STTH5R06
Turbo 2 ultrafast high voltage rectifier
Datasheet - production data
K
A
Description
The device is developed using ST's Turbo 2
600 V technology. It is well-suited as a boost
diode, especially for use in continuous mode
power factor corrections and hard switching
conditions.
K
A
A
TO-220AC
K
K
TO-220FPAC
This device is also intended for use as a free
wheeling diode in power supplies and other
power switching applications.
Table 1: Device summary
K
A
D²PAK
NC
K
K
A
NC
DPAK
Symbol
Value
IF(AV)
5A
VRRM
600 V
Tj (max.)
175 °C
VF (typ.)
1.40 V
trr (max.)
25 ns
A
NC
Features
Ultrafast switching
Low reverse recovery current
Reduces switching losses
Low thermal resistance
Insulated package: TO-220FPAC
Insulation voltage: 2000 VRMS sine
ECOPACK®2 compliant component for
DPAK on demand
October 2016
DocID7976 Rev 12
This is information on a product in full production.
1/17
www.st.com
Characteristics
1
STTH5R06
Characteristics
Table 2: Absolute ratings (limiting values at 25 °C, unless otherwise specified)
Symbol
VRRM
Parameter
Value
Unit
600
V
Repetitive peak reverse voltage
IF(RMS)
Forward rms current
TC = 135 °C
Average forward current
δ = 0.5, square wave
IF(AV)
TC = 105 °C
IFSM
Surge non repetitive forward
current
Tstg
Storage temperature range
Tj
TO-220AC
TO-220FPAC
D²PAK
20
DPAK
10
TO-220AC
DPAK
D²PAK
5
A
50
A
-65 to +175
°C
175
°C
Max. value
Unit
A
TO-220FPAC
tp = 10 ms sinusoidal
Maximum operating junction temperature
Table 3: Thermal parameter
Symbol
Parameter
TO-220AC / DPAK / D²PAK
3.0
TO-220FPAC
5.5
Junction to case
Rth(j-c)
°C/W
Table 4: Static electrical characteristics
Symbol
Parameter
Test conditions
IR(1)
Reverse leakage current
VF(2)
Forward voltage drop
Tj = 25 °C
Tj = 125 °C
Tj = 25 °C
Tj = 125 °C
VR = VRRM
IF = 5 A
Notes:
(1)Pulse
test: tp = 5 ms, δ < 2%
(2)Pulse
test: tp = 380 µs, δ < 2%
To evaluate the conduction losses, use the following equation:
P = 1.164 x IF(AV) + 0.128 x IF2(RMS)
2/17
DocID7976 Rev 12
Min.
Typ.
-
20
25
-
Max.
250
2.9
1.4
1.8
Unit
µA
V
STTH5R06
Characteristics
Table 5: Dynamic electrical characteristics
Symbol
trr
IRM
Sfactor
Parameter
Reverse recovery
time
Test conditions
IF = 0.5 A
Irr = 0.25 A
IR = 1 A
Tj = 25 °C
Reverse recovery
current
Softness factor
Qrr
Reverse recovery
charges
tfr
Forward recovery
time
VFP
Forward recovery
voltage
Min.
Tj = 125 °C
Tj = 25 °C
-
IF = 5 A
VFR = 1.1 x VF(max.)
dIF/dt = 40 A/µs
DocID7976 Rev 12
Max.
Unit
25
ns
IF = 1 A
VR = 30 V
dIF/dt = -50 A/µs
IF = 5 A
VR = 400 V
dIF/dt = -200 A/µs
Typ.
-
40
-
5.0
6.0
A
-
0.35
-
-
110
nC
-
150
ns
-
4.5
V
3/17
Characteristics
1.1
STTH5R06
Characteristics (curves)
Figure 2: Forward voltage drop versus forward
current
Figure 1: Conduction losses versus average
current
P(W)
13
δ = 0.1
δ = 0.05
δ = 0.2
δ = 0.5
12
11
δ=1
10
9
8
7
6
5
4
T
3
2
IF(AV)(A)
1
0
0
1
2
3
δ =tp/T
4
5
tp
6
7
Figure 3: Relative variation of thermal impedance
junction to case versus pulse duration
(TO-220AC, DPAK, D²PAK)
1.0
Zth(j-c) /R th(j-c)
Figure 4: Relative variation of thermal impedance
junction to case versus pulse duration
(TO-220FPAC)
1.0
0.9
0.9
0.8
0.8
0.7
0.7
0.6
δ = 0.5
0.6
0.5
δ = 0.5
0.5
0.4
δ = 0.2
0.3
δ = 0.1
0.4
T
0.2
0.1
Zth (j-c) /R th(j-c )
Single pulse
δ = 0.2
0.2
δ = 0.1
δ=tp/T
1.E-02
1.E-01
tp
1.E+00
I (A )
22 R M
1.E-03
IF =2 x I F(AV )
8
30
6
20
4
4/17
I = I (AV)
F F
I = 0.5 x I (AV)
F
F
10
2
0
I = 2 x I (AV)
F
F
40
IF =0.25 x I F(AV )
1.E+01
VR = 400V
Tj = 125°C
50
IF =0.5 x I F(AV )
12
10
1.E+00
tp
t rr(ns)
60
IF =I F(AV )
14
1.E-01
70
18
16
1.E-02
δ = t p/T
Figure 6: Reverse recovery time versus dIF/dt
(typical values)
80
VR =400V
Tj =125°C
t p(s )
S ingle puls e
0.0
Figure 5: Peak reverse recovery current versus
dIF/dt (typical values)
20
T
0.1
t p (s)
0.0
1.E-03
0.3
dIF/d t(A /µs)
dIF/d t(A /µs)
0
200
400
600
0
800
1000
DocID7976 Rev 12
0
200
400
600
800
1000
STTH5R06
Characteristics
Figure 7: Reverse recovery charges versus dIF/dt
(typical values)
Qrr (nC)
350
Figure 8: Softness factor versus dIF/dt
(typical values)
S factor
0.70
I = I (AV)
VR = 400V
Tj = 125°C
300
F
F
F
V = 400 V
0.60
I = 2 x I (AV)
R
T = 125 °C
F
j
250
0.50
I = I (AV)
200
F
F
0.40
150
0.30
I = 0.5 x I (AV)
F
100
F
0.20
50
dI F / dt (A /µs)
dI F/dt(A/µs )
0.10
0
0
200
400
600
800
1000
Figure 9: Relative variations of dynamic
parameters versus junction temperature
0
200
400
600
800
1000
Figure 10: Transient peak forward voltage versus
dIF/dt (typical values)
20
VF P(V )
I = I (AV)
18
F
F
Tj = 125 °C
16
14
12
10
8
6
4
2
0
Figure 11: Forward recovery time versus dIF/dt
(typical values)
120
tfr(ns)
dIF/d t(A /µs)
0
100
200
300
400
500
Figure 12: Junction capacitance versus reverse
voltage applied (typical values)
C (pF)
100
I = I (AV)
F
V
100
FR
F = 1 MHz
F
= 1.1 x V max
V
F
Tj = 125 °C
osc
= 30 V
FMS
Tj = 25 °C
80
60
40
20
VR (V)
dIF/d t(A /µ s)
10
0
0
100
200
300
400
500
DocID7976 Rev 12
1
10
100
1000
5/17
Characteristics
STTH5R06
Figure 13: Thermal resistance junction to ambient
versus copper surface under tab (DPAK)
6/17
Figure 14: Thermal resistance junction to ambient
versus copper surface under tab (D²PAK)
DocID7976 Rev 12
Package information
STTH5R06
2
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
2.1
Cooling method: by conduction (C)
Epoxy meets UL 94,V0
Recommended torque value: 0.55 N·m (for TO-220FPAC / TO-220AC)
Maximum torque value: 0.7 N·m (for TO-220FPAC / TO-220AC)
TO-220AC package information
Figure 15: TO-220AC package outline
DocID7976 Rev 12
7/17
Package information
STTH5R06
Table 6: TO-220AC package mechanical data
Dimensions
Ref.
Millimeters
Min.
Max.
Min.
Max.
A
4.40
4.60
0.173
0.181
C
1.23
1.32
0.048
0.051
D
2.40
2.72
0.094
0.107
E
0.49
0.70
0.019
0.027
F
0.61
0.88
0.024
0.034
F1
1.14
1.70
0.044
0.066
G
4.95
5.15
0.194
0.202
H2
10.00
10.40
0.393
0.409
L2
16.40 typ.
0.645 typ.
L4
13.00
14.00
0.511
0.551
L5
2.65
2.95
0.104
0.116
L6
15.25
15.75
0.600
0.620
L7
6.20
6.60
0.244
0.259
L9
3.50
3.93
0.137
0.154
M
Diam
8/17
Inches
2.6 typ.
3.75
0.102 typ.
3.85
DocID7976 Rev 12
0.147
0.151
Package information
STTH5R06
2.2
TO-220FPAC package information
Figure 16: TO-220FPAC package outline
A
B
H
Dia
L6
L2
L7
L3
L5
F1
D
L4
F
E
G1
G
DocID7976 Rev 12
9/17
Package information
STTH5R06
Table 7: TO-220FPAC package mechanical data
Dimensions
Ref.
Millimeters
Min.
Max.
Min.
Max.
A
4.40
4.60
0.173
0.181
B
2.50
2.70
0.098
0.106
D
2.50
2.75
0.098
0.108
E
0.45
0.70
0.018
0.027
F
0.75
1.00
0.030
0.039
F1
1.15
1.70
0.045
0.067
G
4.95
5.20
0.195
0.205
G1
2.40
2.70
0.094
0.106
H
10.00
10.40
0.393
L2
10/17
Inches
16.00 typ.
0.409
0.630 typ.
L3
28.60
30.60
0.126
1.205
L4
9.80
10.60
0.386
0.417
L5
2.90
3.60
0.114
0.142
L6
15.90
16.40
0.626
0.646
L7
9.00
9.30
0.354
0.366
Dia.
3.00
3.20
0.118
0.126
DocID7976 Rev 12
Package information
STTH5R06
2.3
DPAK package information
Figure 17: DPAK package outline
This package drawing may slightly differ from the physical package. However, all
the specified dimensions are guaranteed.
DocID7976 Rev 12
11/17
Package information
STTH5R06
Table 8: DPAK package mechanical data
Dimensions
Ref.
Millimeters
Inches
Min.
Max.
Min.
Max.
A
2.18
2.40
0.085
0.094
A1
0.90
1.10
0.035
0.043
A2
0.03
0.23
0.001
0.009
b
0.64
0.90
0.025
0.035
b4
4.95
5.46
0.194
0.215
c
0.46
0.61
0.018
0.024
c2
0.46
0.60
0.018
0.023
D
5.97
6.22
0.235
0.244
D1
4.95
5.60
0.194
0.220
E
6.35
6.73
0.250
0.265
E1
4.32
5.50
0.170
0.216
e
2.286 typ.
0.090 typ.
e1
4.40
4.70
0.173
0.185
H
9.35
10.40
0.368
0.409
L
1.0
1.78
0.039
0.070
L2
1.27
0.050
L4
0.60
1.02
0.023
0.040
V2
-8°
+8°
-8°
+8°
Figure 18: DPAK recommended footprint (dimensions in mm)
12/17
DocID7976 Rev 12
Package information
STTH5R06
2.4
D²PAK package information
Figure 19: D²PAK package outline
DocID7976 Rev 12
13/17
Package information
STTH5R06
Table 9: D²PAK package mechanical data
Dimensions
Ref.
Millimeters
Min.
Max.
Min.
Typ.
Max.
A
4.40
4.60
0.173
0.181
A1
0.03
0.23
0.001
0.009
b
0.70
0.93
0.028
0.037
b2
1.14
1.70
0.045
0.067
c
0.45
0.60
0.018
0.024
c2
1.23
1.36
0.048
0.053
D
8.95
9.35
0.352
0.368
D1
7.50
7.75
8.00
0.295
0.305
0.315
D2
1.10
1.30
0.051
0.060
E
10
E1
8.50
E2
6.85
e
1.50
0.043
10.40
0.394
8.70
8.90
0.335
0.343
0.346
7.05
7.25
0.266
0.278
0.282
2.54
0.409
0.100
e1
4.88
5.28
0.190
0.205
H
15
15.85
0.591
0.624
J1
2.49
2.69
0.097
0.106
L
2.29
2.79
0.090
0.110
L1
1.27
1.40
0.049
0.055
L2
1.30
1.75
0.050
0.069
R
V2
14/17
Typ.
Inches
0.4
0°
0.015
8°
DocID7976 Rev 12
0°
8°
Package information
STTH5R06
Figure 20: D²PAK recommended footprint (dimensions are in mm)
DocID7976 Rev 12
15/17
Ordering information
3
STTH5R06
Ordering information
Table 10: Ordering information
Order code
4
Marking
Package
Weight
Base qty.
Delivery mode
STTH5R06D
STTH5R06D
TO-220AC
1.90 g
50
Tube
STTH5R06G-TR
STTH5R06G
D²PAK
1.48 g
1000
Tape and reel
STTH5R06FP
STTH5R06FP
TO-220FPAC
1.90 g
50
Tube
STTH5R06B
STTH5 R06B
DPAK
0.30 g
75
Tube
STTH5R06B-TR
STTH5 R06B
DPAK
0.30 g
2500
Tape and reel
Revision history
Table 11: Document revision history
16/17
Date
Revision
Changes
17-Feb-2011
9
Last issue.
01-Aug-2014
10
Added insulated package text in Features. Corrected
typographical errors in Table 10. Updated TO-220FPAC,
D2PAK and DPAK package information and reformatted
to current standard.
18-Sep-2014
11
Updated Figure 18, Figure 19 and Table 4.
19-Oct-2016
12
Updated DPAK package information and reformatted to
current standard.
DocID7976 Rev 12
STTH5R06
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2016 STMicroelectronics – All rights reserved
DocID7976 Rev 12
17/17
很抱歉,暂时无法提供与“STTH5R06D”相匹配的价格&库存,您可以联系我们找货
免费人工找货