STPS30H60C
Power Schottky rectifier
Features
■
High junction temperature capability
■
Avalanche rated
■
Low leakage current
■
Good trade-off between leakage current and
forward voltage drop
■
High frequency operation
A1
K
A2
A2
K
A1
TO-220FPAB
STPS30H60CFP
Description
Dual centre tab Schottky rectifier suited for high
frequency switch mode power supply.
Packaged in TO-220FPAB, TO-220AB, TO-247,
I2PAK, and D2PAK, this device is intended to be
used in notebook and LCD adaptors and desktop
SMPS. In these applications the STPS30H60C
provides a good margin between the remaining
voltages applied on the diode and the voltage
capability of the diode.
A2
A2
K
K
A1
TO-220AB
STPS30H60CT
A1
I2PAK
STPS30H60CR
K
A2
A1
A2
K
A1
D2PAK
STPS30H60CG
Table 1.
July 2011
Doc ID 12123 Rev 3
TO-247
STPS30H60CW
Device summary
Symbol
Value
IF(AV)
2 X 15 A
VRRM
60 V
Tj
175 °C
VF (typ)
0.535 V
1/11
www.st.com
11
Characteristics
STPS30H60C
1
Characteristics
Table 2.
Absolute ratings (limiting values per diode)
Symbol
Parameter
VRRM
Repetitive peak reverse voltage
IF(RMS)
Forward rms current
Average forward current, δ = 0.5
V
30
A
Total package
30
TO-220FPAB
Tc = 125 °C
Per diode
15
TO-220FPAB
Tc = 90 °C
Total package
A
A
Surge non repetitive forward current
tp = 10 ms sinusoidal
PARM
Releative peak avalanche power
Tj = 25 °C
Tj
60
15
IFSM
Tstg
Unit
Per diode
TO-220AB
Tc = 155 °C
IF(AV)
Value
30
230
tp = 1 µs
Storage temperature range
A
10 200
W
-65 to + 175
°C
175
°C
Value
Unit
Maximum operating junction temperature(1)
1
dPtot <
condition to avoid thermal runaway for a diode on its own heatsink
Rth(j-a)
dTj
1.
Table 3.
Thermal parameters
Symbol
Parameter
I2PAK,
TO-220AB,
D2PAK, TO-247
Rth(j-c)
Junction to case
TO-220FPAB
Rth(c)
Table 4.
Symbol
IR(1)
Coupling
1.5
Total
0.8
Per diode
4.7
Total
3.95
TO-220AB, I2PAK, D2PAK, TO-247
0.1
TO-220FPAB
3.2
Parameter
Reverse leakage current
Test conditions
Tj = 25 °C
Tj = 125 °C
Tj = 125 °C
Forward voltage drop
Tj = 25 °C
Tj = 125 °C
Tj = 25 °C
Tj = 125 °C
VR = VRRM
IF = 7.5 A
IF = 15 A
IF = 30 A
Min.
Typ.
8
Max.
µA
25
mA
550
435
470
660
535
570
820
635
690
1. Pulse test: tp = 5 ms, δ < 2%
To evaluate the conduction losses use the following equation: P = 0.45 x IF(AV) + 0.008 x IF2(RMS)
Doc ID 12123 Rev 3
Unit
60
2. Pulse test: tp = 380 µs, δ < 2%
2/11
°C/W
Static electrical characteristics
Tj = 25 °C
VF(2)
Per diode
mV
STPS30H60C
Figure 1.
Characteristics
Conduction losses versus
average forward current
Figure 2.
PF(AV)(W)
12
δ=0.1
δ=0.05
δ=0.5
δ=0.2
18
Average forward current versus
ambient temperature
(δ = 0.5, per diode)
IF(AV)(A)
δ=1
Rth(j-a)=Rth(j-c)
16
10
14
TO-220FPAB
12
8
10
6
8
T
4
2
2
IF(AV)(A)
δ=tp/T
0
2
Figure 3.
4
6
8
10
12
14
Tamb(°C)
tp
0
0
1
Rth(j-a)=15 °C/W
6
4
16
0
18
Normalized avalanche power
derating versus pulse duration
25
Figure 4.
PARM(tp)
PARM(1µs)
1.2
50
75
100
125
150
175
Normalized avalanche power
derating versus junction
temperature
PARM(Tj)
PARM(25 °C)
1
0.1
0.8
0.6
0.4
0.01
0.2
tp(µs)
0.001
0.01
0.1
Figure 5.
200
1
10
1000
100
Non repetitive surge peak forward
current versus overload duration
(maximum values, per diode)
Tj(°C)
0
25
50
Figure 6.
IM(A)
2
2
TO-220AB, TO-247 D PAK, I PAK
180
120
75
100
Non repetitive surge peak forward
current versus overload duration
(maximum values, per diode)
IM(A)
TO-220FPAB
100
160
140
TC=50°C
80
TC=50 °C
120
100
TC=75°C
60
80
TC=75 °C
40
60
40
20
0
1.E-03
150
125
TC=125°C
20
IM
t
δ =0.5
t(s)
t
δ =0.5
t(s)
1.E-02
TC=125 °C
IM
1.E-01
1.E+00
0
1.E-03
Doc ID 12123 Rev 3
1.E-02
1.E-01
1.E+00
3/11
Characteristics
Figure 7.
1.0
STPS30H60C
Relative variation of thermal
Figure 8.
impedance junction to case versus
pulse duration
Zth(j-c)/Rth(j-c)
0.9
0.7
TO-220FPAB
0.9
0.8
0.7
δ=0.5
0.6
0.6
0.5
0.5
0.4
δ=0.2
0.3
δ=0.1
δ=0.5
0.4
δ=0.2
0.3
T
0.2
0.1
Zth(j-c)/Rth(j-c)
1.0
TO-220AB, TO-247 D2PAK, I2PAK
0.8
Relative variation of thermal
impedance junction to case versus
pulse duration
Single pulse
δ=tp/T
tp(s)
T
δ=0.1
0.2
0.1
tp
δ=tp/T
tp(s)
Single pulse
0.0
tp
0.0
1.E-03
1.E-02
Figure 9.
1.E-01
1.E+00
Reverse leakage current versus
reverse voltage applied
(typical values, per diode)
1.E-03
1.E-02
1.E-01
1.E+00
1.E+01
Figure 10. Junction capacitance versus
reverse voltage applied
(typical values, per diode)
IR(mA)
C(nF)
1.E+02
10.0
Tj=150°C
1.E+01
F=1MHz
Vosc=30mVRMS
Tj=25°C
Tj=125°C
Tj=100°C
1.E+00
1.0
Tj=75°C
1.E-01
Tj=50°C
1.E-02
Tj=25°C
VR(V)
VR(V)
1.E-03
0
5
10
15
20
25
30
35
40
45
0.1
50
55
60
Figure 11. Forward voltage drop versus
forward current (per diode)
100
1
IFM(A)
10
100
Figure 12. Thermal resistance junction to
ambient versus copper surface
under tab
80
Rth(j-a)(°C/W)
D2PAK
epoxy printed board FR4, copper thickness = 35 µm
TJ=125 °C
Maximum values
70
60
TJ=125 °C
Typical values
TJ=25 °C
Maximum values
50
10
40
30
20
10
VFM(V)
S(cm²)
1
0
0.0 0.1
4/11
0.2 0.3 0.4 0.5
0.6 0.7 0.8
0.9 1.0 1.1 1.2
1.3 1.4
0
Doc ID 12123 Rev 3
5
10
15
20
25
30
35
40
STPS30H60C
2
Package information
Package information
●
Epoxy meets UL94, V0
●
Cooling method: by conduction (C)
●
Recommended torque values:
– TO-220FPAB and TO-220AB 0.4 to 0.6 N·m
– TO-247 0.9 to 1.2 N·m
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Table 5.
TO-220FPAB dimensions
Dimensions
Ref.
A
B
H
Dia
L6
L7
L2
L3
L5
F1
L4
Inches
Min.
Max.
Min.
Max.
A
4.4
4.6
0.173
0.181
B
2.5
2.7
0.098
0.106
D
2.5
2.75
0.098
0.108
E
0.45
0.70
0.018
0.027
F
0.75
1
0.030
0.039
F1
1.15
1.70
0.045
0.067
F2
1.15
1.70
0.045
0.067
G
4.95
5.20
0.195
0.205
G1
2.4
2.7
0.094
0.106
H
10
10.4
0.393
0.409
D
F2
F
Millimeters
L2
E
G1
G
Doc ID 12123 Rev 3
16 Typ.
0.63 Typ.
L3
28.6
30.6
1.126
1.205
L4
9.8
10.6
0.386
0.417
L5
2.9
3.6
0.114
0.142
L6
15.9
16.4
0.626
0.646
L7
9.00
9.30
0.354
0.366
Dia.
3.00
3.20
0.118
0.126
5/11
Package information
Table 6.
STPS30H60C
TO-220AB dimensions
Dimensions
Ref
A
H2
Dia
C
L5
L7
L6
L2
F2
F1
L4
F
Min.
Max.
Min.
Max.
A
4.40
4.60
0.173
0.181
C
1.23
1.32
0.048
0.051
D
2.40
2.72
0.094
0.107
E
0.49
0.70
0.019
0.027
F
0.61
0.88
0.024
0.034
F1
1.14
1.70
0.044
0.066
F2
1.14
1.70
0.044
0.066
G
4.95
5.15
0.194
0.202
G1
2.40
2.70
0.094
0.106
H2
10
10.40
0.393
0.409
L2
M
E
G
0.645 typ.
13
14
0.511
0.551
L5
2.65
2.95
0.104
0.116
L6
15.25
15.75
0.600
0.620
L7
6.20
6.60
0.244
0.259
L9
3.50
3.93
0.137
0.154
Diam.
Doc ID 12123 Rev 3
16.4 typ.
L4
M
6/11
Inches
D
L9
G1
Millimeters
2.6 typ.
3.75
3.85
0.102 typ.
0.147
0.151
STPS30H60C
Package information
Table 7.
TO-247 dimensions
Dimensions
Ref
Millimeters
Min.
V
V
Dia
A
H
L5
L2
Max.
Min.
Typ.
Max.
A
4.85
5.15
0.191
0.203
D
2.20
2.60
0.086
0.102
E
0.40
0.80
0.015
0.031
F
1.00
1.40
0.039
0.055
F1
3.00
0.118
F2
2.00
0.078
F3
2.00
2.40
0.078
0.094
F4
3.00
3.40
0.118
0.133
G
L
Typ.
Inches
10.90
0.429
H
15.45
15.75 0.608
0.620
L
19.85
20.15 0.781
0.793
L1
3.70
4.30
0.169
L4
F2
F1
L1
F3
V2
F4
D
L3
L2
F(x3)
M
G
E
L3
0.145
18.50
14.20
0.728
14.80 0.559
0.582
L4
34.60
1.362
L5
5.50
0.216
M
2.00
3.00
0.078
0.118
V
5°
5°
V2
60°
60°
Dia.
Doc ID 12123 Rev 3
3.55
3.65
0.139
0.143
7/11
Package information
Table 8.
STPS30H60C
I2PAK dimensions
Dimensions
Ref.
A
E
c2
L2
D
L1
A1
b1
L
b
c
Millimeters
Inches
Min.
Max.
Min.
Max.
A
4.40
4.60
0.173
0.181
A1
2.40
2.72
0.094
0.107
b
0.61
0.88
0.024
0.035
b1
1.14
1.70
0.044
0.067
c
0.49
0.70
0.019
0.028
c2
1.23
1.32
0.048
0.052
D
8.95
9.35
0.352
0.368
e
2.40
2.70
0.094
0.106
e1
4.95
5.15
0.195
0.203
E
10
10.40
0.394
0.409
L
13
14
0.512
0.551
L1
3.50
3.93
0.138
0.155
L2
1.27
1.40
0.050
0.055
e
e1
8/11
Doc ID 12123 Rev 3
STPS30H60C
Package information
Table 9.
D2PAK dimensions
Dimensions
Ref.
Millimeters
Inches
Min.
Max
Min.
Max.
A
4.40
4.60
0.173
0.181
A1
2.49
2.69
0.098
0.106
A2
0.03
0.23
0.001
0.009
B
0.70
0.93
0.027
0.037
B2
1.14
1.70
0.045
0.067
C
0.45
0.60
0.017
0.024
C2
1.23
1.36
0.048
0.054
D
8.95
9.35
0.352
0.368
E
10.00
10.40
0.393
0.409
G
4.88
5.28
0.192
0.208
L
15.00
15.85
0.590
0.624
L2
1.27
1.40
0.050
0.055
L3
1.40
1.75
0.055
0.069
M
2.40
3.20
0.094
0.126
A
E
C2
L2
D
L
L3
A1
B2
R
C
B
G
A2
M
*
V2
* FLAT ZONE NO LESS THAN 2mm
R
V2
0.40 typ.
0°
8°
0.016 typ.
0°
8°
Figure 13. Footprint (dimensions in millimeters)
16.90
10.30
5.08
1.30
8.90
Doc ID 12123 Rev 3
3.70
9/11
Ordering information
3
STPS30H60C
Ordering information
Table 10.
Ordering information
Order code
Package
Weight
Base qty
Delivery mode
STPS30H60CT
TO-220AB
2.23 g
50
Tube
STPS30H60CR
I2PAK
1.49 g
50
Tube
STPS30H60CG
D2
PAK
1.48 g
50
Tube
STPS30H60CG-TR STPS30H60CG-TR
D PAK
1.48 g
1000
Tape and reel
STPS30H60CW
STPS30H60W
TO-247
4.46 g
30
Tube
STPS30H60CFP
STPS30H60CFP
TO-220FPAB
2.00 g
50
Tube
STPS30H60CT
STPS30H60CR
STPS30H60CG
4
2
Revision history
Table 11.
10/11
Marking
Document revision history
Date
Revision
Changes
27-Feb-2006
1
First issue.
31-Mar-2007
2
Added TO-220FPAB package. Updated thermal
parameters in Table 2.
08-Jul-2011
3
Updated Table 2.
Doc ID 12123 Rev 3
STPS30H60C
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 12123 Rev 3
11/11
