STTH30S06W

STTH30S06 Turbo 2 ultrafast high voltage rectifier Datasheet  production data Features ■ Ultrafast switching ■ Low reverse current ■ Low thermal resistance ■ Reduces switching and conduction losses ■ ECOPACK®2 compliant component Description The STTH30S06, which uses ST turbo 2, 600 V technology, is especially suited for use in switching power supplies and industrial applications, as rectification and continuous mode PCF boost diode. DO-247 STTH30S06W Table 1. January 2013 This is information on a product in full production. Doc ID 023787 Rev 1 Device summary Symbol Value IF(AV) 30 A VRRM 600 V trr (max) 50 ns Tj -40 to +175 °C VF (typ) 1.75 V 1/7 www.st.com 7 Characteristics 1 STTH30S06 Characteristics Table 2. Absolute ratings (limiting values, at 25 °C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 600 V IF(RMS) Forward rms current 64 A IF(AV) Average forward current,  = 0.5 Tc = 65 °C 30 A IFSM Surge non repetitive forward current tp = 10 ms sinusoidal 180 A Tstg Storage temperature range -65 to + 175 °C Maximum operating junction temperature -40 to + 175 °C Tj Table 3. Thermal resistance Symbol Rth(j-c) Table 4. Parameter Junction to case Value Unit 1.25 °C / W Static electrical characteristics Symbol Parameter Test conditions IR (1) Reverse leakage current VF (2) Forward voltage drop Tj = 25 °C Min. Typ Max. Unit 50 Tj = 125 °C Tj = 25 °C VR = VRRM µA 50 500 3.6 Tj = 125 °C IF = 30 A V 1.75 2.2 1. Pulse test: tp = 5 ms,  < 2% 2. Pulse test: tp = 380 µs,  < 2% To evaluate the conduction losses use the following equation: P = 1.45 x IF(AV) + 0.025 IF2(RMS) Table 5. Symbol Parameter Test conditions IRM Reverse recovery current I = 30 A, VR = 400 V Tj = 125 °C F dIF/dt = -100 A/µs Sfactor trr tfr VFP 2/7 Dynamic electrical characteristics Softness factor Reverse recovery time Min. Typ 4 IF = 1 A, VR = 30 V dIF/dt = -50 A/µs Forward recovery voltage IF = 30 A, VFR = 2.6 V dIF/dt = 300 A/µs Doc ID 023787 Rev 1 Unit 5.5 A 0.35 50 IF = 0.5 A, Irr = 0.25 A, Tj = 25 °C I = 1 A R Forward recovery time Max. 30 ns 100 3.7 V STTH30S06 Figure 1. Characteristics Average forward power dissipation Figure 2. versus average forward current IFM(A) PF(AV)(W) 100 Forward voltage drop versus forward current δ = 0.05 δ = 0.1 δ = 0.5 δ = 0.2 1000.0 δ=1 Tj=125°C (Maximum values) 80 100.0 Tj=125 °C (Typical values) 60 Tj=25 °C (Maximum values) 10.0 40 1.0 T 20 IF(AV)(A) δ = tp/T tp VFM (V) 0.1 0 0 5 Figure 3. 10 15 20 25 30 35 0.0 40 1.0 Relative variation of thermal Figure 4. impedance junction to case versus pulse duration Zth(j-c)/Rth(j-c) 2.0 3.0 4.0 5.0 6.0 Peak reverse recovery current versus dIF/dt (typical values) IRM(A) 1.0 16 0.9 14 IF=I F(AV) VR=400 V Tj=125 °C 0.8 12 0.7 10 0.6 0.5 8 0.4 6 0.3 4 0.2 Single pulse 2 0.1 dIF/dt(A/µs) tp(s) 0 0.0 1.E-04 1.E-03 Figure 5. 1.E-02 1.E-01 1.E+00 0 50 Reverse recovery time versus dIF/dt Figure 6. (typical values) trr(ns) 100 150 200 250 300 350 400 450 500 Reverse recovery charges versus dIF/dt (typical values) QRR(nC) 350 100 IF = IF(AV) VR = 400 V Tj = 125°C 90 IF = IF(AV) VR = 400 V Tj = 125°C 300 80 250 70 60 200 50 150 40 30 100 20 50 10 dIF/dt(A/µs) dIF/dt(A/µs) 0 0 0 50 100 150 200 250 300 350 400 450 500 0 50 Doc ID 023787 Rev 1 100 150 200 250 300 350 400 450 500 3/7 Characteristics Figure 7. STTH30S06 Reverse recovery softness factor versus dIF/dt (typical values) S factor Figure 8. Relative variation of dynamic parameters versus junction temperature 2.5 0.6 IF=IF(AV) VR=400 V Reference: T j=125 °C SFACTOR IF = IF(AV) VR = 400 V Tj = 125°C 0.5 2.0 0.4 1.5 0.3 1.0 0.2 IRM 0.5 0.1 dIF/dt(A/µs) QRR Tj(°C) 0.0 0.0 0 50 100 Figure 9. 150 200 250 300 350 400 450 500 Transient peak forward voltage versus dIF/dt (typical values) 50 75 100 125 Figure 10. Forward recovery time versus dIF/dt (typical values) tfr(ns) VFP(V) 100 6.0 5.0 25 IF=IF(AV) VFR=2.6 V Tj=125 °C IF=IF(AV) Tj=125 °C 80 4.0 60 3.0 40 2.0 20 1.0 dIF/dt(A/µs) 0.0 200 250 300 350 400 450 dIF/dt(A/µs) 500 0 200 250 300 350 400 Figure 11. Junction capacitance versus reverse voltage applied (typical values) C(pF) 1000 F=1 MHz VOSC=30 mVRMS Tj=25 °C 100 VR(V) 10 1 4/7 10 100 Doc ID 023787 Rev 1 1000 450 500 STTH30S06 2 Package information Package information ● Epoxy meets UL94, V0 ● Cooling method: by conduction (C) ● Recommended torque value: 0.55 N·m (1.0 N·m maximum) In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 6. DO-247 dimensions Dimensions Ref. Millimeters Min. V Dia V Typ. Inches Max. Min. Typ. Max. A 4.85 5.15 0.191 0.203 D 2.20 2.60 0.086 0.102 E 0.40 0.80 0.015 0.031 F 1.00 1.40 0.039 0.055 F2 2.00 0.078 A H F3 2.00 G 2.40 0.078 10.90 0.094 0.429 L5 L L2 L4 F2 L3 15.45 15.75 0.608 0.620 L 19.85 20.15 0.781 0.793 L1 3.70 4.30 0.169 L2 L1 F3 L3 D V2 F G H M E 0.145 18.50 14.20 0.728 14.80 0.559 0.582 L4 34.60 1.362 L5 5.50 0.216 M 2.00 3.00 0.078 0.118 V 5° 5° V2 60° 60° Dia. Doc ID 023787 Rev 1 3.55 3.65 0.139 0.143 5/7 Ordering information 3 Ordering information Table 7. 4 Ordering information Ordering type Marking Package Weight Base qty Delivery mode STTH30S06W STTH30S06W DO-247 4.40 g 30 Tube Revision history Table 8. 6/7 STTH30S06 Document revision history Date Revision 17-Jan-2013 1 Changes First issue. Doc ID 023787 Rev 1 STTH30S06 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2013 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 023787 Rev 1 7/7