STTH30ACS06W

STTH30ACS06W Turbo 2 ultrafast high voltage rectifier Datasheet - production data Description $ . The STTH30ACS06W, which is ST Turbo 2 600 V technology, is suited as boost diode especially in air conditioning equipment for continuous mode interleaved power factor correction. The device is also intended for use as a freewheeling diode in power supplies and other power switching applications. $ . Table 1. Device summary '2 Symbol Value IF(AV) 30 A 600 V Features VRRM Tj (max) 175 °C • Ultrafast switching VF (typ) 1.45 V • Low reverse current trr (max) 30 ns • Low thermal resistance • Reduces switching and conduction losses September 2015 This is information on a product in full production. DocID028402 Rev 1 1/8 www.st.com Characteristics 1 STTH30ACS06W Characteristics Table 2. Absolute ratings (limiting values at Tj = 25 °C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 600 V IF(RMS) RMS forward current 50 A IF(AV) Average forward current 30 A IFSM Surge non repetitive forward current 190 A Tstg Storage temperature range -65 to +175 °C +175 °C Value Unit 1.2 °C/W tp = 10 ms sinusoidal Maximum operating junction temperature Tj Table 3. Thermal parameters Symbol Rth(j-c) Parameter Junction to case Table 4. Static electrical characteristics Symbol Parameter IR(1) Reverse leakage current VF(2) Forward voltage drop Test conditions Tj = 25 °C Tj = 150 °C Tj = 25 °C Tj = 150 °C Min. VR = VRRM IF = 30 A Typ. Max. - 5 30 300 - 2.4 1.45 1.9 Unit µA V 1. Pulse test: tp = 5 ms, δ < 2% 2. Pulse test: tp = 380 µs, δ < 2% To evaluate the conduction losses use the following equation: P = 1.42 x IF(AV) + 0.016 x IF2(RMS) Table 5. Dynamic electrical characteristics Symbol Parameter Test conditions Min. Typ. IF = 0.5 A, Irr = 0.25 A, IR = 1 A trr IRM tfr VFP 2/8 Reverse recovery time Reverse recovery current Tj = 25 °C Unit 30 ns IF = 1 A, VR = 30 V, dIF/dt = -50 A/µs 40 55 ns Tj = 125 °C IF = 30 A,dIF/dt = 200 A/µs, VR = 400 V 7.8 10.5 A IF = 30 A,dIF/dt = 200 A/µs, VFR = 2.8 V 300 ns Tj = 25 °C Forward recovery time Forward recovery voltage Max. DocID028402 Rev 1 3.5 V STTH30ACS06W Characteristics Figure 1. Average forward power dissipation versus average forward current 3)$9 :  į    į  į  Figure 2. Forward voltage drop versus forward current (typical values) ,)$ į   į  7  ƒ& M     7  ƒ& M    7  į WS7 , WS )$9         9 9 $   Figure 3. Forward voltage drop versus forward current (maximum values)  )         Figure 4. Relative variation of thermal impedance junction to case versus pulse duration = 5  WKMF WKMF  ,)$ '2     7  ƒ& M        9 9 )          Figure 5. Peak reverse recovery current versus dIF/dt (typical values)  6LQJOHSXOVH  7  ƒ& M ( (  WUUQV ,) $ 95 9 7M ƒ&   ( Figure 6. Reverse recovery time versus dIF/dt (typical values) ,50$ ,) $ 95 9 7M ƒ& W V 3  (         GO)GW$—V             GO)GW$—V   DocID028402 Rev 1           3/8 8 Characteristics STTH30ACS06W Figure 7. Reverse recovery charges versus dIF/dt (typical values) 4UUQ&   ,) 9 95 9 7M ƒ&   Figure 8. Softness factor versus dIF/dt (typical values) 6IDFWRU ,) 9 95 9 7  ƒ& M          GO)GW$—V             Figure 9. Relative variations of dynamic parameters versus junction temperature            Figure 10. Transient peak forward voltage versus dIF/dt (typical values)   ,) 9 95 9 5HIHUHQFH7  ƒ&  GO)GW$—V  9)39 ,) $ 7M ƒ& M   ,50   6IDFWRU  4UU    7Mƒ& GO)GW$—V                 Figure 11. Forward recovery time versus dIF/dt Figure 12. Junction capacitance versus reverse (typical values) voltage applied (typical values)  WIUQV &S)  ,) $ 9)5 9 7M ƒ& ) 0+] 9  P9 26&  506 7M ƒ&    GO)GW$—V   4/8        9 9  5   DocID028402 Rev 1    STTH30ACS06W 2 Package information Package information • Epoxy meets UL94, V0 • Cooling method by conduction (C) • Recommended torque value: 0.8 N·m • Maximum torque value: 1.0 N·m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 2.1 DO-247 package information Figure 13. DO-247 package outline V Dia V A H L5 L L2 L4 F2 L3 L1 F3 D V2 F G DocID028402 Rev 1 M E 5/8 8 Package information STTH30ACS06W Table 6. DO-247 package mechanical data Dimensions Ref. Millimeters Min. Max. Min. Typ. Max. A 4.85 5.15 0.191 0.203 D 2.20 2.60 0.086 0.102 E 0.40 0.80 0.015 0.031 F 1.00 1.40 0.039 0.055 F2 F3 2.00 2.00 G 0.078 2.40 0.078 10.90 0.094 0.429 H 15.45 15.75 0.608 0.620 L 19.85 20.15 0.781 0.793 L1 3.70 4.30 0.145 0.169 L2 L3 18.50 14.20 0.728 14.80 0.559 0.582 L4 34.60 1.362 L5 5.50 0.216 M 2.00 3.00 0.078 0.118 V 5° 5° V2 60° 60° Dia. 6/8 Typ. Inches 3.55 3.65 DocID028402 Rev 1 0.139 0.143 STTH30ACS06W 3 Ordering information Ordering information Table 7. Ordering information 4 Order code Marking Package Weight Base qty Delivery mode STTH30ACS06W STTH30ACS06W DO-247 1.8 g 50 Tube Revision history Table 8. Document revision history Date Revision 22-Sep-2015 1 Changes First issue. DocID028402 Rev 1 7/8 8 STTH30ACS06W IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved 8/8 DocID028402 Rev 1