STTH30R06P

® STTH30R06 TURBO 2 ULTRAFAST HIGH VOLTAGE RECTIFIER Table 1: Main Product Characteristics IF(AV) VRRM Tj VF (typ) trr (max) FEATURES AND BENEFITS ■ ■ ■ ■ 30 A 600 V 175°C 1.10 V 50 ns K A K A TO-220AC STTH30R06D DO-247 STTH30R06W Ultrafast switching Low reverse current Low thermal resistance Reduces switching & conduction losses A K A K DESCRIPTION The STTH30R06, which is using ST Turbo 2 600V technology, is specially suited for use in switching power supplies, and industrial applications, as rectification and discontinuous mode PFC boost diode. SOD-93 STTH30R06P DOP3I STTH30R06PI Table 2: Order Codes Part Number STTH30R06D STTH30R06W STTH30R06P STTH30R06PI Marking STTH30R06D STTH30R06W STTH30R06P STTH30R06PI Table 3: Absolute Ratings (limiting values) Symbol VRRM IF(RMS) IF(AV) IFSM Tstg Tj Parameter Repetitive peak reverse voltage RMS forward voltage TO-220AC / DO-247 Tc = 115°C δ = 0.5 Average forward current / SOD-93 DOP3I Tc = 85°C δ = 0.5 Surge non repetitive forward current Storage temperature range Maximum operating junction temperature tp = 10ms sinusoidal Value 600 50 30 160 -65 to + 175 175 Unit V A A A °C °C October 2004 REV. 0C 1/8 STTH30R06 Table 4: Thermal Resistance Symbol Rth(j-c) Junction to case Parameter TO-220AC / DO-247/ SOD-93 DOP3I Value (max). 1.1 1.7 Unit °C/W Table 5: Static Electrical Characteristics Symbol IR * Parameter Test conditions VR = VRRM 80 IF = 30A 1.10 Min. Typ Max. 25 800 1.85 1.40 V Unit µA Reverse leakage current Tj = 25°C Tj = 150°C VF ** Forward voltage drop Tj = 25°C Tj = 150°C Pulse test: * tp = 5 ms, δ < 2% ** tp = 380 µs, δ < 2% To evaluate the conduction losses use the following equation: P = 1.07 x IF(AV) + 0.011 IF (RMS) 2 Table 6: Dynamic Characteristics Symbol trr Parameter Reverse recovery time Reverse recovery current Forward recovery time Forward recovery voltage Tj = 25°C Test conditions IF = 0.5A Irr = 0.25A IR =1A IF = 1A dIF/dt = 50 A/µs VR =30V Tj = 125°C IF = 30A VR = 400V dIF/dt = 100 A/µs Tj = 25°C Tj = 25°C IF = 30A dIF/dt = 100 A/µs VFR = 1.1 x VFmax IF = 30A dIF/dt = 100 A/µs VFR = 1.1 x VFmax 2.5 50 8 Min. Typ Max. Unit 50 70 11 500 A ns V ns IRM tfr VFP Figure 1: Conduction losses versus average forward current P(W) 55 50 45 40 35 30 Figure 2: Forward voltage drop versus forward current IFM(A) 200 δ = 0.5 δ = 0.2 δ = 0.1 δ = 0.05 δ=1 180 160 140 120 100 Tj=150°C (typical values) Tj=150°C (maximum values) 25 20 15 10 5 0 0 5 10 15 20 25 30 35 80 Tj=25°C (maximum values) T 60 40 IF(AV)(A) δ=tp/T tp 20 0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 VFM(V) 1.8 2.0 2.2 2.4 2.6 2.8 3.0 2/8 STTH30R06 Figure 3: Relative variation of thermal impedance junction to case versus pulse duration Zth(j-c)/Rth(j-c) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 1.E-03 1.E-02 1.E-01 1.E+00 Single pulse Figure 4: Peak reverse recovery current versus dIF/dt (typical values) IRM(A) 30 VR=400V Tj=125°C IF=2 x IF(AV) IF=IF(AV) IF=0.5 x IF(AV) 25 20 IF=0.25 x IF(AV) 15 10 5 tp(s) 0 0 50 100 150 200 dIF/dt(A/µs) 250 300 350 400 450 500 Figure 5: Reverse recovery time versus dIF/dt (typical values) trr(ns) 200 VR=400V Tj=125°C Figure 6: Reverse recovery charges versus dIF/dt (typical values) Qrr(µC) 3.0 VR=400V Tj=125°C 2.5 IF=2 x IF(AV) 150 IF=2 x IF(AV) IF=IF(AV) IF=0.5 x IF(AV) 2.0 IF=IF(AV) 100 1.5 1.0 50 0.5 IF=0.5 x IF(AV) dIF/dt(A/µs) 0 0 200 400 600 800 1000 0.0 0 200 dIF/dt(A/µs) 400 600 800 1000 Figure 7: Softness factor versus dIF/dt (typical values) S factor 0.6 IF≤2 x IF(AV) VR=400V Tj=125°C Figure 8: Relative variations of dynamic parameters versus junction temperature 2.50 2.25 2.00 S factor 0.5 IF=IF(AV) VR=400V Reference: Tj=125°C 0.4 1.75 1.50 0.3 1.25 1.00 0.2 0.75 0.1 0.50 QRR IRM dIF/dt(A/µs) 0.0 0 50 100 150 200 250 300 350 400 450 500 0.25 0.00 25 50 Tj(°C) 75 100 125 3/8 STTH30R06 Figure 9: Transient peak forward voltage versus dIF/dt (typical values) VFP(V) 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 800 IF=IF(AV) Tj=125°C Figure 10: Forward recovery time versus dIF/dt (typical values) tfr(ns) 700 600 500 400 300 200 100 IF=IF(AV) VFR=1.1 x VF max. Tj=125°C dIF/dt(A/µs) 0 100 200 300 400 500 0 100 dIF/dt(A/µs) 200 300 400 500 Figure 11: Junction capacitance versus reverse voltage applied (typical values) C(pF) 1000 F=1MHz VOSC=30mVRMS Tj=25°C 100 VR(V) 10 1 10 100 1000 4/8 STTH30R06 Figure 12: DO-247 Package Mechanical Data DIMENSIONS Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 4.85 5.15 0.191 0.203 D 2.20 2.60 0.086 0.102 E 0.40 0.80 0.015 0.031 F 1.00 1.40 0.039 0.055 F2 2.00 0.078 F3 2.00 2.40 0.078 0.094 G 10.90 0.429 H 15.45 15.75 0.608 0.620 L 19.85 20.15 0.781 0.793 L1 3.70 4.30 0.145 0.169 L2 18.50 0.728 L3 14.20 14.80 0.559 0.582 L4 34.60 1.362 L5 5.50 0.216 M 2.00 3.00 0.078 0.118 V 5° 5° V2 60° 60° Dia. 3.55 3.65 0.139 0.143 V REF. Dia. V H A L5 L L2 L4 F2 L3 F3 V2 F G M E L1 D Figure 13: SOD-93 Package Mechanical Data DIMENSIONS Millimeters Inches Min. Max. Min. Max. 4.70 4.90 0.185 0.193 1.17 1.37 0.046 0.054 2.50 Typ. 0.098 Typ. 1.27 Typ. 0.050 Typ. 0.50 0.78 0.020 0.031 1.10 1.30 0.043 0.051 1.75 Typ. 0.069 Typ 10.80 11.10 0.425 0.437 14.70 15.20 0.578 0.598 12.20 0.480 16.20 0.638 18.0 Typ 0.709 Typ. 3.95 4.15 0.156 0.163 31.00 Typ. 1.220 Typ. 4.00 4.10 0.157 0.161 REF. A C D D1 E F F3 G H L L2 L3 L5 L6 O 5/8 STTH30R06 Figure 14: TO-220AC Package Mechanical Data REF. DIMENSIONS Millimeters Inches Min. Max. Min. Max. 4.40 4.60 0.173 0.181 1.23 1.32 0.048 0.051 2.40 2.72 0.094 0.107 0.49 0.70 0.019 0.027 0.61 0.88 0.024 0.034 1.14 1.70 0.044 0.066 4.95 5.15 0.194 0.202 10.00 10.40 0.393 0.409 16.40 typ. 0.645 typ. 13.00 14.00 0.511 0.551 2.65 2.95 0.104 0.116 15.25 15.75 0.600 0.620 6.20 6.60 0.244 0.259 3.50 3.93 0.137 0.154 2.6 typ. 0.102 typ. 3.75 3.85 0.147 0.151 H2 C L5 ØI L6 L2 D A L7 L9 F1 L4 F G M E A C D E F F1 G H2 L2 L4 L5 L6 L7 L9 M Diam. I Figure 15: DOP3I Package Mechanical Data DIMENSIONS REF. A B C D E F G H K L N P R Millimeters Min. 4.4 1.45 14.35 0.5 2.7 15.8 20.4 15.1 3.4 4.08 10.8 1.20 Max. 4.6 1.55 15.60 0.7 2.9 16.5 21.1 15.5 3.65 4.17 11.3 1.40 Inches Min. 0.173 0.057 0.565 0.020 0.106 0.622 0.815 0.594 0.134 0.161 0.425 0.047 Max. 0.181 0.061 0.614 0.028 0.114 0.650 0.831 0.610 0.144 0.164 0.444 0.055 4.60 typ. 0.181 typ. 6/8 STTH30R06 Table 7: Ordering Information Ordering type STTH30R06D STTH30R06W STTH30R06P STTH30R06PI ■ ■ ■ ■ Marking STTH30R06D STTH30R06W STTH30R06P STTH30R06PI Package TO-220AC DO-247 SOD-93 DOP3I Weight 1.90 g 4.40 g 3.79 g 4.46 g Base qty 50 30 30 30 Delivery mode Tube Tube Tube Tube Epoxy meets UL94, V0 Cooling method: by conduction (C) Recommended torque value: 0.55 m.N. (TO-220AC) Maximum torque value: 0.70 m.N. (TO-220AC) Table 8: Revision History Date 18-Oct-2004 Revision 1 First issue Description of Changes 7/8 STTH30R06 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2004 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8