STPS10M60SFY

STPS10M60SFY Datasheet Automotive 60 V low VF power Schottky rectifier Features • • • • • • AEC-Q101 qualified Low forward voltage drop Negligible switching losses Avalanche capability specified 175 °C maximum junction temperature VRRM guaranteed from -40 °C to 175 °C • • Wettable flanks for automatic visual inspection PPAP capable • ECOPACK®2 compliant component Application • • • • DC/DC converters Reverse polarity protection Freewheeling diodes Switching diodes Description Product status link STPS10M60SFY Product summary Symbol Value IF(AV) 10 A VRRM 60 V Tj (max.) 175 °C VF (typ.) 0.53 V The STPS10M60SFY power Schottky rectifier has been designed for automotive applications. Packaged in PSMC (TO-277A), this device provides a very low VF in a compact package which can withstand high operating junction temperature. DS12672 - Rev 1 - August 2018 For further information contact your local STMicroelectronics sales office. www.st.com STPS10M60SFY Characteristics 1 Characteristics Table 1. Absolute ratings (limiting values at 25 °C, unless otherwise specified with 2 anode terminals short-circuited) Symbol Parameter Value Unit 60 V VRRM Repetitive peak reverse voltage (Tj = -40 °C to +175 °C) IF(AV) Average forward current, δ = 0.5 Tc = 145 °C 10 A IFSM Surge non repetitive forward current tp = 10 ms sinusoidal 230 A PARM Repetitive peak avalanche power tp = 10 µs, Tj = 125 °C 258 W -65 to +175 °C -40 to +175 °C Tstg Storage temperature range Tj Operating junction temperature range(1) 1. (dPtot/dTj) < (1/Rth(j-a)) condition to avoid thermal runaway for a diode on its own heatsink. Table 2. Thermal resistance parameters Symbol Rth(j-c) Parameter Junction to case Typ. Unit 2.0 °C/W For more information, please refer to the following application note: • AN5088: Rectifiers thermal management, handling and mounting recommendations Table 3. Static electrical characteristics (anode terminals short-circuited) Symbol IR(1) Parameter Reverse leakage current Test conditions Tj = 25 °C Tj = 125 °C Tj = 25 °C VF(2) Forward voltage drop Tj = 125 °C Tj = 25 °C Tj = 125 °C VR = VRRM IF = 5 A IF = 10 A Min. Typ. - 8 - Unit 50 µA 25 mA 0.56 0.43 - Max. 0.49 0.65 0.53 V 0.60 1. Pulse test: tp = 5 ms, δ < 2% 2. Pulse test: tp = 380 µs, δ < 2% To evaluate the conduction losses, use the following equation: P = 0.38 x IF(AV) + 0.022 x IF2(RMS) For more information, please refer to the following application notes related to the power losses: • AN604: Calculation of conduction losses in a power rectifier • AN4021: Calculation of reverse losses in a power diode DS12672 - Rev 1 page 2/11 STPS10M60SFY Characteristics (curves) 1.1 Characteristics (curves) Figure 2. Relative variation of thermal impedance junction to case versus pulse duration Figure 1. Average forward current versus case temperature (δ = 0.5) 40 IF(AV)(A) 1.0 Zth(j-c) /Rth(j-c) 0.9 35 0.8 30 0.7 25 0.6 20 0.5 0.4 15 0.3 10 T 0.2 Single pulse 5 δ=tp/T 0 0 25 0.1 T c(°C) tp 50 75 100 125 150 175 Figure 3. Reverse leakage current versus reverse voltage applied (typical values) 1.E+05 IR(µA) 0.0 1.E-04 t P(s) 1.E-03 1.E-02 1.E-01 Figure 4. Junction capacitance versus reverse voltage applied (typical values) 1000 C(pF) F = 1 MHz VOSC = 30 mVRMS Tj = 25 °C Tj = 150 °C 1.E+04 1.E+00 Tj = 125 °C 1.E+03 Tj = 100 °C Tj = 75 °C 1.E+02 Tj = 50 °C 1.E+01 Tj = 25 °C 1.E+00 VR(V) VR(V) 1.E-01 0 DS12672 - Rev 1 5 10 15 20 25 30 35 40 45 50 55 100 60 1 10 100 page 3/11 STPS10M60SFY Characteristics (curves) Figure 5. Forward voltage drop versus forward current (typical values) 100.0 Figure 6. Normalized avalanche power derating versus pulse duration (Tj = 125 °C) IF(A) 1 PARM (t p ) PARM (10 µs) 10.0 0.1 Tj = 25 °C 1.0 Tj = 75 °C 0.01 Tj = 125 °C Tj = -40 °C Tj = 150 °C 0.1 0.0 VF(V) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.001 0.8 t p(µs) 1 10 100 1000 Figure 7. Thermal resistance junction to ambient versus copper surface under tab (typical values, epoxy printed board FR4, eCu = 35 µm) (PSMC (TO-277A)) 120 Rth(j-a) (°C/W) PSMC (TO-277A) 100 80 60 40 20 SCu (cm²) 0 0 DS12672 - Rev 1 1 2 3 4 5 6 7 8 9 10 page 4/11 STPS10M60SFY Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 2.1 PSMC (TO-277A) package information • • Epoxy meets UL94,V0 Cooling method : by conduction (C) Figure 8. PSMC (TO-277A) package outline Table 4. PSMC (TO-277A) package mechanical data Dimensions Ref. Millimeters Inches (for reference only) Min. Typ. Max. Min. Typ. Max. A 1.00 1.10 1.20 0.039 0.043 0.047 b 1.05 1.20 1.35 0.041 0.047 0.053 b2 1.90 2.05 2.20 0.075 0.081 0.087 b4 0.75 0.029 C 0.15 0.23 0.40 0.006 0.009 0.016 D 4.45 4.60 4.75 0.175 0.181 0.187 D1 4.25 4.40 4.45 0.167 0.173 0.175 D2 3.40 3.60 3.70 0.134 0.142 0.146 DS12672 - Rev 1 page 5/11 STPS10M60SFY PSMC (TO-277A) package information Dimensions Ref. Millimeters Inches (for reference only) Min. Typ. Max. Min. Typ. Max. E 6.35 6.50 6.65 0.250 0.256 0.262 E1 6.05 6.10 6.15 0.238 0.240 0.242 E2 4.50 4.60 4.70 0.177 0.181 0.185 E3 3.94 1.55 e 2.13 0.084 e1 3.33 0.131 G 1.20 0.047 G1 0.70 0.027 L 0.90 1.05 1.24 0.035 L4 0.02 0.0008 L5 0.02 0.0008 0.041 0.049 Figure 9. PSMC (TO-277A) package footprint in mm (in inches) DS12672 - Rev 1 page 6/11 STPS10M60SFY PSMC (TO-277A) package information Figure 10. PSMC (TO-277A) marking Figure 12. Tape and reel orientation Figure 11. Package orientation in reel Figure 13. 13'' reel dimension values DS12672 - Rev 1 Figure 14. Inner box dimension values page 7/11 STPS10M60SFY PSMC (TO-277A) package information Figure 15. Tape outline Table 5. Tape dimension values Dimensions Ref. DS12672 - Rev 1 Millimeters Min. Typ. Max. D0 1.5 1.55 1.6 D1 1.5 F 5.45 5.5 5.55 K0 1.3 1.4 1.5 P0 3.9 4.0 4.1 P1 7.9 8.0 8.1 P2 1.95 2.0 2.05 W 11.7 12 12.3 page 8/11 STPS10M60SFY Ordering information 3 Ordering information Table 6. Ordering information DS12672 - Rev 1 Order code Marking Package Weight Base qty. Delivery mode STPS10M60SFY S10M60Y PSMC (TO-277A) 90 mg 6000 Tape and Reel page 9/11 STPS10M60SFY Revision history Table 7. Document revision history DS12672 - Rev 1 Date Version 06-Aug-2018 1 Changes Initial release. page 10/11 STPS10M60SFY IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved DS12672 - Rev 1 page 11/11