STT13005-K

STT13005 High voltage fast-switching NPN power transistor Features ■ ■ ■ High voltage capability Minimum lot-to-lot spread for reliable operation Very high switching speed Applications ■ ■ Electronic ballast for fluorescent lighting Flyback and forward single transistor low power converters 3 SOT-32 2 1 Description The device is manufactured using high voltage multi-epitaxial planar technology for high switching speeds and medium voltage capability. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA. The device is designed for use in lighting applications and low cost switch-mode power supplies. Figure 1. Internal schematic diagram Table 1. Device summary Marking T13005 T13005 Package SOT-32 SOT-32 Packaging Tube Bag Order codes STT13005 STT13005-K November 2009 Doc ID 13613 Rev 3 1/10 www.st.com 10 Electrical ratings STT13005 1 Electrical ratings Table 2. Symbol VCES VCEO VEBO IC ICM IB IBM Ptot Tstg TJ Absolute maximum ratings Parameter Collector-emitter voltage (VBE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Collector peak current (tP < 5 ms) Base current Base peak current (tP < 5 ms) Total dissipation at Tc = 25 °C Storage temperature Max. operating junction temperature Value 700 400 9 2 4 1 2 45 -65 to 150 150 Unit V V V A A A A W °C °C Table 3. Symbol RthJC Thermal data Parameter Thermal resistance junction-case Max Value 2.8 Unit °C/W 2/10 Doc ID 13613 Rev 3 STT13005 Electrical characteristics 2 Electrical characteristics Tcase = 25 °C unless otherwise specified. Table 4. Symbol ICES ICEO VEBO Electrical characteristics Parameter Collector cut-off current (VBE = 0) Collector cut-off current (IB = 0) Emitter-base voltage (IC = 0) Test conditions VCE = 700 V VCE = 700 V TC = 125 °C VCE = 400 V IE = 10 mA 9 Min. Typ. Max. 100 500 250 Unit µA µA µA V Collector-emitter VCEO(sus) (1) sustaining voltage (IB = 0) VCE(sat) (1) Collector-emitter saturation voltage IC = 10 mA IC = 0.5 A IC = 0.8 A IC = 1.6 A IC = 0.5 A IC = 0.8 A IC = 1.6 A IB = 125 mA _ IB = 0.2 A _ IB = 0.4 A IB = 125 mA _ IB = 0.2 A _ IB = 0.4 A 400 0.5 1 1.5 1 1.3 1.5 10 8 0.4 3.2 0.25 0.8 0.16 50 V V V V V V V VBE(sat) (1) Base-emitter saturation voltage hFE (1) DC current gain Resistive load Rise time Storage time Fall time Inductive load Storage time Fall time IC = 0.5 A _ VCE = 5 V IC = 2 A _ _ VCE = 5 V VCC= 125 V IC = 1 A IB1 = -IB2 = 0.2 A IB1 = 0.2 A IC = 1 A VBE(off) = -5 V L = 50 mH VClamp = 300 V tr ts tf ts tf 0.7 4.5 0.4 µs µs µs µs µs 1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 % Doc ID 13613 Rev 3 3/10 Electrical characteristics STT13005 2.1 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Derating curve Figure 4. DC current gain (VCE = 1 V) Figure 5. DC current gain (VCE = 5 V) Figure 6. Collector-emitter saturation voltage Figure 7. Base-emitter saturation voltage 4/10 Doc ID 13613 Rev 3 STT13005 Figure 8. Inductive load fall time Figure 9. Electrical characteristics Inductive load storage time Figure 10. Resistive load fall time Figure 11. Resistive load storage time Figure 12. Reverse biased SOA Doc ID 13613 Rev 3 5/10 Electrical characteristics STT13005 2.2 Test circuits Figure 13. Resistive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor Figure 14. Inductive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor 3. Fast recovery rectifier 6/10 Doc ID 13613 Rev 3 STT13005 Package mechanical data 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Doc ID 13613 Rev 3 7/10 Package mechanical data STT13005 8/10 Doc ID 13613 Rev 3 STT13005 Revision history 4 Revision history Table 5. Date 29-May-2007 10-Jul-2008 03-Nov-2009 Document revision history Revision 1 2 3 Initial release Updated: VCEO(sus) condition in Table 4 on page 3, SOT-32 mechanical data Added order code STT13005-K Table 1 on page 1 Changes Doc ID 13613 Rev 3 9/10 STT13005 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 Doc ID 13613 Rev 3