STTH31AC06SPF

STTH31AC06S Turbo 2 ultrasoft high voltage rectifier Datasheet - production data Description $ The STTH31AC06S, implementing a new technology with very high softness during the reverse commutation, is suitable as a boost diode in PFC. This device is highly recommended in air conditioning equipment for continuous mode interleaved power factor correction. . $ Table 1. Device summary 72// $ . $ $ . $ 723) Features Symbol Value IF(AV) 30 A VRRM 600 V trr (typ.) 45 ns VF (typ.) 1.35 V Tj (max.) 175 °C  Ultrafast switching  Low reverse recovery current  High thermal resistance  Reduces switching losses  ECOPACK®2 compliant component March 2016 This is information on a product in full production. DocID026969 Rev 2 1/10 www.st.com Characteristics 1 STTH31AC06S Characteristics Table 2. Absolute ratings (limiting values at 25 °C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 600 V IF(RMS) Forward rms current 45 A IF(AV) Average forward current 30 A IFSM Surge non repetitive forward current 150 A Tstg Storage temperature range -40 to +175 °C 175 °C Value Unit Tj tp = 10 ms sinusoidal Maximum operating junction temperature Table 3. Thermal parameters Symbol Rth(j-c) Parameter TO-247 LL 1.25 TO-3PF 2.9 Junction to case °C/W Table 4. Static electrical characteristics Symbol Parameter IR(1) Reverse leakage current VF(2) Forward voltage drop Test conditions Tj = 25 °C Tj = 150 °C Tj = 25 °C Tj = 150 °C Min. Max. Unit 10 VR = VRRM IF = 30 A 1. Pulse test: tp = 5 ms, δ < 2% 2. Pulse test: tp = 380 µs, δ < 2% To evaluate the conduction losses use the following equation: P = 1.24 x IF(AV) + 0.017 IF2(RMS) 2/10 Typ. DocID026969 Rev 2 µA 20 200 1.55 2.00 1.35 1.75 V STTH31AC06S Characteristics Table 5. Recovery characteristics Symbol trr Reverse recovery time IRM Reverse recovery current QRR Reverse recovery charges Sfactor tfr VFP Test conditions Parameter Tj = 25 °C IF = 1 A, VR= 30A, dIF/dt = -100 A/µs I = 30 A, VR = 400 V, Tj = 150 °C F dIF/dt = -1000 A/µs Softness factor 45 65 ns 36 A 2.5 µC 2.2 Forward recovery time Forward recovery voltage Min. Typ. Max. Unit Tj = 25 °C IF = 30 A, VFR = 2.5 V, dIF/dt = 500 A/µs DocID026969 Rev 2 150 5.5 ns V 3/10 10 Characteristics STTH31AC06S Figure 1. Average forward power dissipation versus average forward current 3 :  )$9 Figure 2. Forward voltage drop versus forward current (typical values) ,)$ į    į  į   į    į  7M ƒ&  7M ƒ&   7   į WS7      WS   ,) $ $9   Figure 3. Forward voltage drop versus forward current (maximum values) ,)$  9)9         Figure 4. Relative variation of thermal impedance, junction to case, versus pulse duration (TO-247 LL) =WKMF5WKMF      7M ƒ&  7M ƒ&  6LQJOHSXOVH      9)9           Figure 5. Relative variation of thermal impedance, junction to case, versus pulse duration (TO-3PF)   ( W3V ( ( ( ( Figure 6. Junction capacitance versus reverse voltage applied (typical values) &S) =WKMF5WKMF  ) 0+] 9  P9  26&  506 7  ƒ& M     6LQJOHSXOVH      ( 4/10 W3V ( ( ( ( ( ( 959   DocID026969 Rev 2    STTH31AC06S 2 Package information Package information  Epoxy meets UL94, V0  Cooling method: by conduction (C)  Recommended torque value: 0.8 N·m  Maximum torque value: 1.0 N·m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 2.1 TO-247 LL package information Figure 7. TO-247 LL package outline +HDWVLQNSODQH $ + ' 9 / / / ',$ ', / / 0 ) / )    * ) (    %DFNYLHZ 9 3URMHFWLRQ 3URMHFWLR 9 DocID026969 Rev 2 5/10 10 Package information STTH31AC06S Table 6. TO-247 LL package mechanical data Dimensions Ref. Millimeters Min. Max. Min. Typ Max. A 4.90 5.15 0.192 0.202 D 1.85 2.10 0.072 0.082 E 0.55 0.67 0.021 0.026 F 1.07 1.32 0.042 0.051 F1 1.90 2.38 0.074 0.093 F2 2.87 3.38 0.11 0.133 G 10.90 BSC 0.429 BSC H 15.77 16.02 0.62 0.63 L 20.82 21.07 0.81 0.82 L1 4.16 4.47 0.163 0.175 L2 5.49 5.74 0.216 0.225 L3 20.05 20.30 0.789 0.799 L4 3.68 3.93 0.144 0.154 L5 6.04 6.29 0.237 0.247 M 2.25 2.55 0.088 0.10 V 10° 10° V1 3° 3° V3 20° 20°  6/10 Typ. Inches 3.55 3.66 DocID026969 Rev 2 0.139 0.143 STTH31AC06S TO-3PF package information Figure 8. TO-3PF package outline $ + & / ',$ 2.2 Package information / / / / / 1 ); ' ' 5 / ); ( * * 3URMHFWLRQ DocID026969 Rev 2 7/10 10 Package information STTH31AC06S Table 7. TO-3PF package mechanical data Dimensions Ref. Millimeters Min. Max. Min. Typ. Max. A 5.30 5.70 0.2 0.22 C 2.80 3.20 0.11 0.12 D 3.10 3.50 0.12 0.13 D1 1.80 2.20 0.07 0.08 E 0.80 1.10 0.03 0.04 F 0.65 0.95 0.025 0.037 F2 1.80 2.20 0.07 0.08 G 10.30 11.50 0.40 0.45 G1 8/10 Typ. Inches 5.45 H 15.30 L 9.80 L2 0.21 15.70 0.60 10.20 0.38 22.20 22.80 0.87 0.90 L3 26.30 26.70 1.03 1.05 L4 43.20 44.40 1.70 1.74 L5 4.30 4.70 0.16 1.18 L6 24.30 24.70 0.95 0.97 L7 14.60 15 0.57 0.59 N 1.80 2.20 0.07 0.08 R 3.80 4.20 0.14 0.16 Dia 3.40 3.80 0.13 0.15 10 DocID026969 Rev 2 0.61 0.39 0.40 STTH31AC06S 3 Ordering information Ordering information Table 8. Ordering information 4 Order code Marking Package Weight Base qty. Delivery mode STTH31AC06SWL STTH31AC06SWL TO-247 LL 4.36 g 30 Tube STTH31AC06SPF TH31AC06 TO-3PF 5.6 30 Tube Revision history Table 9. Document revision history Date Revision Changes 30-Sep-2014 1 First release. 23-Mar-2016 2 Added TO-3PF package information. DocID026969 Rev 2 9/10 10 STTH31AC06S IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved 10/10 DocID026969 Rev 2