STWH13009

STWH13009 High voltage fast-switching NPN power transistor Features ■ ■ ■ . High voltage capability Low spread of dynamic parameters Very high switching speed Applications ■ Switching mode power supplies 1 3 2 Description The device is manufactured using high voltage Multi Epitaxial Planar technology for high switching speeds anh high voltage capability. It uses a Hollow Emitter structure to enhance switching speeds. Figure 1. TO-247 Internal schematic diagram Table 1. Device summary Marking WH13009 Package TO-247 Packaging Tube Order code STWH13009 October 2007 Rev 1 1/9 www.st.com 9 Absolute maximum ratings STWH13009 1 Absolute maximum ratings Table 2. Symbol VCEV VCEO VEBO IC ICM IB IBM PTOT Tstg TJ Absolute maximum ratings Parameter Collector-emitter voltage (VBE = -1.5V) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Collector peak current (tp < ms) Base current Base peak current (tp < ms) Total dissipation at Tcase = 25°C Storage temperature Max. operating junction temperature Value 700 400 12 12 24 6 12 125 -65 to 150 150 Unit V V V A A A A W °C °C Table 3. Symbol Rthj-case Thermal data Parameters Thermal resistance junction-case __max Value 1 Unit °C/W 2/9 STWH13009 Electrical characteristics 2 Electrical characteristics (Tcase = 25°C; unless otherwise specified) Table 4. Symbol ICEV IEBO Electrical characteristics Parameter Collector cut-off current (V BE = -1.5V) Emitter cut-off current (IC = 0) Test conditions VCE = 700 V VCE = 700 V VEB = 10 V TC = 100°C Min. Typ. Max. 10 500 10 Unit µA µA µA Collector-emitter VCEO(sus)(1) sustaining voltage (IB = 0) IC = 10 mA IC = 4 A __ IB = 0.8 A IB = 1 A IB = 1.6 A IB = 2.4 A IB = 1 A IB = 1.6 A _ VCE =5 V _ VCE =5 V I C = 5A IB2 = -2 A 400 V VCE(sat)(1) Collector-emitter saturation voltage IC = 5 A __ IC = 8 A __ IC = 12 A _ IC = 5 A __ IC = 8 A __ IC = 5 A IC = 8 A VCC = 250 V IB1= 1 A L = 200 µH 0.2 0.25 0.35 0.6 0.5 0.6 1 2 1.2 1.6 V V V V V V VBE(sat)(1) hFE(1) Base-emitter saturation voltage DC current gain Inductive load Storage time Fall time 18 11 1.7 100 30 23 ts tf 2.5 140 µs ns 1. Pulsed duration = 300 ms, duty cycle ≥1.5%. 3/9 Electrical characteristics STWH13009 2.1 Electrical characteristic (curves) Figure 2. Safe operating area Figure 3. Derating curve Figure 4. DC current gain Figure 5. DC current gain Figure 6. Collector-emitter saturation voltage Figure 7. Base-emitter saturation voltage 4/9 STWH13009 Figure 8. Inductive load switching time Figure 9. Electrical characteristics Reverse biased safe operating area 2.2 Test circuit Figure 10. Inductive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 5/9 Package mechanical data STWH13009 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 6/9 STWH13009 Package mechanical data TO-247 Mechanical data mm. Min. 4.85 2.20 1.0 2.0 3.0 0.40 19.85 15.45 5.45 14.20 3.70 18.50 3.55 4.50 5.50 3.65 5.50 14.80 4.30 Typ Max. 5.15 2.60 1.40 2.40 3.40 0.80 20.15 15.75 Dim. A A1 b b1 b2 c D E e L L1 L2 øP øR S 7/9 Revision history STWH13009 4 Table 5. Revision history Document revision history Revision 1 Initial Release Changes Date 19-Oct-2007 8/9 STWH13009 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9