STX715-AP

STX715 NPN low voltage transistor Features ■ Low voltage small device for through-hole assembly ■ High ruggedness Applications ■ Voltage regulation ■ Relay driver ■ Generic switch TO-92 TO-92(-AP) Description The STX715 is a NPN transistor manufactured using planar technology and it is housed in TO-92 small plastic package. Table 1. Figure 1. Internal schematic diagram Device summary Order codes Marking Package Packaging STX715 X715 TO-92 Bag STX715-AP X715 TO-92 Ammopack February 2010 Doc ID 8654 Rev 3 1/8 www.st.com 8 Electrical ratings 1 Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCBO Collector-base voltage (IE = 0) 140 V VCEO Collector-emitter voltage (IB = 0) 80 V VEBO Emitter-base voltage (IC = 0) 5 V 1.5 A 2 A Base current 0.3 A Base peak current (tP < 5 ms) 0.6 A PTOT Total dissipation at Tamb = 25 °C 0.9 W TSTG Storage temperature -65 to 150 °C 150 °C IC ICM IB IBM TJ Table 3. Symbol RthJA 2/8 STX715 Collector current Collector peak current (tP < 5 ms) Max. operating junction temperature Thermal data Parameter Thermal resistance junction-ambient __ Doc ID 8654 Rev 3 max Value Unit 140 °C/W STX715 2 Electrical characteristics Electrical characteristics Tcase = 25 °C unless otherwise specified. Table 4. Symbol Parameter Test conditions Min. Typ. Max. Unit ICES Collector cut-off current (VBE = 0) VCE = 140 V 500 µA ICEO Collector cut-off current (IB = 0) VCE = 80 V 1 mA IEBO Emitter cut-off current (IC = 0) VEB = 5 V 100 µA VCEO(sus) Collector-emitter sustaining voltage (IB = 0) IC = 10 mA VCE(sat) (1) Collector-emitter saturation voltage IC = 100 mA IC = 1 A IB = 10 mA IB = 100 mA 0.25 0.5 V V VBE(sat) (1) Base-emitter saturation voltage IC = 100 mA IC = 1 A IB = 10 mA IB = 100 mA 1 1.1 V V DC current gain IC = 100 µA IC = 500 mA IC = 1 A VCE = 2 V VCE = 2 V VCE = 2 V Transition frequency IC = 100 mA VCE = 10 V hFE (1) fT 1. Electrical characteristics 80 V 140 80 40 50 MHz Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 % Doc ID 8654 Rev 3 3/8 Package mechanical data 3 STX715 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 4/8 Doc ID 8654 Rev 3 STX715 Package mechanical data TO-92 bulk shipment mechanical data mm. Dim. Min. Typ. Max. A 4.32 4.95 b 0.36 0.51 D 4.45 4.95 E 3.30 3.94 e 2.41 2.67 e1 1.14 1.40 L 12.70 15.49 R 2.16 2.41 S1 0.92 1.52 W 0.41 0.56 5o V 0102782 D Doc ID 8654 Rev 3 5/8 Package mechanical data STX715 TO-92 ammopack shipment (suffix”-AP”) mechanical data Dim. A1 T T1 T2 d P0 P2 F1,F2 F3 delta H W W0 W1 W2 H H3 H0 H1 D0 t L I1 delta P mm. Typ. Min. 12.50 5.65 2.44 4.98 -2.00 17.50 5.70 8.50 12.70 6.35 2.54 5.08 18.00 6.00 9.00 18.50 0.5 15.50 1 16.00 3.80 4.00 3.00 -1.00 Max. 4.80 3.80 1.60 2.30 0.48 12.90 7.05 2.94 5.48 2.00 19.00 6.30 9.25 0.50 20.50 1.5 16.50 25.00 4.20 0.90 11.00 1.00 0050910S 6/8 Doc ID 8654 Rev 3 STX715 4 Document revision history Document revision history Table 5. Document revision history Date Revision Changes 21-Jun-2004 2 Document migration, no content change 01-Feb-2010 3 Updated package mechanical data Doc ID 8654 Rev 3 7/8 STX715 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8 Doc ID 8654 Rev 3