STW70N10F4

STB70N10F4, STD70N10F4 STP70N10F4, STW70N10F4 N-channel 100 V, 0.015 Ω, 60 A, STripFET™ DeepGATE™ Power MOSFET in TO-220, DPAK, TO-247, D2PAK Features Type VDSS RDS(on) max ID STB70N10F4 100 V < 0.0195 Ω 65 A STD70N10F4 100 V < 0.0195 Ω 60 A STP70N10F4 100 V < 0.0195 Ω 65 A STW70N10F4 100 V < 0.0195 Ω 65 A ■ Exceptional dv/dt capability ■ Extremely low on-resistance RDS(on) ■ 3 2 3 1 1 2 TO-220 TO-247 3 3 1 1 100% avalanche tested DPAK D²PAK Application ■ Figure 1. Switching applications Internal schematic diagram Description $ This STripFET™ DeepGATE™ Power MOSFET technology is among the latest improvements, which have been especially tailored to minimize on-state resistance, with a new gate structure, providing superior switching performance. ' 3 !-V Table 1. Device summary Order codes Marking Package Packaging STB70N10F4 70N10F4 D²PAK Tape and reel STD70N10F4 70N10F4 DPAK Tape and reel STP70N10F4 70N10F4 TO-220 Tube STW70N10F4 70N10F4 TO-247 Tube October 2009 Doc ID 15207 Rev 3 1/18 www.st.com 18 Contents STB/D/P/W70N10F4 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2/18 ............................................... 9 Doc ID 15207 Rev 3 STB/D/P/W70N10F4 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter TO-220, TO-247, D²PAK Unit DPAK VDS Drain-source voltage (VGS = 0) 100 V VGS Gate-source voltage ± 20 V ID Drain current (continuous) at TC = 25 °C 65 60 A ID Drain current (continuous) at TC = 100 °C 46 43 A Drain current (pulsed) 260 240 A Total dissipation at TC = 25 °C 150 125 W 1 0.83 W/°C IDM (1) PTOT Derating factor EAS (2) Tstg Tj Single pulse avalanche energy 120 mJ – 55 to 175 °C Storage temperature Max. operating junction temperature 1. Pulse width limited by safe operating area 2. Starting Tj = 25 °C, ID= 32.5 A, VDD= 45 V Table 3. Thermal data Value Symbol Parameter Rthj-case Thermal resistance junction-case max Rthj-a Thermal resistance junction-ambient max Tl Maximum lead temperature for soldering purpose Unit TO-220, TO-247, D²PAK DPAK 1 1.2 °C/W 62.5 50 (1) °C/W 300 °C 1. When mounted on FR-4 board of 1 inch², 2 oz Cu Doc ID 15207 Rev 3 3/18 Electrical characteristics 2 STB/D/P/W70N10F4 Electrical characteristics (TCASE = 25 °C unless otherwise specified) Table 4. Symbol Parameter V(BR)DSS Drain-source Breakdown voltage Test conditions ID = 250 µA, VGS = 0 Min. Typ. Max. 100 Unit V VDS = max rating 1 µA VDS = max rating,TC=125 °C 100 µA Gate-body leakage current (VDS = 0) VGS = ± 20 V 100 nA VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA 4 V RDS(on) Static drain-source on resistance VGS = 10 V, ID = 30 A 0.015 0.0195 Ω Typ. Max. Unit IDSS Zero gate voltage Drain current (VGS = 0) IGSS Table 5. Symbol Parameter Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Qg Total gate charge Qgs Gate-source charge Qgd Gate-drain charge Symbol 2 Dynamic Ciss Table 6. 4/18 On/off states Test conditions Min. 5800 VDS = 25 V, f = 1 MHz, VGS = 0 VDD = 80 V, ID = 65 A, VGS = 10 V (see Figure 16) - - 300 pF - pF 190 pF 85 nC 20 - 25 nC nC Switching times Parameter Test conditions Min. Typ. Max. Unit td(on) tr Turn-on delay time Rise time VDD = 50 V, ID = 30 A RG = 4.7 Ω VGS = 10 V (see Figure 15) - 30 20 - ns ns td(off) tf Turn-off-delay time Fall time VDD = 50 V, ID = 30 A, RG = 4.7 Ω, VGS = 10 V (see Figure 15) - 65 20 - ns ns Doc ID 15207 Rev 3 STB/D/P/W70N10F4 Table 7. Symbol ISD Electrical characteristics Source drain diode Parameter Test conditions Min. Source-drain current ISDM Source-drain current (pulsed) VSD (2) Forward on voltage ISD = 60 A, VGS = 0 - Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 60 A, VDD = 25 V di/dt = 100 A/µs, Tj = 150 °C (see Figure 17) - IRRM Max Unit 60 A 240 A 1.5 V - (1) trr Qrr Typ. 80 280 6.7 ns nC A 1. Pulse width limited by safe operating area. 2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5% Doc ID 15207 Rev 3 5/18 Electrical characteristics STB/D/P/W70N10F4 2.1 Electrical characteristics (curves) Figure 2. Safe operating area for TO-220, TO-247, D²PAK Figure 3. Thermal impedance for TO-220, TO-247, D²PAK Figure 5. Thermal impedance for DPAK Figure 7. Transfer characteristics AM03243v1 S( o 100 n) O Li per m at ite io d ni by n m this ax a R rea D is ID (A) 10 100µs 1ms 10ms Tj=175°C Tc=25°C 1 Single pulse 0.1 0.1 Figure 4. 10 1 100 VDS(V) Safe operating area for DPAK AM03245v1 ) D S( 100 on O Li per m at ite io d ni by n m this ax a R rea is ID (A) 10 100µs 1ms 10ms Tj=175°C Tc=25°C 1 0.1 0.1 Figure 6. Single pulse 10 1 100 VDS(V) Output characteristics AM03168v1 ID (A) 160 VGS=10V AM03169v1 ID (A) VDS=6V 160 140 6V 120 120 100 80 80 60 5V 40 40 20 0 0 6/18 2 4 6 8 VDS(V) 0 0 Doc ID 15207 Rev 3 2 4 6 8 VGS(V) STB/D/P/W70N10F4 Figure 8. Electrical characteristics Normalized BVDSS vs temperature AM03170v1 BVDSS (norm) VGS=0 ID=250µA Figure 9. Static drain-source on resistance AM03176v1 RDS(on) (mΩ) VGS=10V 15.5 1.1 15.0 14.5 1.0 14.0 13.5 13.0 0.9 12.5 0.8 -75 25 -25 75 100 125 TJ(°C) 12.0 0 5 10 15 20 25 30 35 ID(A) Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations AM03171v1 VGS (V) 12 10 AM03172v1 C (pF) Ciss VDD=50V VGS=10V ID=65A 8 1000 6 4 Coss 2 Crss 100 0 0 20 40 60 80 Figure 12. Normalized gate threshold voltage vs temperature AM03173v1 VGS(th) (norm) VDS=VGS ID=250µA 1.2 0 100 Qg(nC) 25 75 50 VDS(V) Figure 13. Normalized on resistance vs temperature AM03174v1 RDS(on) (norm) 2.2 2.0 VGS=10V ID=30A 1.8 1.0 1.6 1.4 0.8 1.2 0.6 0.8 0.6 1.0 0.4 -75 -25 25 75 125 175 TJ(°C) 0.4 0.2 -75 Doc ID 15207 Rev 3 -25 25 75 125 TJ(°C) 7/18 Electrical characteristics STB/D/P/W70N10F4 Figure 14. Source-drain diode forward characteristics VSD (V) AM03175v1 TJ=-55°C 0.9 0.8 TJ=25°C 0.7 0.6 TJ=175°C 0.5 0.4 0 8/18 5 10 15 20 25 30 ISD(A) Doc ID 15207 Rev 3 STB/D/P/W70N10F4 3 Test circuits Test circuits Figure 15. Switching times test circuit for resistive load Figure 16. Gate charge test circuit VDD 12V 47kΩ 1kΩ 100nF 3.3 µF 2200 RL µF VGS IG=CONST VDD 100Ω Vi=20V=VGMAX VD RG 2200 µF D.U.T. D.U.T. VG 2.7kΩ PW 47kΩ 1kΩ PW AM01468v1 AM01469v1 Figure 17. Test circuit for inductive load Figure 18. Unclamped inductive load test switching and diode recovery times circuit A A D.U.T. FAST DIODE B B L A D G VD L=100µH S 3.3 µF B 25 Ω 1000 µF D VDD 2200 µF 3.3 µF VDD ID G RG S Vi D.U.T. Pw AM01470v1 Figure 19. Unclamped inductive waveform AM01471v1 Figure 20. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 0 Doc ID 15207 Rev 3 10% AM01473v1 9/18 Package mechanical data 4 STB/D/P/W70N10F4 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 10/18 Doc ID 15207 Rev 3 STB/D/P/W70N10F4 Package mechanical data TO-220 type A mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q Typ 4.40 0.61 1.14 0.48 15.25 Max 4.60 0.88 1.70 0.70 15.75 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 16.40 28.90 3.75 2.65 3.85 2.95 0015988_Rev_S Doc ID 15207 Rev 3 11/18 Package mechanical data STB/D/P/W70N10F4 TO-252 (DPAK) mechanical data DIM. mm. min. typ max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 E 5.10 6.40 6.60 E1 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1 L1 2.80 L2 L4 0.80 0.60 1 R V2 0.20 8o 0o 0068772_G 12/18 Doc ID 15207 Rev 3 STB/D/P/W70N10F4 Package mechanical data TO-247 Mechanical data mm. Dim. A Min. 4.85 Typ A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e Max. 5.15 5.45 L 14.20 L1 3.70 14.80 4.30 L2 18.50 øP 3.55 3.65 øR 4.50 5.50 S 5.50 Doc ID 15207 Rev 3 13/18 Package mechanical data STB/D/P/W70N10F4 D²PAK (TO-263) mechanical data mm inch Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 Typ 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 Max Min 4.60 0.23 0.93 1.70 0.60 1.36 9.35 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 10.40 2.54 4.88 15 2.49 2.29 1.27 1.30 0.192 0.590 0.099 0.090 0.05 0.051 8° 0° 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.208 0.624 0.106 0.110 0.055 0.069 0.016 0079457_M 14/18 Max 0.1 5.28 15.85 2.69 2.79 1.40 1.75 0.4 0° Typ Doc ID 15207 Rev 3 8° STB/D/P/W70N10F4 5 Packaging mechanical data Packaging mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 12.1 0.476 1.6 0.059 0.063 B1 MIN. inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 18.4 0.645 0.724 0.059 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 MAX. D 1.5 D1 1.5 E 1.65 1.85 0.065 0.073 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 P0 3.9 4.1 0.153 0.161 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 R 40 W 15.7 0.059 0.075 0.082 1.574 16.3 0.618 0.641 Doc ID 15207 Rev 3 15/18 Packaging mechanical data STB/D/P/W70N10F4 D 2 PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B DIM. 16/18 mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 MAX. B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 0.449 0.456 F 11.4 11.6 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 Doc ID 15207 Rev 3 MIN. 330 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA inch MAX. MAX. 12.992 0.059 13.2 0.504 0.520 26.4 0.960 1.039 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STB/D/P/W70N10F4 6 Revision history Revision history Table 8. Document revision history Date Revision Changes 12-Nov-2008 1 First release 14-Jan-2009 2 Added new package, mechanical data DPAK 09-Oct-2009 3 Added new package, mechanical data D²PAK Doc ID 15207 Rev 3 17/18 STB/D/P/W70N10F4 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18 Doc ID 15207 Rev 3