STPS41H100CTY

STPS41H100C-Y Automotive low drop power Schottky rectifier Datasheet − production data Description $ Dual center tap Schottky rectifier designed for high frequency miniature switched mode power supplies such as adaptors and on board DC/DC converters for automotive applications. . $ . . Table 1. Device summary $ 'ð3$. $ 72$% $ $ . Symbol Value IF(AV) 2 x 20 A VRRM 100 V Tj(max) 175 °C VF (Typ) 0.62 V Features • Negligible switching losses • High junction temperature capability • Good trade off between leakage current and forward voltage drop • Low leakage current • Avalanche rated • AEC-Q101 qualified • PPAP capable • ECOPACK®2 compliant component on TO-220AB January 2015 This is information on a product in full production. DocID018564 Rev 2 1/9 www.st.com Characteristics 1 STPS41H100C-Y Characteristics Table 2. Absolute ratings (limiting values per diode at 25 °C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage, Tj = -40 °C 100 V IF(RMS) Forward rms current 30 A Per diode 20 Per device 40 IF(AV) Average forward current, δ = 0.5, Tc = 150 °C IFSM Surge non repetitive forward current tp = 10 ms sinusoidal 220 A Repetitive peak avalanche power tp = 10 µs, Tj = 125 °C 1300 W Storage temperature range -65 to +175 °C Operating junction temperature(2) -40 to +175 °C PARM (1) Tstg Tj A 1. For pulse time duration derating, please refer to Figure 3. More details regarding the avalanche energy measurements and diode validation in the avalanche are provided in the STMicroelectronics Application notes AN1768, “Admissible avalanche power of Schottky diodes” and AN2025, “Converter improvement using Schottky rectifier avalanche specification”. 1 dPtot < condition to avoid thermal runaway for a diode on its own heatsink Rth(j-a) dTj 2. Table 3. Thermal parameters Symbol Parameter Rth(j-c) Junction to case Rth(c) Coupling Value Per diode 1.5 Per device 0.8 Unit °C/W 0.1 When the diodes 1 and 2 are used simultaneously: ΔTj(diode 1) = P(diode1) x Rth(j-c)(Per diode) + P(diode 2) x Rth(c) Table 4. Static electrical characteristics (per diode) Symbol IR(1) Parameter Reverse leakage current Test conditions Tj = 25 °C Tj = 125 °C Tj = 25 °C VF(2) Forward voltage drop Tj = 125 °C Tj = 25 °C Tj = 125 °C VR = VRRM IF = 20 A IF = 40 A Min. Typ Max. Unit - - 10 µA - 3 10 mA - - 0.80 - 0.62 0.67 - - 0.90 - 0.70 0.76 1. Pulse test: tp = 5 ms, δ < 2% 2. Pulse test: tp = 380 µs, δ < 2% To evaluate the conduction losses use the following equation: P = 0.58 x IF(AV) + 0.0045 x IF2(RMS) 2/9 DocID018564 Rev 2 V STPS41H100C-Y Characteristics Figure 1. Average forward power dissipation versus average forward current (per diode) PF(av)(W) 16 22 d = 0.5 14 Rth(j-a)=Rth(j-c) 18 d=1 16 d = 0.1 10 IF(av)(A) 20 d = 0.2 12 Figure 2. Average forward current versus ambient temperature (δ = 0.5, per diode) 14 d = 0.05 12 8 10 6 8 4 6 T 2 IF(av)(A) d=tp/T 0 0 5 10 15 20 T 2 tp d=tp/T 0 0 25 Figure 3. Normalized avalanche power derating versus pulse duration 3$50W33$50—V  Rth(j-a)=50°C/W 4 Tamb(°C) tp 25 50 75 100 125 150 175 Figure 4. Relative variation of thermal impedance junction to case versus pulse duration (per diode) 1.0 Zth(j-c)/Rth(j-c) 0.9 0.8 0.7  0.6 d = 0.5 0.5  0.4 d = 0.2 0.3 d = 0.1 T 0.2 0.1 W3—V      Figure 5. Forward voltage drop vs. forward current (per diode) 100 IFM(A) Single pulse 1.E-02 d=tp/T tp 1.E-01 1.E+00 Figure 6. Reverse leakage current versus reverse voltage applied (typical values, per diode) 1.E+02 Tj=125°C (Maximum values) tp(s) 0.0 1.E-03 IR(mA) Tj=150°C 1.E+01 Tj=125°C 1.E+00 Tj=100°C Tj=125°C (Typical values) 10 1.E-01 Tj=25°C (Maximum values) Tj=75°C 1.E-02 Tj=50°C 1.E-03 Tj=25°C VFM(V) VR(V) 1.E-04 1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 DocID018564 Rev 2 10 20 30 40 50 60 70 80 90 100 3/9 9 Characteristics STPS41H100C-Y Figure 7. Junction capacitance vs. reverse voltage applied (typical values, per diode) 10.0 C(nF) Figure 8. Thermal resistance junction to ambient versus copper surface under tab  F=1MHz Vosc=30mV Tj=25°C 5WKMDƒ&: (SR[\SULQWHGERDUG)5H&X —P  'ð3$.    1.0    VR(V) 6FPð  0.1 1 4/9 10 100  DocID018564 Rev 2         STPS41H100C-Y 2 Package information Package information • Epoxy meets UL94, V0 • Lead-free package • Cooling method: by conduction (C) • Recommended torque value for TO-220AB: 0.55 N·m • Maximum torque value for TO-220AB: 0.7 N·m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Figure 9. D2PAK dimension definitions $ & / ( ' / $ / 5 & % % $ * 0 )ODW]RQHQROHVVWKDQPP DocID018564 Rev 2 9 5/9 9 Package information STPS41H100C-Y Table 5. D2PAK dimension values Dimensions Ref. Millimeters Min. Inches Typ. Max. Min. Typ. Max. A 4.40 4.60 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.037 B2 1.14 1.70 0.045 0.067 C 0.45 0.60 0.017 0.024 C2 1.23 1.36 0.048 0.054 D 8.95 9.35 0.352 0.368 E 10.00 10.40 0.393 0.409 G 4.88 5.28 0.192 0.208 L 15.00 15.85 0.590 0.624 L2 1.27 1.40 0.050 0.055 L3 1.30 1.75 0.051 0.069 M 2.29 2.79 0.090 0.110 R V2 0.40 typ. 0.016 typ. 0° 8° 0° 8° Figure 10. Footprint (dimensions in mm)        6/9 DocID018564 Rev 2 STPS41H100C-Y Package information Figure 11. TO-220AB dimension definitions A E ∅P Resin gate 0.5 mm max. protrusion(1) F Q H1 D D1 L30 L20 b1 J1 L1 L b e Resin gate 0.5 mm max. protrusion(1) e1 c (1) Resin gate position accepted in each of the two position shown as well as the symmetrical opposites Table 6. TO-220AB dimensions Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.17 0.18 b 0.61 0.88 0.024 0.035 b1 1.14 1.70 0.045 0.067 c 0.48 0.70 0.019 0.027 D 15.25 15.75 0.60 0.62 D1 1.27 typ. 0.05 typ. E 10 10.40 0.39 0.41 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.19 0.20 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.24 0.26 J1 2.40 2.72 0.094 0.107 L 13 14 0.51 0.55 L1 3.50 3.93 0.137 0.154 L20 16.40 typ. 0.64 typ. L30 28.90 typ. 1.13 typ. ∅P 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 DocID018564 Rev 2 7/9 9 Ordering information 3 STPS41H100C-Y Ordering information Table 7. Ordering information 4 Order code Marking Package Weight Base qty Delivery mode STPS41H100CGY-TR STPS41H100CGY D²PAK 1.48 g 1000 Tape and reel STPS41H100CTY STPS41H100CY TO-220AB 2.20 g 50 Tube Revision history Table 8. Revision history 8/9 Date Revision Changes 21-Oct-2011 1 Initial release. 14-Jan-2015 2 Added TO-220AB package information.Updated Table 2 and Figure 3. Removed Figure 4. DocID018564 Rev 2 STPS41H100C-Y IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved DocID018564 Rev 2 9/9 9