STTH12R06DIRG

STTH12R06 Turbo 2 ultrafast high voltage rectifier Main product characteristics IF(AV) VRRM IRM (typ) Tj VF (typ) trr (max) 12 A 600 V 7A 175° C 1.4 V 25 ns K A K A K TO-220AC STTH12R06D TO-220FPAC STTH12R06FP Features and benefits K ■ ■ ■ ■ ■ Ultrafast switching Low reverse recovery current Low thermal resistance Reduces switching losses Package insulation voltage: TO220AC Ins: 2500 VRMS TO-220FPAC: 2000 VDC NC A K A D2PAK STTH12R06G TO-220AC Insulated STTH12R06DIRG Description The STTH12R06, which is using ST Turbo 2 600V technology, is specially suited as boost diode in continuous mode power factor corrections and hard switching conditions. This device is also intended for use as a free wheeling diode in power supplies and other power switching applications. Order codes Part Number STTH12R06D STTH12R06FP STTH12R06G STTH12R06G-TR STTH12R06DIRG Marking STTH12R06D STTH12R06FP STTH12R06G STTH12R06G STTH12R06DI August 2006 Rev 3 1/11 www.st.com 11 Charactersitics STTH12R06 1 Table 1. Symbol VRRM IF(RMS) Charactersitics Absolute Ratings (limiting values) Parameter Repetitive peak reverse voltage TO-220AC / TO-220FPAC / RMS forward voltage TO-220AC Ins. TO-220AC / D2PAK Average forward current δ = TO-220FPAC 0.5 TO-220AC Ins. Surge non repetitive forward current Storage temperature range Maximum operating junction temperature Tc = T125° C Tc = 50° C Tc = 80° C tp = 10 ms sinusoidal 100 -65 to + 175 175 A °C °C 12 A 24 D2 PAK Value 600 30 A Unit V IF(AV) IFSM Tstg Tj Table 2. Symbol Thermal Resistance Parameter TO-220AC / D2PAK Value (max). 1.7 4.4 3.3 °C/W Unit Rth(j-c) Junction to case TO-220FPAC TO-220AC Ins. Table 3. Symbol IR Static Electrical Characteristics Parameter Reverse leakage current Test conditions Tj = 25° C Tj = 125° C Forward voltage drop Tj = 25° C Tj = 125° C VR = VRRM Min. Typ Max. 45 µA 50 600 2.9 IF = 12 A V 1.4 1.8 Unit VF Table 4. Symbol trr IRM To evaluate the conduction losses use the following equation: P = 1.16 x IF(AV) + 0.053 IF2(RMS) Dynamic Characteristics Parameter Reverse recovery time Reverse recovery current VR = 400 V I = 12 A Tj = 125° C F dIF/dt = -200 A/µs dIF/dt = 96 A/µs I F = 12 A VFR = 1.1 x VFmax Tj = 25° C Test conditions IF = 0.5 A Irr = 0.25 A IR = 1 A IF = 1 A dIF/dt = -50 A/µs VR = 30 V 7.0 0.2 180 200 5.5 Tj = 25° C nC ns V Min Typ Max Unit 25 ns 45 8.4 A S factor Softness factor Qrr tfr VFP Reverse recovery charges Forward recovery time Forward recovery voltage 2/11 STTH12R06 Charactersitics Figure 1. P(W) 30 Conduction losses versus average current δ = 0.1 δ = 0.2 Figure 2. IFM(A) 120 Forward voltage drop versus forward current δ = 0.05 δ = 0.5 110 100 δ=1 Tj=125°C (maximum values) 25 90 80 70 Tj=125°C (typical values) 20 15 60 50 Tj=25°C (maximum values) 10 40 T 5 30 20 IF(AV)(A) 0 0 1 2 3 4 5 6 7 8 9 10 11 δ=tp/T 12 13 14 10 tp 15 VFM(V) 0 1 2 3 4 5 6 0 Figure 3. Figure 4. Relative variation of thermal impedance junction to case versus pulse duration (TO-220AC, TO-220AC Ins, D2PAK)) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 Relative variation of thermal impedance junction to case versus pulse duration (TO-220FPAC) Zth(j-c)/Rth(j-c) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 1.E-03 1.E-02 1.E-01 Single pulse Zth(j-c)/Rth(j-c) 0.3 T T 0.2 0.1 Single pulse tp(s) δ=tp/T tp 1.E+00 tp(s) 1.E-02 1.E-01 0.0 1.E-03 δ=tp/T 1.E+00 tp 1.E+01 Figure 5. IRM(A) 26 24 22 20 18 16 14 12 10 8 6 4 2 0 0 VR=400V Tj=125°C Peak reverse recovery current versus dIF/dt (typical values) Figure 6. trr(ns) 80 Reverse recovery time versus dIF/dt (typical values) VR=400V Tj=125°C IF=2 x IF(AV) 70 60 50 IF=2 x IF(AV) IF=IF(AV) IF=0.5 x IF(AV) IF=IF(AV) IF=0.5 x IF(AV) IF=0.25 x IF(AV) 40 30 20 10 dIF/dt(A/µs) 0 200 400 600 800 1000 0 200 400 dIF/dt(A/µs) 600 800 1000 3/11 Charactersitics STTH12R06 Figure 7. Qrr(nC) 500 450 400 VR=400V Tj=125°C Reverse recovery charges versus dIF/dt (typical values) Figure 8. S factor 0.50 0.45 IF≤2 x IF(AV) VR=400V Tj=125°C Softness factor versus dIF/dt (typical values) IF=2 x IF(AV) 0.40 0.35 350 300 250 200 150 0.20 100 50 0 0 200 400 600 800 1000 0.15 IF=0.5 x IF(AV) IF=IF(AV) 0.30 0.25 dIF/dt(A/µs) 0.10 0 200 dIF/dt(A/µs) 400 600 800 1000 Figure 9. Relative variations of dynamic parameters versus junction temperature Figure 10. Transient peak forward voltage versus dIF/dt (typical values) VFP(V) 12 11 10 IF=IF(AV) Tj=125°C 2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 25 50 75 100 125 QRR IRM IF=IF(AV) VR=400V Reference: Tj=125°C S factor 9 8 7 6 5 4 3 2 1 0 0 100 200 300 400 500 Tj(°C) dIF/dt(A/µs) Figure 11. Forward recovery time versus dIF/dt (typical values) tfr(ns) 180 160 140 120 100 80 60 40 20 IF=IF(AV) VFR=1.1 x VF max. Tj=125°C Figure 12. Junction capacitance versus reverse voltage applied (typical values) C(pF) 100 F=1MHz VOSC=30mVRMS Tj=25°C dIF/dt(A/µs) 0 0 100 200 300 400 500 10 1 10 VR(V) 100 1000 4/11 STTH12R06 Package information Figure 13. Thermal resistance junction to ambient versus copper surface under tab (epoxy FR4, eCU = 35 µm) (D2PAK) Rth(j-a)(°C/W) 70 60 50 40 30 20 10 S(Cu)(cm²) 0 0 5 10 15 20 25 30 35 40 2 Package information ● ● ● ● Epoxy meets UL94, V0 Cooling method: by conduction (C) Recommended torque value: 0.8 Nm (TO-220FPAC) / 0.55 Nm (TO-220AC) Maximum torque value: 1.0 Nm (TO-220FPAC) / 0.70 Nm (TO-220AC) 5/11 Package information Table 5. TO-220AC dimensions STTH12R06 Dimensions Ref. Millimeters Min. A H2 ØI L5 L7 L6 L2 C A Inches Min. 0.173 0.048 0.094 0.019 0.024 0.044 0.194 0.393 Max. 0.181 0.051 0.107 0.027 0.034 0.066 0.202 0.409 Max. 4.60 1.32 2.72 0.70 0.88 1.70 5.15 10.40 4.40 1.23 2.40 0.49 0.61 1.14 4.95 10.00 C D E F F1 G F1 L9 L4 F D H2 L2 L4 16.40 typ. 13.00 2.65 15.25 6.20 3.50 14.00 2.95 15.75 6.60 3.93 0.645 typ. 0.511 0.104 0.600 0.244 0.137 0.551 0.116 0.620 0.259 0.154 M E L5 L6 G L7 L9 M Diam. I 2.6 typ. 3.75 3.85 0.102 typ. 0.147 0.151 6/11 STTH12R06 Table 6. TO-220FPAC Dimensions Package information Dimensions Ref. Millimeters Min. A A H B Inches Min. 0.173 0.098 0.098 0.018 0.030 0.045 0.195 0.094 0.393 Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.205 0.106 0.409 Max. 4.6 2.7 2.75 0.70 1 1.70 5.20 2.7 10.4 4.4 2.5 2.5 0.45 0.75 1.15 4.95 2.4 10 B D E Dia F L6 L2 L3 L5 F1 L4 D L7 F1 G G1 H L2 L3 16 Typ. 28.6 9.8 2.9 15.9 9.00 3.00 30.6 10.6 3.6 16.4 9.30 3.20 0.63 Typ. 1.126 0.386 0.114 0.626 0.354 0.118 1.205 0.417 0.142 0.646 0.366 0.126 F G1 G E L4 L5 L6 L7 Dia. 7/11 Package information Table 7. TO-220AC (NIns. & Ins. 20-up) Dimensions Dimensions Ref. Millimeters Min. A B ØI L F b2 C STTH12R06 Inches Min. Typ. Max. 0.625 0.147 Typ. Max. 15.20 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 4.80 6.20 3.75 15.90 0.598 a1 a2 B b1 14.00 0.511 10.40 0.393 0.88 0.024 1.32 0.048 4.60 0.173 0.70 0.019 2.72 0.094 5.40 0.189 6.60 0.244 3.85 0.147 0.551 0.409 0.034 0.051 0.181 0.027 0.107 0.212 0.259 0.151 A I4 b2 C c2 a1 l2 c1 c2 e a2 M b1 e c1 F ØI I4 L l2 M 15.80 16.40 16.80 0.622 0.646 0.661 2.65 1.14 2.60 2.95 0.104 1.70 0.044 0.102 0.116 0.066 8/11 STTH12R06 Table 8. D2PAK Dimensions Package information Dimensions Ref. Millimeters Min. A A E L2 C2 Inches Min. 0.173 0.098 0.001 0.027 0.045 0.017 0.048 0.352 0.393 0.192 0.590 0.050 0.055 0.094 Max. 0.181 0.106 0.009 0.037 0.067 0.024 0.054 0.368 0.409 0.208 0.624 0.055 0.069 0.126 Max. 4.60 2.69 0.23 0.93 1.70 0.60 1.36 9.35 10.40 5.28 15.85 1.40 1.75 3.20 4.40 2.49 0.03 0.70 1.14 0.45 1.23 8.95 10.00 4.88 15.00 1.27 1.40 2.40 A1 A2 B D L L3 A1 B2 B G A2 R B2 C C2 C D E G L M * V2 L2 L3 M R V2 * FLAT ZONE NO LESS THAN 2mm 0.40 typ. 0° 8° 0.016 typ. 0° 8° Figure 14. Footprint (dimensions in mm) 16.90 10.30 1.30 5.08 8.90 3.70 9/11 Ordering information STTH12R06 3 Ordering information Delivery mode Tube Tube Tape & reel Tube Tube Ordering type STTH12R06D STTH12R06G STTH12R066G-TR STTH12R06FP STTH12R06DIRG Marking STTH12R06D STTH12R06G STTH12R06G STTH12R06FP STTH12R06DI Package TO-220AC D PAK D PAK TO-220FPAC TO-220AC Ins. 2 2 Weight 1.90 g 1.48 g 1.48 g 1.70 g 1.86 g Base qty 50 50 1000 50 50 4 Revision history Date January-2002 18-Oct-2004 10-Aug-2006 Revision 1 2 3 First issue D2PAK and TO-220AC Insulated packages added Reformatted to current standard. Added Package insulation voltages on page 1 Changes 10/11 STTH12R06 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 11/11