STTH30R06
Turbo 2 ultrafast high voltage rectifier
Datasheet - production data
Description
This device uses ST Turbo 2 600 V technology,
and is particularly suited as boost diode in
discontinuous or critical mode power factor
corrections.
It is also intended for use as a freewheeling diode
in power supplies and other power switching
applications.
Table 1: Device summary
Features
Ultrafast switching
Low reverse current
Low thermal resistance
Reduce switching and conduction losses
June 2017
DocID10938 Rev 3
This is information on a product in full production.
Symbol
Value
IF(AV)
30 A
VRRM
600 V
Tj
175 °C
VF (typ.)
1.10 V
trr (max.)
50 ns
1/11
www.st.com
Characteristics
1
STTH30R06
Characteristics
Table 2: Absolute ratings (limiting values, at 25 °C, unless otherwise specified)
Symbol
Parameter
Value
Unit
VRRM
Repetitive peak reverse voltage
600
V
IF(RMS)
Forward rms current
50
A
IF(AV)
Average forward current
δ = 0.5, square wave
DO-247
TC = 115 °C
DOP-3I
TC = 85 °C
30
A
IFSM
Surge non repetitive forward current
tp = 10 ms sinusoidal
300
A
Tstg
Storage temperature range
-65 to +175
°C
175
°C
Tj
Maximum operating junction temperature
Table 3: Thermal parameters
Symbol
Parameter
Max. value
Junction to case
Rth(j-c)
DO-247
1.1
DOP-3I
1.7
Unit
°C/W
Table 4: Static electrical characteristics
Symbol
Parameter
Test conditions
IR(1)
Reverse leakage current
VF(2)
Forward voltage drop
Tj = 25 °C
Tj = 125 °C
Tj = 25 °C
Tj = 125 °C
VR = VRRM
IF = 30 A
Notes:
(1)Pulse
test: tp = 5 ms, δ < 2%
(2)Pulse
test: tp = 380 µs, δ < 2%
To evaluate the conduction losses, use the following equation:
P = 1.07 x IF(AV) + 0.011 x IF2(RMS)
2/11
DocID10938 Rev 3
Min.
Typ.
-
25
80
-
Max.
800
1.85
1.10
1.40
Unit
µA
V
STTH30R06
Characteristics
Table 5: Dynamic electrical characteristics
Symbol
trr
IRM
tfr
VFP
Parameter
Test conditions
Reverse recovery time
Reverse recovery current
Typ.
Max.
Unit
IF = 0.5 A
IR = 1 A
Irr = 0.25 A
-
IF = 1 A
VR = 30 V
dlF/dt = 50 A/µs
-
50
70
Tj = 125 °C
IF = 30 A
VR = 400 V
dlF/dt = 100 A/µs
-
8
11
A
IF = 30 A
VFR = 1.1 x VFmax.
dlF/dt = 100 A/µs
500
ns
Tj = 25 °C
Tj = 25 °C
Forward recovery time
Forward recovery voltage
Min.
DocID10938 Rev 3
50
ns
-
2.5
V
3/11
Characteristics
1.1
STTH30R06
Characteristics (curves)
Figure 2: Forward voltage drop versus forward
current
Figure 1: Conduction losses versus average
forward current
PF( AV )(W)
55
δ = 0.5
50
δ = 0.2
45
δ = 0.1
40
δ=1
δ = 0.05
35
30
25
20
15
T
10
5
IF( AV ) ( A)
δ=tp/T
tp
0
0
5
10
15
20
25
30
35
Figure 3: Relative variation of thermal impedance
junction to case versus pulse duration
Figure 4: Peak reverse recovery current versus
dlF/dt (typical values)
Zth (j-c) /Rth(j-c)
IRM(A)
1.0
30
25
0.8
IF =2 x I F(AV )
VR = 400 V
Tj = 125°C
0.9
IF =I F(AV )
IF =0.5 x I F(AV )
0.7
20
IF =0.25 x I F(AV )
0.6
15
0.5
0.4
10
0.3
5
0.2
Single pulse
t P (s)
0.1
dIF/dt(A/µs)
0
0
0.0
1.E -03
1.E -02
1.E -01
50
100
150
200
250
300
350
400
450
500
1.E +00
Figure 5: Reverse recovery time versus dlF/dt
(typical values)
Figure 6: Reverse recovery charges versus dlF/dt
(typical values)
Qrr(µC)
trr(ns)
3.0
20 0
VR = 400 V
Tj = 125°C
VR = 400 V
Tj = 125°C
2.5
IF =2 x I F(AV )
IF =2 x I F(AV )
15 0
2.0
IF =I F(AV )
IF =I F(AV )
IF =0.5 x I F(AV )
10 0
1.5
IF =0.5 x I F(AV )
1.0
50
0.5
dIF/dt(A/µs)
dIF/dt(A/µs)
0
0
2 00
40 0
60 0
800
10 00
0.0
0
4/11
DocID10938 Rev 3
200
400
600
800
1000
STTH30R06
Characteristics
Figure 7: Softness factor versus dlF/dt
(typical values)
Figure 8: Relative variation of dynamic parameters
versus junction temperature
Sfactor
2.50
0.6
IF ≤ 2 x IF(AV)
VR = 400 V
Tj = 125°C
0.5
IF≤ 2 x IF (AV)
VR = 400 V
Reference: T j = 125 °C
SFATOR
2.25
2.00
1.75
0.4
1.50
1.25
0.3
1.00
0.2
IRM
0.75
0.50
0.1
QRR
0.25
dIF/dt(A/µs)
0.0
Tj (°C)
0.00
0
50
100
150
200
250
300
350
400
450
5 00
25
Figure 9: Transient peak forward voltage versus
dlF/dt (typical values, per diode)
50
75
100
125
Figure 10: Forward recovery time versus dlF/dt
(typical values)
t FR(ns)
VFP(V)
8.0
800
7.5
IF = IF(AV)
Tj = 125°C
7.0
IF ≤ 2 x IF(AV)
VR = 1.1 x V max.
F
Tj = 125°C
700
6.5
6.0
600
5.5
5.0
500
4.5
4.0
400
3.5
3.0
300
2.5
2.0
200
1.5
1.0
100
0.5
dIF/dt(A/µs)
0.0
dIF/dt(A/µs)
0
0
10 0
20 0
300
400
500
0
10 0
200
300
400
Figure 11: Junction capacitance versus reverse
voltage applied (typical values)
1000
C(pF)
F=1MHz
VOSC =30mVRMS
Tj=25°C
100
VR(V)
10
1
10
DocID10938 Rev 3
100
1000
5/11
50 0
Package information
2
STTH30R06
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
6/11
Epoxy meets UL94, V0
Cooling method: by conduction (C)
Recommended torque value: 0.55 N·m (DO-247)
Recommended torque value: 0.9 to 1.2 N·m (DOP3I)
Maximum torque value: 1.0 N·m (DO-247)
DocID10938 Rev 3
Package information
STTH30R06
2.1
DO-247 package information
Figure 12: DO-247 package outline
DocID10938 Rev 3
7/11
Package information
STTH30R06
Table 6: DO-247 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Max.
Min.
Max.
A
4.85
5.15
0.191
0.203
D
2.20
2.60
0.086
0.102
E
0.40
0.80
0.015
0.031
F
1.00
1.40
0.039
0.055
F2
F3
2.00 typ.
2.00
G
0.078 typ.
2.40
0.078
10.90 typ.
0.094
0.429 typ.
H
15.45
15.75
0.608
0.620
L
19.85
20.15
0.781
0.793
L1
3.70
4.30
0.145
0.169
L2
L3
18.50 typ.
14.20
0.728 typ.
14.80
0.559
0.582
L4
34.60 typ.
1.362 typ.
L5
5.50 typ.
0.216 typ.
M
2.00
V
3.00
0.078
5°
V2
Dia.
8/11
Inches
5°
60°
3.55
0.118
60°
3.65
DocID10938 Rev 3
0.139
0.143
Package information
STTH30R06
2.2
DOP-3I package information
Figure 13: DOP-3I package outline
Table 7: DOP-3I package mechanical data
Dimensions
Ref.
A
b
Millimeters
Inches
Min.
Max.
Min.
Max.
4.40
4.60
0.173
0.181
1.20
1.40
0.047
0.055
c
1.45
1.55
0.057
0.061
c1
0.50
0.70
0.020
0.028
D
12.15
13.10
0.474
0.516
E
15.10
15.50
0.594
0.610
E1
7.55
7.75
0.297
0.305
e
10.80
11.30
0.425
0.445
G
20.4
21.10
0.815
0.831
L
14.35
15.60
0.565
0.614
P
4.08
4.17
0.161
0.164
Q
2.70
2.90
0.106
0.114
R
Y
4.60
15.80
0.181
16.50
DocID10938 Rev 3
0.622
0.650
9/11
Ordering information
3
STTH30R06
Ordering information
Table 8: Ordering information
4
Order code
Marking
Package
Weight
Base qty.
Delivery mode
STTH30R06PI
STTH30R06W
STTH30R06PI
DOP-3I
4.46 g
30
Tube
STTH30R06W
DO-247
4.40 g
30
Tube
Revision history
Table 9: Document revision history
10/11
Date
Revision
Changes
18-Oct-2004
1
Initial release.
07-Sep-2011
2
Updated IFSM from 160 A to 300 A.
17-May-2017
3
Removed SOD-93 and TO-220AC package information.
DocID10938 Rev 3
STTH30R06
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2017 STMicroelectronics – All rights reserved
DocID10938 Rev 3
11/11
很抱歉,暂时无法提供与“STTH30R06D”相匹配的价格&库存,您可以联系我们找货
免费人工找货