10.60 0.386 0.417 15.90 16.40 0.626 0.646 9.00 9.30 0.354 0.366 3.00 3.20 0.118 0.126 REF. A B D E F F1 F2 G G1 H L2 L3 L4 L6 L7 Diam Ordering type STPS10L45CT STPS10L45CFP STPS10L45CG STPS10L45CG-TR STPS10L45CF s s s s Marking STPS10L45CT STPS10L45CFP STPS10L45CG STPS10L45CG STPS10L45CF Package TO-220AB TO-220FPAB D²PAK D²PAK ISOWATT220AB Weight 2.23g 2g 1.48g 1.48g 2.08g Base qty 50 50 50 1000 50 Delivery mode Tube Tube Tube Tape & reel Tube Cooling method : by conduction (C) Recommended torque value : 0.55 N.m. Maximum torque value : 0.70 N.m. Epoxy meets UL94,V0 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 2003 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 7/7