STPS3H100AF
High voltage power Schottky rectifier
Datasheet - production data
Description
K
This high voltage Schottky barrier rectifier device
is packaged in SOD128Flat and designed for
high frequency miniature switched mode power
supplies and for board DC to DC converters.
A
Table 1: Device summary
SOD128Flat
Symbol
Value
IF(AV)
3A
VRRM
100 V
Tj(max.)
175 °C
VF(typ.)
0.57 V
Features
Negligible switching losses
High junction temperature capability
Low leakage current
Good trade-off between leakage current and
forward voltage drop
Avalanche specification
ECOPACK® compliant component
July 2016
DocID029497 Rev 1
This is information on a product in full production.
1/8
www.st.com
Characteristics
1
STPS3H100AF
Characteristics
Table 2: Absolute ratings (limiting values at 25 °C, unless otherwise specified)
Symbol
VRRM
Parameter
Value
Unit
Repetitive peak reverse volltage
100
V
3
A
IF(AV)
Average forward current
TL = 140 °C, δ = 0.5, square pulse
IFSM
Surge non repetitive forward
current
tp = 10 ms sinusoidal
75
tp = 8.3 ms sinusoidal
79
PARM
Repetitive peak avalanche
power
tp = 10 µs, Tj = 125 °C
172
W
Tstg
Storage temperature range
-65 to +175
°C
-40 to +175
°C
Tj
Operating junction temperature
range(1)
A
Notes:
(1)(dP
tot/dTj)
< (1/Rth(j-a)) condition to avoid thermal runaway for a diode on its own heatsink.
Table 3: Thermal parameters
Symbol
Rth(j-l)
Parameter
Max. value
Unit
16
°C/W
Junction to lead
Table 4: Static electrical characteristics
Symbol
IR(1)
Parameter
Test conditions
Reverse leakage current
Tj = 25 °C
Tj = 125 °C
Tj = 25 °C
VF(2)
Forward voltage drop
Tj = 125 °C
Tj = 25 °C
Tj = 125 °C
Min.
VR = 100 V
IF = 3 A
IF = 6 A
Typ.
-
0.6
-
Unit
1.5
µA
1.7
mA
0.76
0.57
-
Max.
0.61
0.84
0.64
0.68
Notes:
(1)Pulse
test: tp = 5 ms, δ < 2%
(2)Pulse
test: tp = 380 µs, δ < 2%
To evaluate the conduction losses use the following equation:
P = 0.54 x IF(AV) + 0.023 x IF2(RMS)
For more information, please refer to the following application notes related to the power
losses.
2/8
AN604 (Calculation of conduction losses in a power rectifier)
AN4021 (Calculation of reverse losses in a power diode)
DocID029497 Rev 1
V
STPS3H100AF
1.1
Characteristics
Characteristics (curves)
Figure 1: Average forward power dissipation
versus average forward current
Figure 2: Average forward current versus ambient
temperature (δ = 0.5)
12
2.5
IF(AV)(A)
PF(AV)(W)
Rth(j-a) = Rth(j-l)
δ = 0.05
δ = 0.2
δ = 0.1
δ = 0.5
10
δ= 1
2.0
8
1.5
6
1.0
4
T
0.5
IF(AV)(A)
0.0
0.0
0.5
1.0
1.5
δ = tp /T
2.0
2.5
T
2
tp
3.0
3.5
δ = tp/T
0
Figure 3: Normalized avalanche power derating
versus pulse duration (Tj = 125 °C)
1
PARM (t p )
PARM (10 µs)
Tamb(°C)
tp
0
25
50
75
100
125
150
175
Figure 4: Relative variation of thermal impedance
junction to lead versus pulse duration
Zth(j-l)/Rth(j-l)
1.0
0.9
0.8
0.7
0.1
0.6
0.5
0.4
0.01
0.3
0.2
Single pulse
t p (µs)
0.1
0.001
1
10
100
Figure 5: Reverse leakage current versus reverse
voltage applied (typical values)
1.E+04
tp(s)
0.0
1.E-04
1000
IR(µA)
1.E-03
1.E-02
1.E-01
1.E+01
Figure 6: Junction capacitance versus reverse
voltage applied (typical values)
1000
C(pF)
F = 1 MHz
VOSC = 30 mVRMS
Tj = 25 °C
Tj = 150 °C
1.E+03
1.E+00
Tj = 125 °C
1.E+02
Tj = 100 °C
Tj = 75 °C
1.E+01
100
Tj = 50 °C
1.E+00
Tj = 25 °C
1.E-01
VR(V)
VR(V)
10
1.E-02
0
10
20
30
40
50
60
70
80
90
100
DocID029497 Rev 1
1
10
100
3/8
Characteristics
STPS3H100AF
Figure 7: Forward voltage drop versus forward
current (typical values)
100.00
IF(A)
Figure 8: Thermal resistance junction to ambient
versus copper surface under each lead
(typical values)
200
Rth(j-a)(°C/W)
SOD128-Flat
10.00
150
Tj = 75 °C
Tj = 125 °C
1.00
100
Tj = 25 °C
Epoxy printed board FR4, eCu = 35 µm
0.10
50
SCu(cm²)
VF(V)
0.01
0.0
4/8
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
DocID029497 Rev 1
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
Package information
STPS3H100AF
2
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
2.1
Epoxy meets UL94, V0
Lead-free package
SOD128Flat package information
Figure 9: SOD128Flat package outline
DocID029497 Rev 1
5/8
Package information
STPS3H100AF
Table 5: SOD128Flat package mechanical data
Dimensions
Ref.
Millimeters
Inches
Min.
Max.
Min.
Max.
A
0.93
1.03
0.037
0.041
b
1.69
1.81
0.067
0.071
c
0.10
0.22
0.004
0.009
D
2.30
2.50
0.091
0.098
E
4.60
4.80
0.181
0.189
E1
3.70
3.90
0.146
0.154
L
0.55
0.85
0.026
0.033
L1
0.30 typ.
0.012 typ.
L2
0.45 typ.
0.018 typ.
Figure 10: SOD128Flat footprint in mm (inches)
6/8
DocID029497 Rev 1
Ordering information
STPS3H100AF
3
Ordering information
Table 6: Ordering information
4
Order code
Marking
Package
Weight
Base qty.
Delivery mode
STPS3H100AF
3H100
SOD128Flat
26.4 mg
3000
Tape and reel
Revision history
Table 7: Document revision history
Date
Revision
01-Jul-2016
1
Changes
Initial release.
DocID029497 Rev 1
7/8
STPS3H100AF
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2016 STMicroelectronics – All rights reserved
8/8
DocID029497 Rev 1
很抱歉,暂时无法提供与“STPS3H100AF”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 1+4.51440
- 10+4.41720
- 30+4.35240