STT13005D-K

STT13005D High voltage fast-switching NPN power transistor Features ■ Integrated antiparallel collector-emitter diode ■ High voltage capability ■ Minimum lot-to-lot spread for reliable operation ■ Very high switching speed Applications ■ Electronic ballast for fluorescent lighting ■ Flyback and forward single transistor low power converters 3 1 SOT-32 Figure 1. Description 2 Internal schematic diagram The device is manufactured using high voltage multi-epitaxial planar technology for high switching speeds and medium voltage capability. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA. The device is designed for use in lighting applications and low cost switch-mode power supplies. Table 1. Device summary Order codes Marking Package Packaging STT13005D T13005D SOT-32 Tube STT13005D-K T13005D SOT-32 Bag November 2009 Doc ID 14897 Rev 2 1/10 www.st.com 10 Electrical ratings 1 Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCES Collector-emitter voltage (VBE = 0) 700 V VCEO Collector-emitter voltage (IB = 0) 400 V VEBO Emitter-base voltage (IC = 0) 9 V Collector current 2 A Collector peak current (tP < 5 ms) 4 A Base current 1 A IBM Base peak current (tP < 5 ms) 2 A PTOT Total dissipation at Tc = 25 °C 45 W TSTG Storage temperature -65 to 150 °C 150 °C Value Unit 2.8 °C/W IC ICM IB TJ Table 3. Symbol RthJC 2/10 STT13005D Max. operating junction temperature Thermal data Parameter Thermal resistance junction-case Doc ID 14897 Rev 2 Max STT13005D 2 Electrical characteristics Electrical characteristics Tcase = 25 °C unless otherwise specified. Table 4. Symbol Electrical characteristics Parameter Test Conditions Min. Typ. Max. Unit ICES Collector cut-off current (VBE = 0) VCE = 700 V VCE = 700 V TC = 125 °C 100 500 µA µA ICEO Collector cut-off current (IB = 0) VCE = 400 V 250 µA VEBO Emitter-base voltage (IC = 0) IE = 10 mA 9 IC = 10 mA 400 Collector-emitter VCEO(sus) (1) sustaining voltage (IB = 0) V V VCE(sat) (1) Collector-emitter saturation voltage IC = 0.5 A IC = 0.8 A IC = 1.6 A IB = 125 mA _ IB = 0.2 A _ IB = 0.4 A 0.5 1 1.5 V V V VBE(sat) (1) Base-emitter saturation voltage IC = 0.5 A IC = 0.8 A IC = 1.6 A IB = 125 mA _ IB = 0.2 A _ IB = 0.4 A 1 1.3 1.5 V V V DC current gain IC = 0.5 A _ VCE = 5 V IC = 2 A _ _ VCE = 5 V tr ts tf Resistive load Rise time Storage time Fall time VCC= 125 V IC = 1 A IB1 = -IB2 = 0.2 A ts tf Inductive load Storage time Fall time IC = 1 A IB1 = 0.2 A L= 50 mH VBE(off) = -5 V VClamp = 300 V VF Diode forward voltage IF = 1 A hFE (1) 10 8 50 0.4 3.2 0.25 0.7 4.5 0.4 0.8 0.16 µs µs µs µs µs 2.5 V 1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 % Doc ID 14897 Rev 2 3/10 Electrical characteristics 2.1 4/10 STT13005D Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Derating curve Figure 4. DC current gain (VCE = 1 V) Figure 5. DC current gain (VCE = 5 V) Figure 6. Collector-emitter saturation voltage Figure 7. Base-emitter saturation voltage Doc ID 14897 Rev 2 STT13005D Electrical characteristics Figure 8. Inductive load fall time Figure 10. Resistive load fall time Figure 9. Inductive load storage tim Figure 11. Resistive load storage time Figure 12. Reverse biased SOA Doc ID 14897 Rev 2 5/10 Electrical characteristics 2.2 STT13005D Test circuits Figure 13. Resistive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor Figure 14. Inductive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor 3. Fast recovery rectifier 6/10 Doc ID 14897 Rev 2 STT13005D 3 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Doc ID 14897 Rev 2 7/10 Package mechanical data 8/10 STT13005D Doc ID 14897 Rev 2 STT13005D 4 Revision history Revision history Table 5. Document revision history Date Revision Changes 10-Jul-2008 1 Initial release. 03-Nov-2009 2 Added order code STT13005D-K Table 1 on page 1. Doc ID 14897 Rev 2 9/10 STT13005D Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 Doc ID 14897 Rev 2