STTH15AC06
Turbo 2 ultrafast high voltage rectifier
Datasheet − production data
Description
$
.
The STTH15AC06 uses ST Turbo 2 600 V
technology and is suited as a boost diode in air
conditioning equipment for continuous mode
interleaved power factor correction.
The device is also intended for use as a
freewheeling diode in power supplies and other
power switching applications.
Table 1. Device summary
$
.
72)3$&
Features
• Ultrafast switching
Symbol
Value
IF(AV)
15 A
VRRM
600 V
trr (typ)
40 ns
VF (typ)
1.15 V
Tj (max)
175 °C
• Low reverse current
• Reduces switching and conduction losses
• Low thermal resistance
• Insulated package TO-220FPAC:
– Insulated voltage: 2000 VRMS sine
April 2015
This is information on a product in full production.
DocID026243 Rev 2
1/8
www.st.com
8
Characteristics
1
STTH15AC06
Characteristics
Table 2. Absolute ratings (limiting values at 25 °C, unless otherwise specified)
Symbol
Parameter
Value
Unit
VRRM
Repetitive peak reverse voltage
600
V
IF(RMS)
Forward rms current
30
A
IF(AV)
Average forward current
15
A
IFSM
Surge non repetitive forward current
120
A
Tstg
Storage temperature range
-65 to +175
°C
175
°C
Tj
tp = 10 ms sinusoidal
Maximum operating junction temperature
Table 3. Thermal parameters
Symbol
Rth(j-c)
Parameter
Junction to case
Value
Unit
4.4
°C/W
Table 4. Static electrical characteristics
Symbol
Parameter
IR(1)
Reverse leakage current
VF(2)
Forward voltage drop
Test conditions
Tj = 25 °C
Tj = 150 °C
Tj = 25 °C
Tj = 150 °C
Min.
Typ.
Max.
Unit
2
VR = VRRM
µA
20
200
1.9
IF = 15 A
V
1.15
1.50
1. Pulse test: tp = 5 ms, δ < 2%
2. Pulse test: tp = 380 µs, δ < 2%
To evaluate the conduction losses use the following equation:
P = 1.2 x IF(AV) + 0.02 IF2(RMS)
Table 5. Dynamic characteristics
Symbol
trr
IRM
tfr
VFP
2/8
Test conditions
Parameter
Reverse recovery time
Reverse recovery current
Tj = 25 °C
IF = 0.5 A, Irr = 0.25 A, IR= 1 A
30
ns
IF = 1 A, VR = 30 V, dIF/dt = -50 A/µs
40
55
Tj = 125 °C
IF = 15 A, VR = 400 V,
dIF/dt = -100 A/µs
4.4
6
A
IF = 15 A, VFR = 1.6 V,
dIF/dt = 100 A/µs
300
ns
Tj = 25 °C
Forward recovery time
Forward recovery voltage
Min. Typ. Max. Unit
DocID026243 Rev 2
2.5
V
STTH15AC06
Characteristics
Figure 1. Average forward power dissipation
versus average forward current
PF(AV)(W)
30
Figure 2. Forward voltage drop versus forward
current (typical values)
IF(A)
100.0
δ = 0.2
δ = 0.1
δ = 0.05
δ=1
δ = 0.5
25
Tj = 150 °C
10.0
20
Tj = 25 °C
15
10
1.0
T
5
tp
δ =tp/T
IF(AV)(A)
VF(V)
0
0.1
0
2
4
6
8
10
12
14
16
18
Figure 3. Forward voltage drop versus forward
current (maximum values)
100.0
IF(A)
0.0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
Figure 4. Relative variation of thermal
impedance, junction to case, versus pulse
duration
1.0
Zth(j-c)/Rth(j-c)
Single pulse
TO-220FPAC
0.9
0.8
Tj = 150 °C
0.7
10.0
Tj = 25 °C
0.6
0.5
0.4
1.0
0.3
0.2
VF(V)
0.1
0.0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
Figure 5. Peak reverse recovery current versus
dIF/dt (typical values)
20
IRM(A)
0.1
1.E-02
1.E-01
1.E+00
1.E+01
1.E+02
Figure 6. Reverse recovery time versus dIF/dt
(typical values)
400
IF = 15 A
VR = 400 V
Tj = 125 °C
tp(s)
0.0
1.E-03
trr(ns)
IF = 15 A
VR = 400 V
Tj = 125 °C
350
16
300
250
12
200
8
150
100
4
dIF/dt(A/µs)
0
0
50
100
150
200
250
300
350
400
450
500
50
dIF/dt(A/µs)
0
0
50
DocID026243 Rev 2
100
150
200
250
300
350
400
450
500
3/8
Characteristics
STTH15AC06
Figure 7. Reverse recovery charges versus
dIF/dt (typical values)
Qrr(nC)
1000
3.0
IF = 15 A
VR = 400 V
Tj = 125 °C
800
Figure 8. Reverse recovery softness factor
versus dIF/dt (typical values)
SFACTOR
IF = 15 A
VR = 400 V
Tj = 125 °C
2.5
2.0
600
1.5
400
1.0
200
0.5
dIF/dt(A/µs)
dIF/dt(A/µs)
0.0
0
0
50
100
150
200
250
300
350
400
450
0
500
Figure 9. Relative variations of dynamic
parameters versus junction temperature
100
150
200
250
300
350
400
450
500
Figure 10. Transient peak forward voltage
versus dIF/dt (typical values)
1.2
10
IF=15 A
VR=400 V
Reference: Tj=125 °C
1.0
50
VFP(V)
IF = 15 A
Tj = 125 °C
8
0.8
SFACTOR
6
0.6
IRM
4
0.4
QRR
2
0.2
Tj(°C)
dIF/dt(A/µs)
0.0
25
50
75
100
125
0
50
100
150
200
250
300
350
400
450
500
Figure 11. Forward recovery time versus dIF/dt Figure 12. Junction capacitance versus reverse
(typical values)
voltage applied (typical values)
250
tfr(ns)
1000
C(pF)
F = 1 MHz
VOSC = 30 mV RMS
Tj = 25 °C
IF = 15 A
VFR = 1.6 V
Tj = 125 °C
200
150
100
100
50
dIF/dt(A/µs)
50
4/8
VR(V)
10
0
100
150
200
250
300
350
400
450
500
1
DocID026243 Rev 2
10
100
1000
STTH15AC06
2
Package information
Package information
•
Epoxy meets UL94, V0
•
Recommended torque value for TO-220FPAC: 0.55 N·m
•
Maximum torque value for TO-220FPAC: 0.7 N·m
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
2.1
TO-220FPAC package information
Figure 13. TO-220FPAC package outline
A
B
H
Dia
L6
L2
L7
L3
F1
D
L4
F
G1
E
G
DocID026243 Rev 2
5/8
Package information
STTH15AC06
Table 6. TO-220FPAC package mechanical data
Dimensions
Ref.
Millimeters
Min.
Max.
Min.
Typ.
Max.
A
4.4
4.6
0.173
0.181
B
2.5
2.7
0.098
0.106
D
2.5
2.75
0.098
0.108
E
0.45
0.70
0.018
0.027
F
0.75
1
0.030
0.039
F1
1.15
1.70
0.045
0.067
G
4.95
5.20
0.195
0.205
G1
2.4
2.7
0.094
0.106
H
10
10.4
0.393
0.409
L2
6/8
Typ.
Inches
16 Typ.
0.63 Typ.
L3
28.6
30.6
1.126
1.205
L4
9.8
10.6
0.386
0.417
L6
15.9
16.4
0.626
0.646
L7
9.00
9.30
0.354
0.366
Dia.
3.00
3.20
0.118
0.126
DocID026243 Rev 2
STTH15AC06
3
Ordering information
Ordering information
Table 7. Ordering information
4
Order code
Marking
Package
Weight
STTH15AC06FP
STTH15AC06FP
TO-220FPAC
1.8 g
Base qty Delivery mode
50
Tube
Revision history
Table 8. Document revision history
Date
Revision
Changes
17-Apr-2014
1
First release.
24-Apr-2015
2
Updated Features and Table 3.
DocID026243 Rev 2
7/8
STTH15AC06
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics – All rights reserved
8/8
DocID026243 Rev 2
很抱歉,暂时无法提供与“STTH15AC06FP”相匹配的价格&库存,您可以联系我们找货
免费人工找货