STD10P6F6, STF10P6F6,
STP10P6F6, STU10P6F6
P-channel -60 V, 0.13 Ω typ., -10 A STripFET™ F6
Power MOSFETs in DPAK, TO-220FP, TO-220 and IPAK packages
Datasheet − production data
Features
TAB
Order codes
3
VDS
RDS(on) max
ID
-60 V
0.16 Ω
-10 A
STD10P6F6
1
3
DPAK
1
2
STF10P6F6
STP10P6F6
TO-220FP
STU10P6F6
TAB
TAB
• Very low on-resistance
• Very low gate charge
3
2
3
1
2
1
• High avalanche ruggedness
IPAK
TO-220
• Low gate drive power loss
Figure 1. Internal schematic diagram
, TAB
Applications
• Switching applications
Description
These devices are P-channel Power MOSFETs
developed using the STripFET™ F6 technology,
with a new trench gate structure. The resulting
Power MOSFETs exhibit very low RDS(on) in all
packages.
AM11258v1
Table 1. Device summary
Order codes
Marking
Package
Packing
DPAK
Tape and reel
STD10P6F6
STF10P6F6
TO-220FP
10P6F6
STP10P6F6
TO-220
STU10P6F6
IPAK
July 2015
This is information on a product in full production.
DocID022967 Rev 5
Tube
1/24
www.st.com
Contents
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3
Test circuits
4
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5
2/24
............................................... 9
4.1
DPAK package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.2
DPAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.3
TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.4
TO-220 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.5
IPAK package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
DocID022967 Rev 5
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
1
Electrical ratings
Electrical ratings
Table 2. Absolute maximum ratings
Value
Symbol
Parameter
DPAK
IPAK
Unit
TO-220FP
TO-220
VDS
Drain-source voltage
-60
V
VGS
Gate-source voltage
± 20
V
Drain current (continuous) at TC = 25 °C
-10
A
Drain current (continuous) at TC = 100 °C
-7.2
A
IDM (2)
Drain current (pulsed)
-40
A
PTOT
Total dissipation at TC = 25 °C
EAS
Single pulse avalanche energy
(starting TJ=25 °C, ID=-3 A, VDD=40 V)
VISO
Insulation withstand voltage (RMS) from all
three leads to external heat sink
(t=1 s; TC=25 °C)
VDG
Drain-gate voltage (VGS = 0)
Tstg
Storage temperature
ID
(1)
ID
Tj
35
20
30
W
80
mJ
2500
V
-20
V
-55 to 175
°C
175
°C
Max. operating junction temperature
1. Limited by package
2. Pulse width limited by safe operating area
Table 3. Thermal data
Value
Symbol
Parameter
Unit
DPAK
Rthj-case
Thermal resistance junction-case max
Rthj-amb
Thermal resistance junction-ambient max
Rthj-pcb
Thermal resistance junction-pcb
max(1)
IPAK
4.29
100
50
TO-220FP TO-220
7.5
5
°C/W
62.5
62.5
°C/W
°C/W
1. When mounted on 1 inch2 FR-4, 2 Oz copper board
DocID022967 Rev 5
3/24
24
Electrical characteristics
2
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
Electrical characteristics
(TCASE = 25 °C unless otherwise specified).
Table 4. Static
Symbol
V(BR)DSS
Parameter
Test conditions
Drain-source breakdown
Voltage
ID = -250 µA, VGS= 0 V
Min.
Typ.
Max.
-60
Unit
V
VDS = -60 V
-1
µA
VDS = -60 V, Tc = 125 °C
-10
µA
±100
nA
-4
V
0.13
0.16
Ω
Min.
Typ.
Max.
Unit
-
340
-
pF
-
40
-
pF
-
20
-
pF
-
6.4
-
nC
-
1.7
-
nC
-
1.7
-
nC
Min.
Typ.
Max.
Unit
-
64
-
ns
-
5.3
-
ns
-
14
-
ns
-
3.7
-
ns
IDSS
Zero gate voltage drain
current (VGS = 0)
IGSS
Gate body leakage current
(VDS = 0)
VGS = ±20 V
VGS(th)
Gate threshold voltage
VDS = VGS, ID = -250 µA
RDS(on)
Static drain-source onresistance
VGS = -10 V, ID = -5 A
-2
Table 5. Dynamic
Symbol
Parameter
Ciss
Input capacitance
Coss
Output capacitance
Crss
Reverse transfer
capacitance
Qg
Total gate charge
Qgs
Gate-source charge
Qgd
Gate-drain charge
Test conditions
VDS = -48 V, f=1 MHz,
VGS = 0 V
VDD = -30 V, ID = -10 A
VGS = -10 V
(see Figure 16)
Table 6. Switching on/off (inductive load)
Symbol
td(on)
tr
td(off)
tf
4/24
Parameter
Test conditions
Turn-on delay time
Rise time
Turn-off delay time
VDD = -48 V, ID = -5 A,
RG = 4.7 Ω, VGS = -10 V
(see Figure 15)
Fall time
DocID022967 Rev 5
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
Electrical characteristics
Table 7. Source drain diode
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Source-drain current
-
-10
A
ISDM(1)
Source-drain current (pulsed)
-
-40
A
VSD(2)
Forward on voltage
ISD = -5 A, VGS = 0 V
-
-1.1
V
trr
Reverse recovery time
-
20
ns
Qrr
Reverse recovery charge
-
17.8
nC
IRRM
Reverse recovery current
ISD = -10 A,
di/dt = -100 A/µs,
VDD = -48 V
(see Figure 17)
-
-1.8
A
ISD
1. Pulse width limited by safe operating area.
2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%
DocID022967 Rev 5
5/24
24
Electrical characteristics
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
2.1
Electrical characteristics (curves)
Note:
For the P-channel Power MOSFET, current and voltage polarities are reversed.
Figure 2. Safe operating area for DPAK, TO-220
and IPAK
Figure 3. Thermal impedance DPAK, TO-220
and IPAK
AM15408v1
ID
(A)
10
GIPG180420141107SA
K
δ=0.5
0.2
100µs
is
1
th
is
in a
ion y m
at
er d b
p
O
ite
Lim
0.1
1ms
ea
a r (on)
DS
R
x
0.05
10 -1
10ms
0.02
Tj= 175°C
Tc=25°C
0.1
pcb
0.01
Single pulse
Single
pulse
0.01
0.1
10
1
VDS(V)
Figure 4. Safe operating area for TO-220FP
AM15492v1
ID
(A)
10 -2
10 -5
10 -1
10 -2
10 -3
10 -4
tp(s)
Figure 5. Thermal impedance for TO-220FP
AM15493v1
K
δ=0.5
10
is
ea )
ar S(on
is
th RD
x
in
n ma
o
ti
y
ra d b
e
e
p
O mit
Li
1
100µs
1ms
10 -1
0.05
0.02
10ms
Tj= 175°C
Tc=25°C
Single pulse
0.01
Single
pulse
0.1
0.1
10
1
VDS(V)
Figure 6. Output characteristics
10 -4
10 -3
VGS= 10 V
10 -1
tp(s)
AM15346v1
ID
(A)
VDS= 9 V
25
25
VGS= 6 V
20
10 -2
Figure 7. Transfer characteristics
AM15340v1
ID
(A)
10 -2
10 -5
20
15
15
VGS= 5 V
10
10
5
0
0
6/24
5
VGS= 4 V
5
0
10
VDS(V)
DocID022967 Rev 5
2
3
4
5
6
7
8
9
10 VGS(V)
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
Figure 8. Gate charge vs gate-source voltage
AM15341v2
VGS
(V)
VDD=30V
10
ID=10A
Electrical characteristics
Figure 9. Static drain-source on-resistance
AM15350v1
RDS(on)
(mΩ)
VGS=10V
180
8
160
6
140
4
120
2
0
0
2
4
Qg(nC)
6
Figure 10. Capacitance variations
100
1
2
3
4
5
6
7
8
9
ID(A)
Figure 11. Normalized V(BR)DSS vs temperature
C
(pF)
400
AM15342v1
350
Ciss
AM15349v1
V(BR)DSS
(norm)
1.15
ID = 1mA
1.10
300
250
1.05
200
1
150
100
0.95
50
0
0
10
20
30
40
Coss
Crss
50 VDS(V)
Figure 12. Normalized gate threshold voltage vs
temperature
AM15344v1
VGS(th)
(norm)
0.90
-55 -30 -5
20 45 70 95 120
TJ(°C)
Figure 13. Normalized on-resistance vs
temperature
AM15350v1
RDS(on)
(norm)
2
1.10
VGS=10V
1.8
ID=250 µA
1
1.6
1.4
0.90
1.2
1
0.80
0.8
0.70
0.60
-55 -30 -5
0.6
20 45 70 95 120
TJ(°C)
0.4
-55 -30 -5
DocID022967 Rev 5
20 45 70 95 120
TJ(°C)
7/24
24
Electrical characteristics
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
Figure 14. Source-drain diode forward
characteristics
AM15345v1
VSD
(V)
TJ=-55°C
1.05
TJ=25°C
0.95
0.85
0.75
TJ=175°C
0.65
0.55
8/24
2
4
6
DocID022967 Rev 5
8
ISD(A)
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
3
Test circuits
Test circuits
Figure 15. Switching times test circuit for
resistive load
Figure 16. Gate charge test circuit
AM11255v1
AM11256v1
Figure 17. Test circuit for diode recovery
behaviour
AM11257v1
DocID022967 Rev 5
9/24
24
Package information
4
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
4.1
DPAK package information
Figure 18. DPAK (TO-252) type C package outline
¡
BBW\SHB&
10/24
DocID022967 Rev 5
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
Package information
Table 8. DPAK (TO-252) type C package mechanical data
mm
Dim.
Min.
Typ.
Max.
A
2.20
2.30
2.38
A1
0.90
1.01
1.10
A2
0.00
0.10
b
0.72
0.85
b4
5.13
c
0.47
0.60
c2
0.47
0.60
D
6.00
D1
5.25
E
5.33
5.46
6.10
6.20
6.50
6.60
6.70
e
2.186
2.286
2.386
E1
4.70
H
9.80
10.10
10.40
L
1.40
1.50
1.70
L1
L2
2.90 REF
0.90
1.25
L3
L4
0.51 BSC
0.60
0.80
L6
1.00
1.80 BSC
Θ1
5°
7°
9°
Θ2
5°
7°
9°
V2
0°
8°
DocID022967 Rev 5
11/24
24
Package information
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
Figure 19. DPAK (TO-252) footprint (a)
)3B4
a. All dimensions are in millimeters
12/24
DocID022967 Rev 5
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
4.2
Package information
DPAK packing information
Figure 20. Tape for DPAK (TO-252)
10 pitches cumulative
tolerance on tape +/- 0.2 mm
T
P0
Top cover
tape
P2
D
E
F
B1
K0
For machine ref. only
including draft and
radii concentric around B0
W
B0
A0
P1
D1
User direction of feed
R
Bending radius
User direction of feed
AM08852v1
DocID022967 Rev 5
13/24
24
Package information
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
Figure 21. Reel for DPAK (TO-252)
T
REEL DIMENSIONS
40mm min.
Access hole
At sl ot location
B
D
C
N
A
Full radius
G measured at hub
Tape slot
in core for
tape start 25 mm min.
width
AM08851v2
Table 9. DPAK (TO-252) tape and reel mechanical data
Tape
Reel
mm
mm
Dim.
Dim.
Min.
Max.
A0
6.8
7
A
B0
10.4
10.6
B
1.5
12.1
C
12.8
1.6
D
20.2
G
16.4
50
B1
14/24
Min.
Max.
330
13.2
D
1.5
D1
1.5
E
1.65
1.85
N
F
7.4
7.6
T
K0
2.55
2.75
P0
3.9
4.1
Base qty.
2500
P1
7.9
8.1
Bulk qty.
2500
P2
1.9
2.1
R
40
T
0.25
0.35
W
15.7
16.3
DocID022967 Rev 5
18.4
22.4
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
4.3
Package information
TO-220FP package information
Figure 22. TO-220FP package outline
7012510_Rev_K_B
DocID022967 Rev 5
15/24
24
Package information
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
Table 10. TO-220FP mechanical data
mm
Dim.
Min.
Typ.
A
4.4
4.6
B
2.5
2.7
D
2.5
2.75
E
0.45
0.7
F
0.75
1
F1
1.15
1.70
F2
1.15
1.70
G
4.95
5.2
G1
2.4
2.7
H
10
10.4
L2
16/24
Max.
16
L3
28.6
30.6
L4
9.8
10.6
L5
2.9
3.6
L6
15.9
16.4
L7
9
9.3
Dia
3
3.2
DocID022967 Rev 5
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
4.4
Package information
TO-220 package information
Figure 23. TO-220 type A package outline
BW\SH$B5HYB7
DocID022967 Rev 5
17/24
24
Package information
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
Table 11. TO-220 type A mechanical data
mm
Dim.
Min.
Typ.
A
4.40
4.60
b
0.61
0.88
b1
1.14
1.70
c
0.48
0.70
D
15.25
15.75
D1
18/24
Max.
1.27
E
10
10.40
e
2.40
2.70
e1
4.95
5.15
F
1.23
1.32
H1
6.20
6.60
J1
2.40
2.72
L
13
14
L1
3.50
3.93
L20
16.40
L30
28.90
∅P
3.75
3.85
Q
2.65
2.95
DocID022967 Rev 5
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
4.5
Package information
IPAK package information
Figure 24. IPAK (TO-251) type A package outline
0068771_L
DocID022967 Rev 5
19/24
24
Package information
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
Table 12. IPAK (TO-251) type A mechanical data
mm.
DIM
min.
typ.
A
2.20
2.40
A1
0.90
1.10
b
0.64
0.90
b2
b4
0.95
5.20
B5
5.40
0.30
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
E
6.40
6.60
e
e1
2.28
4.40
H
20/24
max.
4.60
16.10
L
9.00
9.40
L1
0.80
1.20
L2
0.80
V1
10°
DocID022967 Rev 5
1.00
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
Package information
Figure 25. IPAK (TO-251) type C package outline
7\SH&5HY/
DocID022967 Rev 5
21/24
24
Package information
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
Table 13. IPAK (TO-251) type C mechanical data
mm
Dim.
min.
typ.
max.
A
2.20
2.30
2.35
A1
0.90
1.00
1.10
b
0.66
0.79
b2
22/24
0.90
b4
5.23
c
0.46
0.59
c2
0.46
0.59
D
6.00
6.10
6.20
D1
5.20
5.37
5.55
E
6.50
6.60
6.70
E1
4.60
4.78
4.95
e
2.20
2.25
2.30
e1
4.40
4.50
4.60
H
16.18
16.48
16.78
L
9.00
9.30
9.60
L1
0.80
1.00
1.20
L2
0.90
1.08
1.25
θ1
3°
5°
7°
θ2
1°
3°
5°
DocID022967 Rev 5
5.33
5.43
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
5
Revision history
Revision history
Table 14. Document revision history
Date
Revision
10-May-2012
1
First release.
20-Jun-2012
2
Updated title on the cover page.
Updated all parameter values in Table 5, Table 6 and Figure 1.
3
– Added: TO-220FP and IPAK packages
– Updated: RDS(on) value in cover page, Rthj-case values, Table 5, 6
and 7 typical values
– Updated mechanical data only for DPAK in Section 4: Package
information
4
– Updated: Figure 2 and 3
– Updated: Section 4.1: DPAK package information and Section 4.4:
TO-220 package information
– Minor text changes
5
–
–
–
–
17-May-2013
24-Apr-2014
27-Jul-2015
Changes
All voltage and current polarities inverted
Added: note in Section 2.1: Electrical characteristics (curves)
Updated: Section 4.1 and Section 4.5
Text and formatting changes throughout document
DocID022967 Rev 5
23/24
24
STD10P6F6, STF10P6F6, STP10P6F6, STU10P6F6
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics – All rights reserved
24/24
DocID022967 Rev 5