STX13005G-AP

STX13005 High voltage fast-switching NPN power transistor Features ■ High voltage capability ■ Low spread of dynamic parameters ■ Minimum lot-to-lot spread for reliable operation ■ Very high switching speed Applications ■ Compact fluorescent lamp (CFL) ■ Switch mode power supplies (AC-DC converters) TO-92 TO-92 AMMOPACK Description The device is manufactured using high voltage multi-epitaxial planar technology for high switching speeds and medium voltage capability. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA. Table 1. Figure 1. Internal schematic diagram Device summary(1) Order code Marking STX13005 X13005 STX13005G X13005G STX13005-AP X13005 STX13005G-AP X13005G Package Packaging Bulk TO-92 Ammopack 1. The letter "G" in the order code suffix identifies the product as ECOPACK®2 grade. Please see Section 4 for details. August 2009 Doc ID 9151 Rev 6 1/13 www.st.com 13 Contents STX13005 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2/13 Doc ID 9151 Rev 6 STX13005 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCES Collector-emitter voltage (VBE = 0) 700 V VCEO Collector-emitter voltage (IB = 0) 400 V VEBO Emitter-base voltage (IC = 0; IB = 1.5 A; tp < 10 ms) V(BR)EBO V Collector current 3 A Collector peak current (tP < 5ms) 6 A 1.5 A IC ICM IB Base current IBM Base peak current (tP < 5ms) 3 A Ptot Total dissipation at Tc = 25°C 2.8 W Tstg Storage temperature -65 to 150 °C 150 °C TJ Table 3. Max. operating junction temperature Thermal data Symbol Parameter Value Unit Rthj-c Thermal resistance junction-case _ _ _ ___ _ ___ max 45 °C/W Doc ID 9151 Rev 6 3/13 Electrical characteristics 2 STX13005 Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 4. Electrical characteristics Symbol Parameter Test conditions Collector cut-off current (VBE =0) ICEO Collector-cut-off current (IB = 0) VCE = 400 V V(BR)EBO Emitter base breakdown voltage (IC = 0) IE = 10 mA 9 IC =10 mA 400 VCE(sat) (1) VBE(sat) (1) hFE (1) Base-emitter saturation voltage DC current gain VCE =700 V IC = 1A Collector-emitter saturation voltage Typ. VCE =700 V ICES Collector-emitter VCEO(sus) (1) sustaining voltage (IB = 0) TC = 125°C IC = 2A _ IB = 200 mA _ _ IB = 500 mA IC = 3A IC = 1A IC = 2A Max. Unit 1 5 mA mA 1 mA 18 V V _ _ IB = 750 mA 0.5 0.6 5 V V V _ IB = 200 mA _ _ IB = 500 mA 1.2 1.6 V V IC = 1 A _ VCE = 5 V 10 30 IC = 2 A _ _ VCE = 5 V 8 24 Resistive load IC = 2 A ts Storage time IB1 = -IB2 = 400 mA 1.65 µs tf Fall time tp = 30 µs 260 ns Inductive load IC = 1 A ts Storage time IB1 = 200 mA VBE(off) = -5 V 0.8 µs tf Fall time L = 50 mH 150 ns 1. Pulse test: pulse duration ≤300 µs, duty cycle ≤2 % 4/13 Min. Doc ID 9151 Rev 6 VCC = 125 V Vclamp =300 V RBB = 0 STX13005 Electrical characteristics 2.1 Electrical characteristics (curves) Figure 2. Safe operating area @TC = 25°C Figure 3. Safe operating area @TC = 135°C Figure 4. Derating curve Figure 5. Output characteristics Figure 6. DC current gain @VCE = 1 V Figure 7. DC current gain @VCE = 5 V Doc ID 9151 Rev 6 5/13 Electrical characteristics Figure 8. STX13005 Collector-emitter saturation voltage Figure 9. Base-emitter saturation voltage Figure 10. Inductive load fall time Figure 11. Inductive load storage time Figure 12. Resistive load fall time Figure 13. Resistive load storage time 6/13 Doc ID 9151 Rev 6 STX13005 Electrical characteristics Figure 14. Reverse biased SOA Doc ID 9151 Rev 6 7/13 Test circuits 3 STX13005 Test circuits Figure 15. Inductive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 3) Fast recovery rectifier Figure 16. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 8/13 Doc ID 9151 Rev 6 STX13005 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Doc ID 9151 Rev 6 9/13 Package mechanical data Table 5. STX13005 TO-92 package mechanical data mm Dim. Min. Typ. Max. A 4.32 4.95 b 0.36 0.51 D 4.45 4.95 E 3.30 3.94 e 2.41 2.67 e1 1.14 1.40 L 12.70 15.49 R 2.16 2.41 S1 0.92 1.52 W 0.41 0.56 V Figure 17. 5° TO-92 package drawing 0102782 D 10/13 Doc ID 9151 Rev 6 STX13005 Package mechanical data TO-92 ammopack shipment (suffix”-AP”) mechanical data Dim. A1 T T1 T2 d P0 P2 F1,F2 F3 delta H W W0 W1 W2 H H3 H0 H1 D0 t L I1 delta P mm Typ Min 12.50 5.65 2.44 4.98 -2.00 17.50 5.70 8.50 Max 4.80 3.80 1.60 2.30 0.48 12.90 7.05 2.94 5.48 2.00 19.00 6.30 9.25 0.50 20.50 1.5 16.50 25.00 4.20 0.90 11.00 12.70 6.35 2.54 5.08 18.00 6.00 9.00 18.50 0.5 15.50 1 16.00 3.80 4.00 3.00 -1.00 1.00 0050910S Doc ID 9151 Rev 6 11/13 Revision history 5 STX13005 Revision history Table 6. 12/13 Document revision history Date Revision Changes 01-Jul-2004 1 First release. 11-Feb-2005 2 New table on page 1 02-Aug-2007 3 New Figure 3 and updated Figure 14 28-Sep-2007 4 Updated Figure 2 and Figure 3 16-Dec-2008 5 Added ECOPACK®2 grade products with suffix “G” 11-Aug-2009 6 Updated TO-92 mechanical data and Figure 1: Internal schematic diagram Doc ID 9151 Rev 6 STX13005 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 9151 Rev 6 13/13