STV-676-E01

STV-676-E01 ® Evaluation Kit for the STV0676 CMOS Imaging Digital Processor DATA BRIEFING Features Minimum Requirements ■ Up to 30 frames per second VGA ● IBM ■ 352 x 288 (CIF) and 640 x 480 (VGA) resolution sensors supplied ● Windows ■ Supports multiple output image formats ● Graphics ■ Low power consumption (less than 100mA for VGA at 30fps) ■ I²C control and digiport output for embedded applications ■ USB 1.1 compliant ■ High quality MJPEG compression PC (P200MMX minimum specification) or compatible with USB port 98 Operating System Adapter capable of 800x600 resolution, 64k colours (“thousands of colours”) ● CDROM ● Adobe ● PC drive Acrobat Reader software with full specification parallel port Technical documentation ■ DirectShow V2.0 driver, ■ WinXP WHQL certified. Datasheet ■ VfW application via VfW/DS mapper STV0676 - CMOS digital camera co-mpanion processor User manuals Description The STV0676 Evaluation Kit (EVK) allows the user to demonstrate the images available from the STV0676 imaging digital signal processor when used with the VV6501 or VV6411 CMOS image sensors with VGA or CIF resolution respectively. Drivers included in the EVK permit to view the video output over USB. For embedded applications the EVK allows I2C control via a PC parallel port and video data output, in YCrCb, RGB preview or MJPEG modes, on the STV0676 8-wire digiport. The EVK also includes the following: ● Evaluation ● VV6411 and VV6501 sensor daughter boards cable ● User manual 2C to parallel port cable ● CD-ROM with application software, maps and scripts for the user to adjust the STV0676 settings. October 2003 Dual mode camera reference design for STV0676 companion processor and VV6501 VGA CMOS sensor Ordering Information Sale type Description STV-676-E01 Evaluation kit for STV0676 imaging digital signal processor VV6501C001 CMOS image sensor with VGA resolution STV-676/501C-R01 Reference design for STV0676 digital processor and VV6501 CMOS image sensor with VGA output resolution STV0676 CMOS digital camera companion processor board, ● USB ●I User manual for STV-676-E01 evaluation kit for STV0676 used with CIF or VGA CMOS image sensors. 1/2 STV-676-E01 STV0676 EVK board SW5 GPIO J8 SW3 SW4 SW 0 SW 1 The black bar represents the switch location Power in J3 USB Connector J5 Digiport J6 Slave I2C J7 SW1 (high) SW2 (low) SW1 and SW2 are set low when the jumper closest to the board edge is used. Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 2003 STMicroelectronics - All Rights Reserved Purchase of I2C Components by STMicroelectronics conveys a license under the Philips I2C Patent. Rights to use these components in an I2C system is granted provided that the system conforms to the I2C Standard Specification as defined by Philips. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel -Italy - Japan - Malaysia - MaltaMorocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States www.st.com 2/2